[?+]: unPassword Library in ABB Compact Control Builder

другие контроллеры
redbox23
Posts: 2
Joined: Sat Jan 11, 2014 8:07 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by redbox23 » Sat Jan 11, 2014 8:14 am

Hey Linkinx64,
if you still reading this thread, can you help me to read the code of the following Library:
http://www.filedropper.com/llafargeaddon-1-0-0
it contains some simple Function Blocks only but it's still protected...

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Sat Jan 11, 2014 9:42 am

redbox23 wrote:Hey Linkinx64,
if you still reading this thread, can you help me to read the code of the following Library:
http://www.filedropper.com/llafargeaddon-1-0-0
it contains some simple Function Blocks only but it's still protected...
I am reading this thread but you seems not. Check what I wrote about library files here viewtopic.php?f=3&t=14434#p41037 and then reupload a properly arranged archive.

redbox23
Posts: 2
Joined: Sat Jan 11, 2014 8:07 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by redbox23 » Sat Jan 11, 2014 1:18 pm

yes, i missed to include all the files in the archive, sorry for that.
i've uploaded again here http://www.filedropper.com/llafargeaddon-1-0-0_1

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Sat Jan 11, 2014 4:28 pm

redbox23 wrote:i've uploaded again here http://www.filedropper.com/llafargeaddon-1-0-0_1
I guess the password is

Code: Select all

lafaddon
P.S. Sometimes I'm too busy to answer in this thread on time. And I haven't found a successor who would like to do the same on time and voluntarily (free of charge). I think I will publish an unpassword procedure and the software I've developed for everyone... in a few days... The more so an ABB legal & integrity officer once already pushed me to do that. Also a friendly ABB developer informed that in the 800xA SV6.0 (release scheduled on summer 2014) the library protection will be changed again.

xcj_roger
Posts: 2
Joined: Fri Feb 08, 2013 1:22 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by xcj_roger » Sun Jan 12, 2014 1:27 pm

Many many thanks for LinkinX64 (gpost) (gpost) (gpost)

qft0337
Posts: 10
Joined: Fri Aug 06, 2010 9:11 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by qft0337 » Fri Mar 07, 2014 6:24 pm

Hi Linkinx64,
ABB Just released PCD5.6-1 Pce3.2-1 and Probase5.1-3 which can be installed on 800xA5.1 RevD.Can you unpassword them.
9ARD146857-250_-_en_System_800xA_Process_Control_Device_Library_5.6-1.zip
9ARD146857-251_-_en_System_800xA_Process_Control_Equipment_Library_3.2-1.zip
9ARD146857-252_-_en_System_800xA_ProBase_Library_5.1-3.zip
Thanks and Best regards.

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Sat Mar 08, 2014 5:09 pm

Thanks and Best regards.[/quote]I don't have 800xA 5.1 Rev.D yet. Could you upload it too?


Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Sun Mar 09, 2014 6:16 pm

qft0337 wrote:Hi Linkinx64,
Please find FP4 RevD from ...
I am done with download.
Here are your passwords:

Code: Select all

F_NucleusLib 3.0-1 : switchcore10110
F_RoutingkernelLib 3.0-2 : inferno10110
F_RoutingLib 3.0-2 : kropp10110
PCDeviceCoreLib 5.6-1 : Jasmine5610
PCDeviceLib 5.6-1 : Jasmine5610
PCDeviceGraphicsLib 5.6-1 : Jasmine5610
PCDeviceSupportLib 5.6-1 : Jasmine5610
PCEquipmentLib 3.2-1 : Mirella321
PCFacilityLib 3.2-1 : Mirella321

hina
Posts: 38
Joined: Tue Aug 30, 2011 8:34 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by hina » Wed Mar 12, 2014 12:48 pm

