840C system language

Questions about Siemens & Analog Siemens hardware.
Software & hardware exchanger
Post Reply
max_pavan
Posts: 1
Joined: Fri Jul 19, 2019 1:04 pm

840C system language

Post by max_pavan » Fri Jul 19, 2019 2:40 pm

Hello, my Diagnose page on a 840C NC displays "DEUTSCH"
How can I change it in english?

robj
Posts: 8
Joined: Sun Mar 13, 2011 8:42 am

Re: 840C system language

Post by robj » Thu Aug 22, 2019 8:41 pm

Hi,
the only 840C I've done a language change on had to have a new set of system EPROMs from Siemens.

I also had to re-do the machine builders EPROMs that contain the user menus and messages etc. for the PLC side of the system; reading those out and translating all the text elements by hand and then programming the modified data in to a set of new EPROMs for the PLC.

RJ.

geobuild
Posts: 4
Joined: Fri Apr 24, 2020 7:34 pm

Re: 840C system language

Post by geobuild » Sat Apr 25, 2020 9:26 am

Hi
Do you have a install or hard disk image for sinumerik 840 c version 6.xx?

thanks

Post Reply