AB RSLinx Software

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
Christine_1914
Posts: 19
Joined: Mon Aug 22, 2011 7:28 am
Location: Philippines

AB RSLinx Software

Post by Christine_1914 » Thu Sep 01, 2011 8:51 am

Hi, (sos)

I am currently working on an AB project.

I just want to know:

1.If there is any difference between RSLinx Classic Gateway CPR 9 SR1 and RSLinx Classic Gateway CPR 9 SR3.
2. Does it matters if I loaded RSLinx Classic Gateway CPR 9 SR3 to run RSView32 CPR 9 SR1?
3. Is there something that I still need to configure? (from the below case)

(There is an existing and running RSLinx on-site, but we just borrowed the license (RSLinx Classic Gateway CPR 9 SR1) from Rockwell.

We bought this new license RSLinx CPR 9 SR3 to replace the existing license.

I registered the license via internet at the office and transferred it on-site. I uninstalled the existing RSLinx and installed the new one (the one that we bought) togeteher with the registered license. But when I opened the RSView32 runtime, it is not stating on online mode. I tried to ping the SLC505 and look for it at the new installed RSLinx and it was there.

Note: I didn't create a back-up of the one I uninstalled.)

P.S. I encountered this service pack issue with Siemens' WinCC 7.0 SP1 and SP2. That's why I'm thinking if AB's service pack also matters and compatible to each other.

(fback)

LarsKBH
Posts: 23
Joined: Mon Jan 03, 2011 12:24 pm

Re: AB RSLinx Software

Post by LarsKBH » Thu Sep 01, 2011 1:06 pm

Hello !

The difference in versions should not give you any problems.
I think the latest version 2.57 also supporte Win7.

Have you confugured driver and IP adress for PLC in RSLinx ?
in menu->Communication->Configure drivers-> Add Ethernet->
In station mapping, write IP of PLC->Apply->Ok, and working :-)

Regards Lars

brave_eagle
Posts: 166
Joined: Thu Oct 20, 2005 12:24 pm
Location: China

Re: AB RSLinx Software

Post by brave_eagle » Thu Sep 01, 2011 2:57 pm

Thunder://QUFodHRwOi8vc3VwcG9ydC5yb2Nrd2VsbGF1dG9tYXRpb24uY29tL1dlYkZpbGVzL1VucHJvdGVjdGVkLzkzNTVXQUIxMDBFTkUvMi41OC4wMC9Db3JlLzIuNTguMDAtUlNMaW54TGl0ZS1BLURWRC56aXBaWg==


RSLinx 2.58

Pls download the "Thunder" download tools to download the link

Dr.Acrobat
Posts: 66
Joined: Sat Mar 10, 2007 8:11 am
Location: Spain

Re: AB RSLinx Software

Post by Dr.Acrobat » Thu Sep 01, 2011 3:47 pm

(sorry) Where is possibile found "Thunder" please.

Christine_1914
Posts: 19
Joined: Mon Aug 22, 2011 7:28 am
Location: Philippines

Re: AB RSLinx Software

Post by Christine_1914 » Fri Sep 02, 2011 1:04 am

LarsKBH wrote: Have you confugured driver and IP adress for PLC in RSLinx ?
in menu->Communication->Configure drivers-> Add Ethernet->
In station mapping, write IP of PLC->Apply->Ok, and working :-)
I already did this configuration but with no positive output for the RSView32 to go online. :(
brave_eagle wrote:
Thunder
Show
Thunder://QUFodHRwOi8vc3VwcG9ydC5yb2Nrd2VsbGF1dG9tYXRpb24uY29tL1dlYkZpbGVzL1VucHJvdGVjdGVkLzkzNTVXQUIxMDBFTkUvMi41OC4wMC9Db3JlLzIuNTguMDAtUlNMaW54TGl0ZS1BLURWRC56aXBaWg==

