-
- Posts: 1
- Joined: Tue May 06, 2014 4:40 pm
Hi,
i have a problem, i get project from my hmi. Project is in .xob format. I try to decompile this project to .mtp format using EasyBuilder8000 -> Tool -> Decompile, but i dont have password (default password - 111111 is not correct ). Mayby sombody know possibility to restore password from .xob file ?
i have a problem, i get project from my hmi. Project is in .xob format. I try to decompile this project to .mtp format using EasyBuilder8000 -> Tool -> Decompile, but i dont have password (default password - 111111 is not correct ). Mayby sombody know possibility to restore password from .xob file ?
-
- Posts: 1
- Joined: Thu Aug 21, 2014 1:03 am
I give file project*.pkg format. You can decomplie the project and send me :
baduynamduoc@gmail.com.
Help me. Thanks.
Link file : http://www.data.webdien.com/free/dow...90be216facc2c8
baduynamduoc@gmail.com.
Help me. Thanks.
Link file : http://www.data.webdien.com/free/dow...90be216facc2c8
-
- Posts: 1032
- Joined: Tue Nov 20, 2007 7:08 pm
- Location:
file project*.pkg format- This file format program eView- EV5000 from Kinco
See http://www.kinco.cn/html/en/NewsCenter/ ... 28473.html
The format differs from Weintek.
See http://www.kinco.cn/html/en/NewsCenter/ ... 28473.html
The format differs from Weintek.
-
- Posts: 1032
- Joined: Tue Nov 20, 2007 7:08 pm
- Location:
-
- Posts: 10
- Joined: Thu Feb 21, 2013 12:04 pm
Hello guys,
I have a Weintek MT8121X. I got a xob file from it but when tried to decompile, it asks for password. I tried the default 111111 but did not work. I searched the related topics but could not find anything useful.
Please help me find the password.
Thank you very much in advance.
PS: If needed, I can upload the file.
I have a Weintek MT8121X. I got a xob file from it but when tried to decompile, it asks for password. I tried the default 111111 but did not work. I searched the related topics but could not find anything useful.
Please help me find the password.
Thank you very much in advance.
PS: If needed, I can upload the file.
-
- Posts: 10
- Joined: Thu Feb 21, 2013 12:04 pm
Thanks for the suggestion, Schtiel, but I read that topic (and others) already. Unfortunately, I don't have the*.mtp file, I only have the compiled version (*.xob) which needs to be decompiled first. In order to do this, it asks for password. I downloaded the file from HMI to a USB stick.
Any help would be much appreciated.
LE: This is how I should decompile if I had the password
LLE: It could also have the "Decompilation is prohibited" checked though but I'm hoping it wasn't
Any help would be much appreciated.
LE: This is how I should decompile if I had the password
Code: Select all
http://www.imenista.com/MT8000%20HMI%20FAQ/FAQ_09_How_to_Decompile_the_xob_file_which_uploading_in_the_USB_Disk.pdf
-
- Posts: 2
- Joined: Mon Jan 28, 2013 3:39 pm
- Location:
Hi,
i have a same problem, i get project from my hmi. Project is in .xob format. I try to decompile this project to .mtp format using EasyBuilder8000 -> Tool -> Decompile, but i dont have password (default password - 111111 is not correct ). Mayby sombody know possibility to restore password from .xob file ?
help
i have a same problem, i get project from my hmi. Project is in .xob format. I try to decompile this project to .mtp format using EasyBuilder8000 -> Tool -> Decompile, but i dont have password (default password - 111111 is not correct ). Mayby sombody know possibility to restore password from .xob file ?
help
-
- Posts: 4
- Joined: Mon Jul 18, 2011 2:53 pm
-
- Posts: 9
- Joined: Tue Mar 10, 2015 2:27 am
You can go here: http://unlockplc.com/crack-plc-hmi/
Or send the XOB file to me: unlockplc123@gmail.com
Or send the XOB file to me: unlockplc123@gmail.com
-
- Posts: 2
- Joined: Sat Jan 14, 2017 6:36 am
Hello guys,
I have a Weintek MT6070iH. I uploaded a .xob file from it using EB8000 v4.66 with default password 111111 successfully, but when i tried to decompile, the same password did not work.
Can anyone help me find to find the password or convert it to .mtp file for me?
The .xob file can be uploaded from the following link:
https://files.fm/u/pbt6skt9#_
Appreciate all the help i can get, thanks very much.
I have a Weintek MT6070iH. I uploaded a .xob file from it using EB8000 v4.66 with default password 111111 successfully, but when i tried to decompile, the same password did not work.
Can anyone help me find to find the password or convert it to .mtp file for me?
The .xob file can be uploaded from the following link:
https://files.fm/u/pbt6skt9#_
Appreciate all the help i can get, thanks very much.
-
- Posts: 1032
- Joined: Tue Nov 20, 2007 7:08 pm
- Location:
Take awaychessbana wrote:but when i tried to decompile, the same password did not work.
Can anyone help me find to find the password or convert it to .mtp file for me?
https://www.sendspace.com/file/caorhk
Good luck!
-
- Posts: 7
- Joined: Mon Aug 09, 2010 1:28 pm
Hi,
I have same as problem, can,t convert from xob to mtp file.
Can help Me ?
link file:
https://www.dropbox.com/s/y5i2306miuwio ... a.xob?dl=0
Thks
Rgds
Heryanto
I have same as problem, can,t convert from xob to mtp file.
Can help Me ?
link file:
https://www.dropbox.com/s/y5i2306miuwio ... a.xob?dl=0
Thks
Rgds
Heryanto
-
- Posts: 1032
- Joined: Tue Nov 20, 2007 7:08 pm
- Location:
https://www.sendspace.com/file/nlxado
Good luck!