Dear All,

Please Re Upload below files because the link is dead

ARD136477-003_R01_A_en_System_800xA_5.1_FP4_RevD_Updates_with_System_Feature_Pack_Update_Tool_Part_1_of_4.zip
9ARD136477-003_R02_A_en_System_800xA_5.1_FP4_RevD_Updates_with_System_Feature_Pack_Update_Tool_Part_2_of_4.zip
9ARD136477-003_R03_A_en_System_800xA_5.1_FP4_RevD_Updates_with_System_Feature_Pack_Update_Tool_Part_3_of_4.zip
9ARD136477-003_R04_A_en_System_800xA_5.1_FP4_RevD_Updates_with_System_Feature_Pack_Update_Tool_Part_4_of_4.zip

9ARD146857-250_-_en_System_800xA_Process_Control_Device_Library_5.6-1.zip
9ARD146857-251_-_en_System_800xA_Process_Control_Equipment_Library_3.2-1.zip
9ARD146857-252_-_en_System_800xA_ProBase_Library_5.1-3.zip

Best Regards

hina
Posts: 38
Joined: Tue Aug 30, 2011 8:34 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by hina » Thu Mar 13, 2014 7:44 am

Dear qft0337,

Please Re-Upload ABB PCdevice 5.8 and Pce3.3 because link below are dead

http://www.4shared.com/zip/TXFwCmek/9AR ... m_800.html
http://www.4shared.com/zip/R7X_HFE7/9AR ... m_800.html

Best Regards


hina
Posts: 38
Joined: Tue Aug 30, 2011 8:34 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by hina » Thu Apr 17, 2014 4:33 am

Dear qft0337,

Thank you very very much

could you please re-upload for

9ARD123797-250_-_en_System_800xA_Process_Control_Device_Library_5.7-0.zip
9ARD123797-251_-_en_System_800xA_Process_Control_Equipment_Library_3.2-0.zip
PCDeviceLib 5.6.zip

I don't know why i can't download these files above

Best Regards,
Hina

nola2k
Posts: 105
Joined: Tue Nov 03, 2009 12:56 pm
Location: Europe

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by nola2k » Fri Apr 25, 2014 7:19 am

Please post passwords for all libraries in Minerals library 5.1.4

nola2k
Posts: 105
Joined: Tue Nov 03, 2009 12:56 pm
Location: Europe

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by nola2k » Sat Apr 26, 2014 6:42 am

Please post the passwords for Minerals libraries for FP4.
Many thanks in advance.
Nola2k

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Tue Apr 29, 2014 2:27 pm

Code: Select all

Copyrighted.
Last edited by Linkinx64 on Tue May 06, 2014 5:48 am, edited 1 time in total.

nola2k
Posts: 105
Joined: Tue Nov 03, 2009 12:56 pm
Location: Europe

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by nola2k » Tue Apr 29, 2014 2:40 pm

Hi, Linkinx64,
good to see you after such a long time again in the forum.
Thank you for your quick response.
Regards, nola2k

nola2k
Posts: 105
Joined: Tue Nov 03, 2009 12:56 pm
Location: Europe

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by nola2k » Tue Apr 29, 2014 3:00 pm

Unfortunately, I have an older version of BMI Library.
Is it possible to load the appropriate version for the posted passwords?
Many thanks in advance
nola2k

joseed
Posts: 8
Joined: Sun Mar 16, 2014 4:54 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by joseed » Tue May 06, 2014 2:50 am

Please passwords for libraries in Minerals library 5.1/3.a

Thanks

hina
Posts: 38
Joined: Tue Aug 30, 2011 8:34 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by hina » Sun May 11, 2014 12:23 pm

Hi all

could you please re-upload for

9ARD123797-250_-_en_System_800xA_Process_Control_Device_Library_5.7-0.zip
9ARD123797-251_-_en_System_800xA_Process_Control_Equipment_Library_3.2-0.zip
PCDeviceLib 5.6.zip

because all links are dead

Best Regards,
Hina

joseed
Posts: 8
Joined: Sun Mar 16, 2014 4:54 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by joseed » Tue May 13, 2014 3:52 am

Please passwords for libraries in Minerals library 5.1/3.a

Thanks
(tyou) (tyou)

Tomscats
Posts: 5
Joined: Fri May 16, 2014 12:44 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Tomscats » Fri May 16, 2014 5:58 am