RSLinx 2.58

Pls download the "Thunder" download tools to download the link
May I know what is this for? I tried to open the link but my Firefox prompted a message "Firefox doesn't know how to open this address, because the protocol (thunder) isn't associated with any program."

brave_eagle
Posts: 166
Joined: Thu Oct 20, 2005 12:24 pm
Location: China

Re: AB RSLinx Software

Post by brave_eagle » Fri Sep 02, 2011 1:16 am


cuongvcs
Posts: 148
Joined: Fri May 23, 2008 4:00 pm
Location: Vietnam

Re: AB RSLinx Software

Post by cuongvcs » Sat Sep 03, 2011 10:07 am

(gpost) (gpost)
Thank you very much

soundview00
Posts: 52
Joined: Sun Jun 13, 2010 9:19 pm

Re: AB RSLinx Software

Post by soundview00 » Sun Sep 04, 2011 6:01 pm

Thanks.

mesta1
Posts: 4
Joined: Fri Oct 01, 2010 8:07 pm

Re: AB RSLinx Software

Post by mesta1 » Thu Sep 08, 2011 10:43 am

To go online with RsView you need to configure RSLinx enterprise, that it's included inside RSView and in your project too. You should also stop RsLinx Classic too from control panel.
RsLinx classic gateway is used as OPC server for other supervisors or to go online with RsLogix.

vuonganh
Posts: 31
Joined: Mon Sep 05, 2011 1:32 am

Re: AB RSLinx Software

Post by vuonganh » Thu Sep 22, 2011 6:32 pm


soundview00
Posts: 52
Joined: Sun Jun 13, 2010 9:19 pm

Re: AB RSLinx Software

Post by soundview00 » Thu Sep 22, 2011 6:44 pm

Is this the lite, professional, or enterprise edition?

LarsKBH
Posts: 23
Joined: Mon Jan 03, 2011 12:24 pm

Re: AB RSLinx Software

Post by LarsKBH » Thu Sep 22, 2011 6:53 pm

Without license it is Lite, with license it is Professional.

Enterprise is another software - Linx Enterprise

vuonganh
Posts: 31
Joined: Mon Sep 05, 2011 1:32 am

Re: AB RSLinx Software

Post by vuonganh » Fri Sep 23, 2011 2:31 am

it is RSLinx Gateway 2.58.00 with license (installation package of RSLinx Gateway 2.58.00 )
http://www.rockwellautomation.com/rockw ... efits.html

soundview00
Posts: 52
Joined: Sun Jun 13, 2010 9:19 pm

Re: AB RSLinx Software

Post by soundview00 » Fri Sep 23, 2011 5:32 am

Thanks for the info.

neuhauser
Posts: 70
Joined: Fri Oct 15, 2010 9:18 pm

Re: AB RSLinx Software

Post by neuhauser » Mon Sep 26, 2011 6:21 pm

I've seen similar problems in the past with linx if you don't backup the network before reinstalling. In linx classic even if you set up the drivers with the same names you will get unpredictable results going online until you re-setup the plc comm paths and save to the project.

Dr.Acrobat
Posts: 66
Joined: Sat Mar 10, 2007 8:11 am
Location: Spain

Re: AB RSLinx Software

Post by Dr.Acrobat » Thu Sep 29, 2011 1:42 am

vuonganh for megaupload needed premium account.
Could you upload just gateway license.
Thanks.

pftarazona
Posts: 2
Joined: Fri Aug 05, 2011 12:11 am
Location: Colombia
Contact:

Re: AB RSLinx Software

Post by pftarazona » Wed Feb 08, 2012 2:36 pm


Samiro
Posts: 1
Joined: Tue Nov 17, 2015 2:35 pm

Re: AB RSLinx Software

Post by Samiro » Tue Nov 17, 2015 4:52 pm

posting.php?mode=reply&f=12&t=16361#

Could someone please repost a link for RSLinx 2.58 or is there a way of cracking the activation of version 2.59?

Pleasehelp

Post Reply