[LINK]: PL7-2 Software

другие контроллеры
Post Reply
Applied666
Posts: 8
Joined: Wed Oct 08, 2008 9:50 pm
Location: New Zealand

[LINK]: PL7-2 Software

Post by Applied666 » Thu Apr 30, 2009 11:17 pm

Looking for a copy of the PL7-2 DOS software for programming a TSX17 PLC.

Thanks in advance

ngoc
Posts: 55
Joined: Sun Jan 08, 2006 11:59 am
Location: Vietnam

Post by ngoc » Fri May 01, 2009 12:12 am

Software of TSX 17 is: Xtel+ PL7-2 in OS/2 Warp V3.0 OS of IBM.

MareBlu
Posts: 85
Joined: Thu Oct 04, 2007 5:28 am
Location: Europe

Post by MareBlu » Fri May 01, 2009 9:36 am

Hi,Applied666.
In my archive I've found this old application for TXS17 under DOS.

pl72.zip



Passw.: onlyforplcnetru_:)_

But don't tellme something about it because I don't remember how it works. ( I've used it more than 15 years ago last time....)

ngoc
Posts: 55
Joined: Sun Jan 08, 2006 11:59 am
Location: Vietnam

Post by ngoc » Fri May 01, 2009 2:05 pm

Hopefully it can help for your job.
(I download from Internet, I don't test)
Link_is_Dead :(/O ... 2_Full.rar
:lol:

ahmadhaseeb
Posts: 10
Joined: Wed Apr 15, 2009 6:02 am
Location: Pakistan

Post by ahmadhaseeb » Tue May 26, 2009 5:20 am

The rapidshare link is not working someone upload the software

leofarhan
Posts: 122
Joined: Fri May 01, 2009 8:50 am

PL7-3 & ORPHEE Required

Post by leofarhan » Wed May 27, 2009 2:16 pm

If anyone have PL7-3 & ORPHEE with crack please upload.

I have APRIL Orphee dongle, but it is not working.

Thanks

Link
Forum Community
Forum Community
Posts: 1199
Joined: Fri Oct 20, 2006 9:29 pm
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Contact:

pl7-07

Post by Link » Wed Jun 17, 2009 9:25 am

This is PL7-07 v4
Work is only Win98, NT
Link_is_Dead :(/PL707_v4.rar
Good luck!

venix
Posts: 122
Joined: Fri Feb 29, 2008 4:17 pm
Location: Europe

Re: [LINK]: PL7-2 Software

Post by venix » Tue Oct 20, 2009 6:43 am

Thank you!

It worked for me with the TSXPCX1031 cable.

Best regards!
Venix

ebadi
Posts: 1
Joined: Tue Nov 03, 2009 8:31 am

Re: [LINK]: PL7-2 Software

Post by ebadi » Tue Sep 21, 2010 9:06 am

hi
The rapidshare link is not working someone upload the software.

thanks in advance

bestr egards

Lepes9
Posts: 17
Joined: Fri Sep 24, 2010 10:03 pm

Re: [LINK]: PL7-2 Software

Post by Lepes9 » Mon Nov 15, 2010 3:50 pm

Hi there,


I need also PL7-2 for DOS.
Does anybody has this software?
Can anybody upload/re-upload it? (The old links don't work any more.)



Greets
Lepes9

grnick50
Posts: 4
Joined: Tue Oct 26, 2010 8:42 pm

Re: [LINK]: PL7-2 Software

Post by grnick50 » Mon Nov 29, 2010 10:45 am

Dear All,

I am trying to find a piece of software that performs pl7-2 to pl7 conversions. This Scheneider Electric software is documented in document: w913293990301a_k01_000_02
As TSX17 is a legacy product cable & software are hard to find. If one has the native *.bin file form PL7-2 he can convert to PL7 and form there if needed to Unity Pro.

Does anyone have this software?

Regards!

valero
Posts: 7
Joined: Wed Jan 19, 2011 4:30 pm

Re: [LINK]: PL7-2 Software

Post by valero » Tue Jan 25, 2011 5:17 pm

Last edited by valero on Sun Feb 27, 2011 4:39 pm, edited 1 time in total.

Lepes9
Posts: 17
Joined: Fri Sep 24, 2010 10:03 pm

Re: [LINK]: PL7-2 Software

Post by Lepes9 » Wed Feb 02, 2011 9:18 am

Many thanks, valero!