System version 4.1.0-6

May I know the password for ControlSupportLib 1.1-1

Thanks

Tomscats
Posts: 5
Joined: Fri May 16, 2014 12:44 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Tomscats » Fri May 16, 2014 7:30 am

and how about ControlStandardLib 1.3-8 ?

joseed
Posts: 8
Joined: Sun Mar 16, 2014 4:54 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by joseed » Sun May 18, 2014 2:14 am

Hey Linkinx64 your support please passwords for libraries in Minerals library 5.1/3.a

(tyou) (tyou)

Tomscats
Posts: 5
Joined: Fri May 16, 2014 12:44 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Tomscats » Mon May 19, 2014 3:02 am

Hi Linkinx!
Would you be so kind to help me with this?

http://www.filedropper.com/pplib
http://www.filedropper.com/librarybackup

PP_ElementLib 5-0-1
PP_ElementLib
PP_FunctionLib 5-0-1
PP_PaperExpLib
PP_SimulationLib 5-0-1

thanks!

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Sun May 25, 2014 2:17 pm

Tomscats wrote:Hi Linkinx!
Would you be so kind to help me with this?

http://www.filedropper.com/pplib
http://www.filedropper.com/librarybackup

PP_ElementLib 5-0-1
PP_ElementLib
PP_FunctionLib 5-0-1
PP_PaperExpLib
PP_SimulationLib 5-0-1

thanks!
Check this topic: viewtopic.php?f=3&t=15940&p=59496

Tomscats
Posts: 5
Joined: Fri May 16, 2014 12:44 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Tomscats » Tue May 27, 2014 12:57 am

Linkinx64 wrote:
Tomscats wrote:Hi Linkinx!
Would you be so kind to help me with this?

http://www.filedropper.com/pplib
http://www.filedropper.com/librarybackup

PP_ElementLib 5-0-1
PP_ElementLib
PP_FunctionLib 5-0-1
PP_PaperExpLib
PP_SimulationLib 5-0-1

thanks!
Check this topic: viewtopic.php?f=3&t=15940&p=59496


Thanks! but the PP_SimulationLib was protected.

Tomscats
Posts: 5
Joined: Fri May 16, 2014 12:44 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Tomscats » Tue May 27, 2014 1:17 am

Thanks! but the PP_SimulationLib was protected.[/quote]


it's working....

duongvuquy
Posts: 57
Joined: Wed Jan 13, 2010 3:27 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by duongvuquy » Fri May 30, 2014 2:41 pm

qft0337 wrote:Hi all,
ABB PCdevice 5.8 and Pce3.3 already released.Can you unpassword them.
BR.
http://www.4shared.com/zip/TXFwCmek/9AR ... m_800.html
http://www.4shared.com/zip/R7X_HFE7/9AR ... m_800.html
Link above died, please reupload
Thanks

hina
Posts: 38
Joined: Tue Aug 30, 2011 8:34 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by hina » Mon Jun 02, 2014 9:45 pm

Dear All,

Please Re-Upload these file below because all link are dead

9ARD123797-250_-_en_System_800xA_Process_Control_Device_Library_5.7-0.zip
9ARD123797-251_-_en_System_800xA_Process_Control_Equipment_Library_3.2-0.zip
PCDeviceLib 5.6.zip
Min Liz CN09(Minerals Libraries AC800 5.1.4).iso

Thank and Best Regards

duongvuquy
Posts: 57
Joined: Wed Jan 13, 2010 3:27 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by duongvuquy » Tue Jun 03, 2014 1:15 pm

Hi Linkinx
Please help me on unpassword for PCDevicelib 5.2, When I restore project 5.0 sp02 on 5.1 but PCDevicelib have errors in library control builder example :Valve. I don't know why
Thanks and best regard

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Tue Jun 03, 2014 4:38 pm

duongvuquy wrote:Hi Linkinx
Please help me on unpassword for PCDevicelib 5.2, When I restore project 5.0 sp02 on 5.1 but PCDevicelib have errors in library control builder example :Valve. I don't know why
Thanks and best regard
Sorry, I've lost this version of PCDevicelib (5.2-0). If you reupload it maybe I can help. I also don't know how you got an errors in Control Builder without errors at the system upgrade phase. Provide a screenshot or upgrade logs.

