[Link]: Step5 V6.x software

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
segaauto
Posts: 34
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

[Link]: Step5 V6.x software

Post by segaauto » Tue Oct 12, 2010 6:15 am


Daniel_Brasil
Posts: 21
Joined: Thu Oct 28, 2010 11:29 pm
Location: Brasil

Re: Request: Step5 V6.x software

Post by Daniel_Brasil » Sun Oct 31, 2010 11:58 am

Hello segaauto,

The STEP5 V7.23 don´t work for you?


Bests regards,
Daniel

segaauto
Posts: 34
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

Re: Request: Step5 V6.x software

Post by segaauto » Mon Nov 08, 2010 11:54 pm

No it has to be a version lower tan 7.0

I need to run comm521 basic ver 1.2 and it only runs in Ver 6.X

Thanks.

segaauto

3Mendo
Posts: 5
Joined: Mon Oct 04, 2010 4:39 pm

Re: Request: Step5 V6.x software

Post by 3Mendo » Thu Nov 11, 2010 8:56 pm

Try this STEP_5_V6.5.zip, I just uploaded it.
[dead]
3.5 MB
Good luck... :mrgreen:

segaauto
Posts: 34
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

Re: Request: Step5 V6.x software

Post by segaauto » Sun Nov 14, 2010 4:40 am

Thank you 3Mendo Iinstalled and is running good.

Thanks a lot.

segaauto

3Mendo
Posts: 5
Joined: Mon Oct 04, 2010 4:39 pm

Re: Request: Step5 V6.x software

Post by 3Mendo » Sun Nov 14, 2010 12:40 pm

You're welcome!

Marcio26
Posts: 3
Joined: Mon Jul 26, 2010 4:24 pm

Re: [LINK]: Step5 V6.x software

Post by Marcio26 » Sat Oct 15, 2016 8:01 am

Can you upload it again please?

Shaktalv
Posts: 1
Joined: Fri Nov 11, 2016 8:41 am

Re: [Request]: Step5 V6.x software

Post by Shaktalv » Wed Nov 16, 2016 7:07 am

Please, I need too. Thanks

chai
Posts: 1
Joined: Sat Jun 06, 2020 3:40 am

Re: [Request]: Step5 V6.x software

Post by chai » Sat Jun 06, 2020 3:50 am

support win xp sp3 ????

Answers to FAQs
Faq & Info
Faq & Info
Posts: 173
Joined: Thu Oct 13, 2005 6:42 pm
Location: Frequently Asked Questions – Часто Задаваемые Вопросы

Re: [Request]: Step5 V6.x software

Post by Answers to FAQs » Sat Jun 06, 2020 1:21 pm

STEP5 V7.23 support WinXP sp3

roggab
Posts: 2
Joined: Thu Jun 25, 2020 9:56 am

Re: [Request]: Step5 V6.x software

Post by roggab » Sat Jul 04, 2020 9:06 pm

hmm im trying to resurect an -95 yers lathe that i bought have eprom ckecksum error on it bought a prommer turn out its a seriall prommer so it works with pgs and later versions of step5 6.x for pc
v7 then its not supported so have tried the versions i have found but havent found a real step 5 v6.6 or later
some versions i get to work but not with my seriall prommer
anyone have a working link for v6.6 ?

regards rogga

found out i could use ws800a to read eproms to found a link and installed it anyoing in the manual for ws800a my eprom is shown with a hole bunch of others but in program only a few and not mine :(:(

but im not sure manual and program indicates that i could read eprom from system sinumerik805 with tty cable
well ill se how long im lasting trying else its probably mesa cards/linuxcnc

rogga

Daniel_Brasil
Posts: 21
Joined: Thu Oct 28, 2010 11:29 pm
Location: Brasil

Re: [Request]: Step5 V6.x software

Post by Daniel_Brasil » Wed Aug 12, 2020 12:11 am

Hello,

I have v6.03, v6.5 and v6.65 that i download in this forum, ten years ago (include user "3Mendo" uploaded file).


http://www.mediafire.com/file/v3qh05rl7 ... 5.zip/file

Password: plcforum

good lucky

roggab
Posts: 2
Joined: Thu Jun 25, 2020 9:56 am

Re: [Request]: Step5 V6.x software

Post by roggab » Tue Sep 01, 2020 2:05 pm

thanks have those but im not able to get my prommer working with them had a guy at ssab that have a pg but he say also he cant read my eproms i think its strange what is needed then like in the case with ws800a manual shows my eprom but program does not do i have to make some editing to the eprom list (eprom.pte) or what do i need ??

spacedev
Posts: 22
Joined: Thu Jul 15, 2021 10:39 pm

Re: [Request]: Step5 V6.x software

Post by spacedev » Sun Jan 08, 2023 9:48 am

Could you upload one again Step5 v6.03 ?

thx

spacedev
Posts: 22
Joined: Thu Jul 15, 2021 10:39 pm

Re: [Request]: Step5 V6.x software

Post by spacedev » Tue Jan 24, 2023 1:23 pm

Who have older version STEP5 than v6.5 ?

please upload.

thx.

spacedev
Posts: 22
Joined: Thu Jul 15, 2021 10:39 pm

Re: [Request]: Step5 V6.x software

Post by spacedev » Mon Aug 21, 2023 3:57 am

Could someone upload Step5 v6.6? (I would like install in Windows 95)

Link
Forum Community
Forum Community
Posts: 1199
Joined: Fri Oct 20, 2006 9:29 pm
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Contact:

Re: [Request]: Step5 V6.x software

Post by Link » Mon Aug 21, 2023 4:16 am


roberto_battistella
Posts: 71
Joined: Wed Sep 01, 2010 10:20 am

Re: [Request]: Step5 V6.x software

Post by roberto_battistella » Mon Aug 21, 2023 4:42 am

password ?

Answers to FAQs
Faq & Info
Faq & Info
Posts: 173
Joined: Thu Oct 13, 2005 6:42 pm
Location: Frequently Asked Questions – Часто Задаваемые Вопросы

[Link]: Step5 V6.x software

Post by Answers to FAQs » Mon Aug 21, 2023 7:15 am

hey, passworded file was deleted (Password: plcforum),
but second it`s unprotected, from protected file
sorry

spacedev
Posts: 22
Joined: Thu Jul 15, 2021 10:39 pm

Re: [Link]: Step5 V6.x software

Post by spacedev » Mon Aug 21, 2023 8:58 am

This is upgrade. File name: "STEP5 for PC V6.65 Upgrade (MS-DOS)"

I can't install it under Windows 95

Could upload install files (NOT upgrade)?

Link
Forum Community
Forum Community
Posts: 1199
Joined: Fri Oct 20, 2006 9:29 pm
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Contact:

Re: [Link]: Step5 V6.x software

Post by Link » Wed Aug 23, 2023 6:47 am

see link again
putted back passworded file( pass: plcforum ) + added s5v6(not sure witch version it)

Post Reply