Good luck!
-
- Posts: 21
- Joined: Mon Jun 13, 2011 3:32 am
Dear Vlad,
Can you also help me to convert to *.mtp ?
https://www.dropbox.com/s/3ss8y9q48nmc6 ... 1.xob?dl=0
Thanks.
Can you also help me to convert to *.mtp ?
https://www.dropbox.com/s/3ss8y9q48nmc6 ... 1.xob?dl=0
Thanks.
-
- Posts: 1032
- Joined: Tue Nov 20, 2007 7:08 pm
- Location:
http://dropmefiles.com/8tGMEPanda Gendut wrote:Can you also help me to convert to *.mtp ?
Good luck!
-
- Posts: 7
- Joined: Mon Aug 09, 2010 1:28 pm
Dear Vlad,
Could help me convert file below to weintek mtp file?
https://www.dropbox.com/s/behga8j7klmfz ... a.xob?dl=0
Rgds
Heryanto
Could help me convert file below to weintek mtp file?
https://www.dropbox.com/s/behga8j7klmfz ... a.xob?dl=0
Rgds
Heryanto
-
- Posts: 1032
- Joined: Tue Nov 20, 2007 7:08 pm
- Location:
https://www.sendspace.com/file/fgohzrkhianon wrote:Could help me convert file below to weintek mtp file?
Good luck!
-
- Posts: 4
- Joined: Mon Jan 28, 2013 3:56 pm
Dear vlad,
Do you mind convert the xob file to mtp for me as well? Thanks a lot!
Regards,
douyi
https://www.mediafire.com/file/6rra62w5 ... T6100i.xob
Do you mind convert the xob file to mtp for me as well? Thanks a lot!
Regards,
douyi
https://www.mediafire.com/file/6rra62w5 ... T6100i.xob
-
- Posts: 8
- Joined: Mon Mar 29, 2010 2:17 am
-
- Posts: 1
- Joined: Mon Dec 18, 2017 7:07 am
Dear Vlad,
Kindly need your help to decompile the .xob file to mtp? Thanks in advance!
File: https://drive.google.com/file/d/10GHThh ... eK7vB/view
Regards,
Aoyon
Kindly need your help to decompile the .xob file to mtp? Thanks in advance!
File: https://drive.google.com/file/d/10GHThh ... eK7vB/view
Regards,
Aoyon
-
- Posts: 1
- Joined: Wed Mar 26, 2014 3:30 am
Dear Vlad,
Could you please decompile this xob files,
https://drive.google.com/open?id=19vhS3 ... ycmv3uUukv
Regards,
Tony
Could you please decompile this xob files,
https://drive.google.com/open?id=19vhS3 ... ycmv3uUukv
Regards,
Tony
-
- Posts: 1
- Joined: Wed Jan 23, 2019 3:12 am
Hello,
I performed a back up to a HMI WEINTEK MT6050i, but now I need to decompile de .xob file, I tried with default password 111111 and doesn't work, can you guys help me to find the password?
Thank you in advance
XOB file: https://drive.google.com/open?id=1jkr8d ... Vim42hQzvQ
I performed a back up to a HMI WEINTEK MT6050i, but now I need to decompile de .xob file, I tried with default password 111111 and doesn't work, can you guys help me to find the password?
Thank you in advance
XOB file: https://drive.google.com/open?id=1jkr8d ... Vim42hQzvQ
-
- Posts: 9
- Joined: Mon May 13, 2019 11:32 am
Hello guys,
I have a Weintek tk6070iH. I uploaded a .xob file from it using EB8000 v4.65 with default password 111111 successfully, but when i tried to decompile, the same password did not work.
Can anyone help me find to find the password or convert it
https://drive.google.com/file/d/1VhMzVc ... sp=sharing
I have a Weintek tk6070iH. I uploaded a .xob file from it using EB8000 v4.65 with default password 111111 successfully, but when i tried to decompile, the same password did not work.
Can anyone help me find to find the password or convert it
https://drive.google.com/file/d/1VhMzVc ... sp=sharing
-
- Posts: 1
- Joined: Sun May 19, 2019 2:24 pm
Hello
I have a Weintek MT510TV HMI and when trying to upload it, I was requested a password.
I tried the default password "0" (without the ") and the it did not work.
The PLC was also password protected, yet this number was available. I tried this number on the HMI and it did not work.
Is there a way how to find it?
rgds
Paul
I have a Weintek MT510TV HMI and when trying to upload it, I was requested a password.
I tried the default password "0" (without the ") and the it did not work.
The PLC was also password protected, yet this number was available. I tried this number on the HMI and it did not work.
Is there a way how to find it?
rgds
Paul
-
- Posts: 44
- Joined: Mon Jun 03, 2013 9:36 am
See this Video pleasePaul7 wrote: ↑Sun May 19, 2019 3:22 pmHello
I have a Weintek MT510TV HMI and when trying to upload it, I was requested a password.
I tried the default password "0" (without the ") and the it did not work.
The PLC was also password protected, yet this number was available. I tried this number on the HMI and it did not work.
Is there a way how to find it?
rgds
Paul
https://www.youtube.com/watch?v=HskX9Pitlhw&t=82s
-
- Posts: 2
- Joined: Mon Jun 06, 2016 9:54 am
heloo. i have file program used upload from hmi mt6070ih. i want to open it to view screes and edit, but i not open it. plese help me. thank you.
https://drive.google.com/open?id=14r8_A ... DLkjO1HzPG.
https://drive.google.com/open?id=14r8_A ... DLkjO1HzPG.