[?] Eplan change the posicion of the cross reference contact

[bjekas]

Hello everyone,

Im using Eplan P8 and I have a stupid question... How can I change the posicion of the cross reference contacts?



They are fixed to a Y-posicion and I would like to change this if possible!

Thx for your time,
Daniel

[van8x10]

Pls try:
- Right click on the component, select > Properties...
- On tab Display, refer to select listbox <Contact Image:> (None/In Path/On Component); Click button [...] right beside
- Change X or Y position, click OK, then Ok
- Enjoy

[Luca]

Or right click on cross reference contacts -> "Text" -> "Move property text" and then you can move it freely

[van8x10]

Or right click on cross reference contacts -> "Text" -> "Move property text" and then you can move it freely

No, it's not right. The problem is 'contact image', not 'cross reference' for component. Pls see the picture : http://postimage.org/image/d5uuq533l/

[bjekas]

Hello van8x10 and Luca.
Just tried out both your suggestions and both worked!
So simple and yet I lost at least 1 hour trying to do this...

Thanks you guys, youre the best

[van8x10]

I've checked as Luca's suggestion and I'm wong. Sorry to Luca!