[?]: not connecting to ABB ACS550
-
- Posts: 4
- Joined: Tue Oct 08, 2013 7:47 am
[?]: not connecting to ABB ACS550
while connecting through PC to OPCA-02 cable to ABB ACS550 drive, it shows error CRC.
help me how to over come this problem
iam using to connect the drive DWL2.6
help
rajesh.putta
help me how to over come this problem
iam using to connect the drive DWL2.6
help
rajesh.putta
-
- Posts: 7
- Joined: Tue Oct 08, 2013 6:01 am
Re: [?]: not connecting to ABB ACS550
I want software for AC500. Can you upload.
Regards,
Regards,
-
- Posts: 4
- Joined: Tue Oct 08, 2013 7:47 am
Re: [?]: not connecting to ABB ACS550
This soft ware is get from the forum, you can type on search box:OPCA-2, you will get links.
for for ACS550 you can use DriveWindow Light software.
see the link: Link_is_Dead :(/A ... w_v2.2.rar
rajesh
for for ACS550 you can use DriveWindow Light software.
see the link: Link_is_Dead :(/A ... w_v2.2.rar
rajesh
Re: [?]: not connecting to ABB ACS550
Check the parameters of your COM-port and drive.rajeshputta wrote:while connecting through PC to OPCA-02 cable to ABB ACS550 drive, it shows error CRC.
help me how to over come this problem
iam using to connect the drive DWL2.6
help
rajesh.putta
-
- Posts: 4
- Joined: Tue Oct 08, 2013 7:47 am
Re: [?]: not connecting to ABB ACS550
means we need to set PC COM port:27 & Drive COM setting port:27?
earlier post that time iam tested PC com Port:2 & Drive COM port:02.CRC error is shown.
regards
rajesh.p
earlier post that time iam tested PC com Port:2 & Drive COM port:02.CRC error is shown.
regards
rajesh.p
Re: [?]: not connecting to ABB ACS550
You can use port number two or anyone else, it doesn't matter.
Show the parameters of your COM-ports. And screenshot of the error.
Show the parameters of your COM-ports. And screenshot of the error.
-
- Posts: 4
- Joined: Tue Oct 08, 2013 7:47 am
Re: [?]: not connecting to ABB ACS550
Dear sir,MEFinc wrote:You can use port number two or anyone else, it doesn't matter.
Show the parameters of your COM-ports. And screenshot of the error.
sorry for my late reply,
here i can't able to upload my screen shots,
so am writing by words an error body of message:
X---------------------------------------------------------------------------X
Error occurred while identifying drive:
Following communication error while identifying drive:CRC error.
Could not identify drive.check the connections and communication settings.
X-----------------------------------------------------------------------------X
regards,
rajesh
Re: [?]: not connecting to ABB ACS550
Hmm, so poor information.
Ok, that may be problem like with communication settings (you set not correct value of com-port, use usb3.0 and ect.) or with software of your computer or sofware of drive...
For first, check this (from page #8.2): DriveWindow Light 2.93 User Guide
Ok, that may be problem like with communication settings (you set not correct value of com-port, use usb3.0 and ect.) or with software of your computer or sofware of drive...
For first, check this (from page #8.2): DriveWindow Light 2.93 User Guide