Greetings
Lepes9

mutant
Posts: 8
Joined: Wed May 12, 2010 4:39 pm

Re: [LINK]: PL7-2 Software

Post by mutant » Sat May 04, 2013 10:19 pm

Can anybody upload these files again?

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [LINK]: PL7-2 Software

Post by vlad2006gr » Sat May 04, 2013 10:33 pm


mutant
Posts: 8
Joined: Wed May 12, 2010 4:39 pm

Re: [LINK]: PL7-2 Software

Post by mutant » Sun May 05, 2013 1:04 am

Thanks, vlad2006gr. But I did not understand, now I have to find Xtel v6 ? Or enough that you gave me?




Best regards!

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [LINK]: PL7-2 Software

Post by vlad2006gr » Sun May 05, 2013 5:15 pm


rapter
Posts: 83
Joined: Mon Feb 04, 2008 8:14 am

Re: [LINK]: PL7-2 Software

Post by rapter » Sun May 05, 2013 5:31 pm

TSX 17 pc to plc cable wiring please...

mutant
Posts: 8
Joined: Wed May 12, 2010 4:39 pm

Re: [LINK]: PL7-2 Software

Post by mutant » Sun May 05, 2013 6:53 pm

Thanks a lot! (pgood)

Best regards!

mutant
Posts: 8
Joined: Wed May 12, 2010 4:39 pm

Re: [LINK]: PL7-2 Software

Post by mutant » Mon May 06, 2013 6:31 pm

rapter wrote:TSX 17 pc to plc cable wiring please...
Maybe this link will help you Link_is_Dead :(/Cables_tsx.zip

Best regards!

JanRigo
Posts: 24
Joined: Thu Sep 23, 2010 9:24 am
Location: SK

Re: [LINK]: PL7-2 Software

Post by JanRigo » Mon Sep 09, 2013 12:27 pm

How to install PL7-2?? setup.exe writes: "This program cannot be run in a DOS session". I have win XP

MareBlu
Posts: 85
Joined: Thu Oct 04, 2007 5:28 am
Location: Europe

Re: [LINK]: PL7-2 Software

Post by MareBlu » Mon Sep 09, 2013 4:00 pm

You have to use old standalone msdos like msdos v5

frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: [LINK]: PL7-2 Software

Post by frederico_jpm » Wed Sep 25, 2013 10:12 am

Hi everyone.

Can someone share again PL7-2 software?
I need to program TSX Micro 17.

Thanks.

nazidade
Posts: 8
Joined: Thu Sep 05, 2013 12:59 am

Re: [LINK]: PL7-2 Software

Post by nazidade » Sun Sep 29, 2013 9:14 pm

Hi
if your win98 is installed, you can do a quick and simple installation PL72 =>
you must copy the file three (TE_BOOT, XDOSPRJ, XDOSSYS) link on the root C: \
then you call the pl7-2 by PL72 TE_BOOT shortcut in the folder.
link:
http://www.sendspace.com/file/40kstw

pit6
Posts: 2
Joined: Mon Dec 02, 2013 7:09 am

Re: [LINK]: PL7-2 Software

Post by pit6 » Fri Sep 12, 2014 6:25 am

Can someone share the programming sw for TSX17 and cable diagram?
I need to something change in program TSX Micro 17

Thanks

blito1991
Posts: 1
Joined: Wed May 13, 2015 9:35 am

Re: [LINK]: PL7-2 Software

Post by blito1991 » Wed May 13, 2015 9:46 am

Hello to everyone and sorry for reopen this post... I want to access to a Telemechanique TSX17 with PL7-2 software. Regrettably, I've found one link from rapidshare (recently closed). Can anyone send me another link where i could download it??

Thanks a lot!!! (tyou) (tyou)

oquintanilla
Posts: 1
Joined: Sat Oct 30, 2010 7:20 pm

Re: [LINK]: PL7-2 Software

Post by oquintanilla » Tue Nov 24, 2015 11:37 pm

The file name is not visible obvious reasons version is 5.1 PL7 2, 3 EXE Zip Files can you verify with zip program... If you Download Seed on other host file please
https://mega.nz/#!xZAgmDgA
Best Regards

sintespain
Posts: 1
Joined: Sat Sep 10, 2016 5:51 pm

Re: [LINK]: PL7-2 Software

Post by sintespain » Sat Sep 10, 2016 6:31 pm

Anybody have a copy of pl7-2 software?? I need it to do a backup copy.