hina
Posts: 38
Joined: Tue Aug 30, 2011 8:34 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by hina » Sun Jun 08, 2014 7:06 pm

Could Anyone please Re-Upload these files below because all link are dead

9ARD123797-250_-_en_System_800xA_Process_Control_Device_Library_5.7-0.zip
9ARD123797-251_-_en_System_800xA_Process_Control_Equipment_Library_3.2-0.zip
PCDeviceLib 5.6.zip
Min Liz CN09(Minerals Libraries AC800 5.1.4).iso

Thank and Best Regards

joseed
Posts: 8
Joined: Sun Mar 16, 2014 4:54 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by joseed » Tue Jun 24, 2014 2:15 am

Hey Linkinx64 your support please passwords for libraries in Minerals library 5.1/3.a

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Thu Jun 26, 2014 1:41 pm

joseed wrote:Hey Linkinx64 your support please passwords for libraries in Minerals library 5.1/3.a
Hi

here arere u'r passwords:

qft0337
Posts: 10
Joined: Fri Aug 06, 2010 9:11 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by qft0337 » Wed Jul 02, 2014 4:54 am

Hi Linkinx64,
ABB released Pcdevice 5.3-3,Can you unpassword them.
http://u.163.com/TwFxJKHk Password: xSJsgARI

Best Regards.

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Fri Jul 04, 2014 9:17 pm

qft0337 wrote:Hi Linkinx64,
ABB released Pcdevice 5.3-3,Can you unpassword them.
http://u.163.com/TwFxJKHk Password: xSJsgARI
Best Regards.
Sure. ABB like if their library passwords being exposed (thnx)

Password for the PCDevice 5.3-3 libraries:

Code: Select all

orchid5330

joseed
Posts: 8
Joined: Sun Mar 16, 2014 4:54 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by joseed » Fri Jul 11, 2014 1:26 am

Linkinx64 wrote:
joseed wrote:Hey Linkinx64 your support please passwords for libraries in Minerals library 5.1/3.a
Hi

here arere u'r passwords:
Linkinx64 your support please passwords for libraries in Minerals library 5.1/3.a, not see the for code

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Sat Jul 12, 2014 7:56 am

joseed wrote: Linkinx64 your support please passwords for libraries in Minerals library 5.1/3.a, not see the for code
Me neither ( libraries ).

giffgis
Posts: 11
Joined: Wed Aug 31, 2011 8:33 pm
Location: Chile
Contact:

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by giffgis » Tue Jul 22, 2014 8:49 pm

Dear Linkinx64:

I need unpasswrd the libraries in this link: https://www.dropbox.com/sh/skb3fmojrwx2 ... ZYDFMzyfga

I would be grateful.

regards (clap)

disney50
Posts: 1
Joined: Wed Jul 23, 2014 2:55 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by disney50 » Wed Jul 23, 2014 3:04 am

(gogle) (gogle) (gogle)
Last edited by disney50 on Fri Nov 28, 2014 3:36 pm, edited 1 time in total.

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Thu Jul 24, 2014 6:00 pm

giffgis wrote:I need unpasswrd the libraries in this link: https://www.dropbox.com/sh/skb3fmojrwx2 ... ZYDFMzyfga
Password (for all libs):

Code: Select all

ABB_Gaby_2008
-------------------------------------------------------------------------------------------------
disney50 wrote:Could you please help me unpassword below file:
http://www.filedropper.com/lib

Code: Select all

CraneAdvancedLib : vajeryttervant
CraneBasicLib : Hjulmutter
CraneStandardLib : Antisladd
CraneGrabLib : istosmall
CraneGSULib : istosmall
CraneMathLib : bo44dyllbody
CranePE: MotNarkotika
CranePSUControl: oldladyistosmall
Мотнаркотика, старушка слишком мала... Интересно, чем обдолбался тот чел, который ставил такие пароли :lol: :lol:

giffgis
Posts: 11
Joined: Wed Aug 31, 2011 8:33 pm
Location: Chile
Contact:

