[?]: danfoss cable for inverter

привода и частотники
Post Reply
hussein kamal
Posts: 39
Joined: Thu Jul 29, 2010 7:51 am

[?]: danfoss cable for inverter

Post by hussein kamal » Mon Feb 27, 2012 11:38 am

i need help to connect danfoss inverter to take backup program from it plz help me to how make cable

xooo
Posts: 1
Joined: Fri Feb 10, 2012 9:25 pm
Location: Poland

Re: [?]: danfoss cable for inverter

Post by xooo » Mon Feb 27, 2012 5:23 pm

MCT 10 Motion Control Tool Software and the cable from the printer. page 11:
http://danfoss.ipapercms.dk/Drives/DD/G ... tionDrive/

dekor
Posts: 114
Joined: Wed Jan 03, 2007 9:10 pm
Location: Europe

Re: [?]: danfoss cable for inverter

Post by dekor » Mon Feb 27, 2012 6:52 pm

Hi,
first you will need a converter RS232 to RS485 then you may access the inverter.
I found on a manual next explanations:
Using VLT Software Dialog
Connection to terminals
Sub D:
- PIN 3 GND
- PIN 8 P-RS 485
- PIN 9 N-RS 485
or
you may use terminals 68-70
Terminal 68 : RS485 P
Terminal 69 : RS485 N
Terminal 70 : GND

dekor

hussein kamal
Posts: 39
Joined: Thu Jul 29, 2010 7:51 am

Re: [?]: danfoss cable for inverter

Post by hussein kamal » Mon Feb 27, 2012 7:18 pm

thanks dekor for your help
(pgood) (pgood) (pgood) (clap) (clap) (clap)

Post Reply