SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
-
Rex2701
- Posts: 370
- Joined: Wed Oct 13, 2010 8:44 am
- Location: Russian Federation
Post
by Rex2701 » Sat Jan 28, 2012 12:33 am
Can somebody download this tool from
here?
http://support.automation.siemens.com/W ... n/19440762
Primary Setup Tool (PST) version 4.1 for Windows 7 (32/64 Bit) enables you to perform address allocations (e.g. IP address) for SIMATIC NET network components, Ethernet CPs and gateways.
The precondition is that these SIMATIC NET devices have a preset ETHERNET (MAC) address and are accessible on-line in the network.
Remark:
The address setting can also be done with STEP 7 (see STEP7 documentation). In the near future it will be possible to perform more address settings for SIMATIC NET Ethernet products via PST Tool and STEP 7.
-
Umencho
- Posts: 508
- Joined: Mon Jul 16, 2007 12:28 pm
- Location: Europe
Post
by Umencho » Sat Jan 28, 2012 5:52 am
Yes, link is correct. I can. What is the situation in your case?
-
Link
- Forum Community
- Posts: 1199
- Joined: Fri Oct 20, 2006 9:29 pm
- Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
-
Contact:
Post
by Link » Sat Jan 28, 2012 6:33 am
-
Rex2701
- Posts: 370
- Joined: Wed Oct 13, 2010 8:44 am
- Location: Russian Federation
Post
by Rex2701 » Sat Jan 28, 2012 6:45 pm
Link
Thank you very much.
Umencho
I'm working under Windows 7, so all previous PST versions didn't work.
-
czajot
- Posts: 2
- Joined: Tue Apr 19, 2016 12:42 pm
Post
by czajot » Sun May 01, 2016 2:59 pm
Hi
If someone could throw again active link to PST?
Thanks a lot
-
CoMod
- Site Admin
- Posts: 3976
- Joined: Thu Feb 16, 2006 3:25 pm
- Location: Russia
-
Contact:
Post
by CoMod » Sun May 01, 2016 5:12 pm
-
czajot
- Posts: 2
- Joined: Tue Apr 19, 2016 12:42 pm
Post
by czajot » Thu May 05, 2016 10:50 am
But This is not this (PRIMARY SETUP TOOL) program...
-
potato_hxh
- Posts: 3
- Joined: Tue Aug 09, 2016 6:03 am
Post
by potato_hxh » Tue Aug 09, 2016 6:24 am
Now, can use Proneta v2.2, this sofeware can define device ip & name, display topology and so on~~