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by giffgis » Mon Jul 28, 2014 2:54 pm

Linkinx64 wrote:
giffgis wrote:I need unpasswrd the libraries in this link: https://www.dropbox.com/sh/skb3fmojrwx2 ... ZYDFMzyfga
Password (for all libs):

Code: Select all

ABB_Gaby_2008
-------------------------------------------------------------------------------------------------
disney50 wrote:Could you please help me unpassword below file:
http://www.filedropper.com/lib

Code: Select all

CraneAdvancedLib : vajeryttervant
CraneBasicLib : Hjulmutter
CraneStandardLib : Antisladd
CraneGrabLib : istosmall
CraneGSULib : istosmall
CraneMathLib : bo44dyllbody
CranePE: MotNarkotika
CranePSUControl: oldladyistosmall
Мотнаркотика, старушка слишком мала... Интересно, чем обдолбался тот чел, который ставил такие пароли :lol: :lol:
Thanks Master!!!!! Best regards

amit_sabby
Posts: 5
Joined: Thu Aug 09, 2012 12:44 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by amit_sabby » Tue Aug 12, 2014 1:53 pm

Dear Linkinx64:

I need unpasswrd the libraries in this link: https://www.dropbox.com/s/pqr1qvyeeu6t3kz/AL_6Hi.rar

thanks

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Linkinx64 » Thu Aug 21, 2014 6:54 pm

amit_sabby wrote: I need unpasswrd the libraries in this link: https://www.dropbox.com/s/pqr1qvyeeu6t3kz/AL_6Hi.rar
Password:

Code: Select all

jennifer
P.S. If next time I see "xxx.lbr" file without "L_xxx" folder or vice versa the password request will be ignored.

azhang_2001
Posts: 1
Joined: Tue Sep 09, 2014 7:07 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by azhang_2001 » Tue Sep 09, 2014 7:14 am

Hi Linkinx64,

Would you please help unpassword this ABB code.

https://app.box.com/s/p9vp6b5e83wmcfzcdij8

Thanks

xl7y
Posts: 1
Joined: Fri Sep 12, 2014 10:03 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by xl7y » Fri Sep 12, 2014 10:31 am

Hi Linkinx64

plz help me,i need find password for these libraries

https://onedrive.live.com/redir?resid=B ... 6175%21106

thanks in advance
xl7y

joseed
Posts: 8
Joined: Sun Mar 16, 2014 4:54 am

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by joseed » Fri Sep 19, 2014 10:51 pm

Linkinx64 your support please passwords for libraries in Minerals library 5.1/3.a

BasicLib 1.6-10
BMI_UMC22wExtSatus 10.0.0
BMIStandard 1.5-19
BMIUserDefined 10.0-0
BMIUsrDefConstAndVar 10.0-0
ControlBasicLib 1.2-5
ControlSimpleLib 1.2-3
ControlSupportLib 1.3-7

Thanks

Joseed

amit_sabby
Posts: 5
Joined: Thu Aug 09, 2012 12:44 pm

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by amit_sabby » Wed Sep 24, 2014 10:49 am

Linkinx64 wrote:
amit_sabby wrote: I need unpasswrd the libraries in this link: https://www.dropbox.com/s/pqr1qvyeeu6t3kz/AL_6Hi.rar
Password:

Code: Select all

jennifer
P.S. If next time I see "xxx.lbr" file without "L_xxx" folder or vice versa the password request will be ignored.

thanks for the help. your point well noted... my mistake...

Rudi
Posts: 8
Joined: Sun Apr 05, 2009 3:50 pm
Location: Europe

Re: [?+]: unPassword Library in ABB Compact Control Builder

Post by Rudi » Sun Nov 23, 2014 5:09 am

rmcSystemLib 7.0.0

Postby Rudi » Sat Nov 22, 2014 4:02 pm
Hi Linkinx64
Any possiblility to get the pw for this lib?
I need to see especially one FB
please. Thanx in Advance

http://www40.zippyshare.com/v/15101849/file.html

Chears!

Post Reply