-
- Posts: 3
- Joined: Mon Oct 19, 2009 8:43 pm
-
- Posts: 3
- Joined: Mon Nov 02, 2009 11:48 am
Hello, am sorry for replying late.
I have some videos about the operation of krones machines, if they are going to help you. But i don't know how i can upload them. i use Dial Up internet and it is too slow. with regard to the maintenance and troubleshooting manuals, i think i don't have such ones and i doubt if such manuals exist at all.
but we can write mail to each other in case of any problem. I also work in an industry where the machines are all made by krones.
thanks any way.
I have some videos about the operation of krones machines, if they are going to help you. But i don't know how i can upload them. i use Dial Up internet and it is too slow. with regard to the maintenance and troubleshooting manuals, i think i don't have such ones and i doubt if such manuals exist at all.
but we can write mail to each other in case of any problem. I also work in an industry where the machines are all made by krones.
thanks any way.
-
- Posts: 8
- Joined: Mon May 17, 2010 4:19 pm
Hi there, i also work in an industry where the machines are all made by Krones and i need a software for kRONES panel. This panel it´s an old B&R PC 486 whith touch panel. The operating system is MS-DOS v5.0. The machine is KRONES PALMASTER PALETTIZER for water bottles packs. Someboy knows if the HMI software used for this is zenOn, and wich version ??????
Thank´s in advance.
Thank´s in advance.
-
- Posts: 4
- Joined: Tue Mar 09, 2010 11:48 pm
So, I managed to program the LCT3 panel
you need PDWin: viewtopic.php?f=9&t=11037
this program runs under win2k with no problems. Under XP and Win7 there is somethig wrong with java that I could not manage.
Also I have na old dos version, which works under WinXP but you need a .bin file for download to the LCT3.
you need PDWin: viewtopic.php?f=9&t=11037
this program runs under win2k with no problems. Under XP and Win7 there is somethig wrong with java that I could not manage.
Also I have na old dos version, which works under WinXP but you need a .bin file for download to the LCT3.
-
- Posts: 1
- Joined: Fri Oct 26, 2012 1:54 am
Hi, good day for all¡ .... I would like information about a machine KOSME (Krones give the technical support)
This machine is a labeler that uses steppers for rotate the plates, talking to the staff krones, told me that to change the movement of the plates to each change of bottle, i need a new program .... This I understand very well, but i want to do this and i do not know where to get the software¡ .... This software is called "camma", i know this because I saw it one day with a technician of krones.
Someone could help me please??? .... Or give any idea of where to search? ... this software, programming manual, etc
Thank you very much for all, and please excuse me for my bad english¡
This machine is a labeler that uses steppers for rotate the plates, talking to the staff krones, told me that to change the movement of the plates to each change of bottle, i need a new program .... This I understand very well, but i want to do this and i do not know where to get the software¡ .... This software is called "camma", i know this because I saw it one day with a technician of krones.
Someone could help me please??? .... Or give any idea of where to search? ... this software, programming manual, etc
Thank you very much for all, and please excuse me for my bad english¡
-
- Posts: 1
- Joined: Wed Feb 22, 2017 8:11 am
-
- Posts: 1
- Joined: Thu Feb 10, 2022 7:11 am
-
- Posts: 8
- Joined: Wed Nov 06, 2019 6:27 am
- Location:
Dear all,
I have a KRONES TG4001D4K3GP16D device. But I couldn't find any manuals for it on the Internet.
Is it related to Checkmat? Would the PDWin (WinXP) and LCT3 (DOS) software work with it?
If so, what kind of cable should I use to connect to the device? (it has a 25-pin female DSUB port with RS232/TTY label)
Also, is there a special method to switch the KRONES device into the Transfer mode (for upload or download)?
If someone has any experience with this or similar KRONES devices and PDWin/LCT3 software, please reply.
Any pieces of manual or connector pin-out would be very helpful... Or any kind of advice.
Many thanks in advance!
AK5fa
I have a KRONES TG4001D4K3GP16D device. But I couldn't find any manuals for it on the Internet.
Is it related to Checkmat? Would the PDWin (WinXP) and LCT3 (DOS) software work with it?
If so, what kind of cable should I use to connect to the device? (it has a 25-pin female DSUB port with RS232/TTY label)
Also, is there a special method to switch the KRONES device into the Transfer mode (for upload or download)?
If someone has any experience with this or similar KRONES devices and PDWin/LCT3 software, please reply.
Any pieces of manual or connector pin-out would be very helpful... Or any kind of advice.
Many thanks in advance!
AK5fa