I think the old links doesn't works

Thanks

alireza136110
Posts: 53
Joined: Wed Nov 26, 2008 8:01 am
Location: Iran

Re: [LINK]: PL7-2 Software

Post by alireza136110 » Mon Oct 03, 2016 1:29 pm

plz reupload.
thanks

Seneko
Posts: 1
Joined: Mon Oct 17, 2016 7:27 am

Re: [LINK]: PL7-2 Software

Post by Seneko » Mon Oct 17, 2016 7:32 am

Good day to all!!!

Please re-upload the software PL7-2 for DOS.

I have very old PLC TSX17 2 4012 and need to retrieve the program from eeprom.
I have installed the DOS 6.22 in VMware player but the version of the program I have seems wrong as during installation the errors occur.

Appreciate for any help,

darick
Posts: 2
Joined: Thu Apr 25, 2019 11:53 am

Re: [LINK]: PL7-2 Software

Post by darick » Fri May 03, 2019 7:29 am

Hello! Please share the program under Dos for tsx17 programming. All links do not work already (.

m_ghaff2000
Posts: 3
Joined: Mon Mar 16, 2020 7:00 am

Re: [LINK]: PL7-2 Software

Post by m_ghaff2000 » Mon Mar 16, 2020 4:37 pm

I need TSX17 software (TL 7 for DOS or WIN) immediately!!
The Rapidshare links do not work!!
Please help me !1
Manyy Thanks

aldan4uk78
Posts: 2
Joined: Wed Jul 13, 2016 5:15 pm

Re: [LINK]: PL7-2 Software

Post by aldan4uk78 » Thu Aug 06, 2020 3:59 am

Hi,
can anybody give a working link to PL2-7 software? Thanks.

Daniel_Brasil
Posts: 21
Joined: Thu Oct 28, 2010 11:29 pm
Location: Brasil

Re: [LINK]: PL7-2 Software

Post by Daniel_Brasil » Wed Aug 12, 2020 12:50 am

Hello,

Check link below.

https://www.mediafire.com/file/x57pzqs8h2jumgt/file

Password: plcforum


best regards

aldan4uk78
Posts: 2
Joined: Wed Jul 13, 2016 5:15 pm

Re: [LINK]: PL7-2 Software

Post by aldan4uk78 » Wed Aug 12, 2020 3:22 pm

Thanks!

val_pilats
Posts: 1
Joined: Tue Feb 28, 2017 8:40 pm

Re: [LINK]: PL7-2 Software

Post by val_pilats » Tue Dec 15, 2020 9:29 am

Reupload programming cable for TSX47-20 please.

itanyi
Posts: 2
Joined: Mon May 30, 2011 8:55 am

Re: [LINK]: PL7-2 Software

Post by itanyi » Wed Jan 27, 2021 9:04 am

HI!
The links are died... Please reupload PL7-2 - DOS.
Thank You in advance! ISTA

SanPedro_
Posts: 1
Joined: Fri Aug 27, 2021 5:24 pm

Re: [LINK]: PL7-2 Software

Post by SanPedro_ » Fri Aug 27, 2021 5:28 pm

Can anyone please reupload the PL7-2 for DOS software?
I really need it.
Thank you.

hmohamed
Posts: 147
Joined: Sun Oct 18, 2009 8:19 am

Re: [LINK]: PL7-2 Software

Post by hmohamed » Sun Nov 06, 2022 5:42 pm

valero wrote:
Tue Jan 25, 2011 5:17 pm
pl7 for DOS
Link_is_Dead :(/files/444484002/pl7-2.zip
XTEL fo DOS
Link_is_Dead :(/files/444484213/xtel.zip
Cable TSX
Link_is_Dead :(/files/444591011/22Ibmtotsx.pdf
Cable for TSX 47,67,87,107
http://www.niplex.com.au/OperatorPanels ... /ca103.zip
all links are dead can you reupload?

tiagours
Posts: 1
Joined: Thu Jul 17, 2014 2:35 pm

Re: [LINK]: PL7-2 Software

Post by tiagours » Thu Jul 13, 2023 5:09 pm

I need the Software to open the PL7-2 to open plc programs with model TSX1723428E. Can someone help me?

Post Reply