WIN LC on a microbox

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
ThermoNuclear
Posts: 41
Joined: Sat Mar 06, 2010 8:20 pm

WIN LC on a microbox

Post by ThermoNuclear » Wed Nov 21, 2012 4:50 pm

Hi All,

i'm trying to reinstall WINLC (WINAC 2010) on a $iemen$ microbox IPC427C.

I installed the licence for WinLC with EKB but it keeps comming back with "there is no licence for WINLC".

I read i a previuos post that installing the short keys for WINAC V4.0 V4.1 solves this problem , the only thing is

the "harddisk" in a microbox is a CF card and is not treated as a harddisk by EKB but as a floppy disk and you only can install the short keys on a hard disk.

Can anybody help please.

Regards

Thermo. (sos)

CoMod
Site Admin
Posts: 3969
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: WIN LC on a microbox

Post by CoMod » Wed Nov 21, 2012 5:38 pm

1. Simatic_EKB is for home_use only.
2. For transfer key use USB stick

ThermoNuclear
Posts: 41
Joined: Sat Mar 06, 2010 8:20 pm

Re: WIN LC on a microbox

Post by ThermoNuclear » Wed Nov 21, 2012 6:25 pm

Hi,


This is for home use, i bought this as scrap but the CF card was missing.

Just to experiment a bit with WinAC.

Greetings.

Thermo.

CoMod
Site Admin
Posts: 3969
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: WIN LC on a microbox

Post by CoMod » Wed Nov 21, 2012 6:28 pm

insert usb stick with long key and try again

Post Reply