[KEY]: iFix 3.5, iFix 4.0 software!

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
votuandktd
Posts: 58
Joined: Sun Aug 13, 2006 12:51 pm
Location: Vietnam

[KEY]: iFix 3.5, iFix 4.0 software!

Post by votuandktd » Wed Mar 14, 2007 7:51 am

I need iFix SCADA software, please give me the links to download.

Thank you,

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Fri Mar 16, 2007 7:01 pm

try this
ftp://ftp.indusoft.ru/GEFanuc_Products/
i dont know what is the language :?:
then use the lic in the net up to 2-10-2008
also exists full lic for 3.5
most
Last edited by most on Sun Mar 25, 2007 10:27 am, edited 1 time in total.

ngoc
Posts: 55
Joined: Sun Jan 08, 2006 11:59 am
Location: Vietnam

IFix4.0

Post by ngoc » Wed Mar 21, 2007 9:34 am

Hello most
Please, you can upload IFix4.0 in rapidshare.com
Thanks.

votuandktd
Posts: 58
Joined: Sun Aug 13, 2006 12:51 pm
Location: Vietnam

Thank you!

Post by votuandktd » Wed Mar 21, 2007 2:21 pm

most wrote:try this
ftp://ftp.indusoft.ru/GEFanuc_Products/
i dont know what is the language :?:
then use the lic in the net up to 2-10-2008
also exists full lic for 3.5
most

-----------------
I was download, but I don't have key!
Can you help me, please?

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Wed Mar 21, 2007 7:23 pm

3 files

1.i_fi_x4 it lasts up to 2008 (tested)
2. i_fi_x4 it lasts up to 2012 (not tested by me)
3.ifxx 3.5 (tested)
for 3.5 edit with notpad tke key.reg for your SO and put the file *.sys
in c:\windows\intellution for XP (for example) or c:\winnt\intellution for 2000
Last edited by most on Sun Mar 25, 2007 10:28 am, edited 2 times in total.

votuandktd
Posts: 58
Joined: Sun Aug 13, 2006 12:51 pm
Location: Vietnam

Post by votuandktd » Thu Mar 22, 2007 9:49 am

Thank you.
Good luck to you.

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Sat Mar 24, 2007 10:40 pm

edit your key.reg
(for XP)
-----------------------
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.iekey]
"license"="C:\\Windows\\Intellution\\slapi.dll"
@=""
"license_file"="C:\\windows\\intellution\\license.SYS"
"license_id"=dword:00000

-------------------------------------
put the file licence.sys in folder windows/inteletion

in the folder "windows/intellution" exist one file with name "iKeyUpdate" . run it
open the file licence.sys (open in all files) and ok. it appears an error. ok

run ifix et voila !
Last edited by most on Tue Mar 27, 2007 9:59 pm, edited 1 time in total.

monty_burns_007
Posts: 154
Joined: Sat Nov 19, 2005 10:20 am
Location: Europe

Post by monty_burns_007 » Tue Mar 27, 2007 3:20 pm

most wrote:edit your key.reg
(for XP)
....
Hi mostrengo....

i saw your messages on plc.net.ru about iFix.

Is there another file (license.sys) which epires on 2151 ?

normally a license.sys can't be inserted in the ikeyupdate tool.
An ikey file can be inserted in the ikeyupdatetool, but only if the ikey update file is for the same dongle serial number.

Btw. your 3 first files (Rar with 3 files) are software licenses. The ikeyupdate tool is for hardware hasp dongles.

Do you have a hasp dongle image of that last license (valid forever) for v.4.0 ? Or if not at least the file of your last post (software license license.sys)

Normailly i make dongle image form hasp4 dongle or emulated it with a dongle emulator or use a software license file like yours.

thx in advance,

monty

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Tue Mar 27, 2007 9:42 pm

olá monty, you recognized me of another forum !
I do not have license to year 2151
I do not have original hasp dongle or emulated.
After some attempts I got the license using the program "iKeyUpdate"
my programes 3.5 and 4 i download it by emule.
sorry I cannot help you.
best regardes

most_trengo

monty_burns_007
Posts: 154
Joined: Sat Nov 19, 2005 10:20 am
Location: Europe

Post by monty_burns_007 » Fri Mar 30, 2007 8:22 pm

most wrote:olá monty, you recognized me of another forum !
I do not have license to year 2151
I do not have original hasp dongle or emulated.
After some attempts I got the license using the program "iKeyUpdate"
my programes 3.5 and 4 i download it by emule.
sorry I cannot help you.
best regardes

most_trengo
hey most,

indeed another good forum :wink:

i previously saw in one or two replys above a message of you with 2 screens attached in in one screen (think the last) the license was until 21xx somewhere. (with other words a permanent license)

So you used the license.sys file with the ikeyupdate tool ?
Which license.sys file may i ask ? Is that file also located in your 3.5/4 file download ? Normally you can't use that license.sys in the update tool.
The license.sys is the soft license which can be installed with the .reg file.

Anyway there a new version 4.5 comming :lol:
with multi monitor support etc.....

greets,

monty 8)

PLC_ITA
Posts: 263
Joined: Sat May 27, 2006 6:46 am
Location: Europe

Post by PLC_ITA » Sat Mar 31, 2007 4:21 am

Hi friends,
..."another good forum" ... ?

Is possible to know the address ?

thanks

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Sat Mar 31, 2007 1:34 pm

PLC_ITA wrote:Hi friends,
..."another good forum" ... ?

Is possible to know the address ?

thanks
the other forum has little PLC (almost nothing), is dedicated to EDA... 8)
http://www.edaboard.com/
this http://plc.net.ru/ is the greater for PLC :D
most

votuandktd
Posts: 58
Joined: Sun Aug 13, 2006 12:51 pm
Location: Vietnam

Post by votuandktd » Tue Apr 03, 2007 2:04 am

Hi monty_burns_007,

Can you send me dump file of iFix 4.0 dongle?
Thank you very much,

tuangp
Posts: 125
Joined: Wed Apr 11, 2007 7:53 am

Post by tuangp » Wed Apr 11, 2007 7:57 am

most wrote:try this
ftp://ftp.indusoft.ru/GEFanuc_Products/
i dont know what is the language :?:
then use the lic in the net up to 2-10-2008
also exists full lic for 3.5
most
Thank "most" for link. But I need password for IEC.zip in "ftp://ftp.indusoft.ru/GEFanuc_Products/ ... /Matrikon/". Would you send me?
Thank.

PLCUSER
Posts: 3
Joined: Fri Apr 13, 2007 9:46 am
Location: Netherlands

License.sys

Post by PLCUSER » Fri Apr 13, 2007 9:51 am

Where can I get myself a nice License.sys file to full activate Ifix4.0??

All links appear to be dead.

dibolo
Posts: 74
Joined: Fri Mar 03, 2006 10:18 am
Location: Europe

Re: License.sys

Post by dibolo » Mon Apr 16, 2007 10:17 pm

PLCUSER wrote:Where can I get myself a nice License.sys file to full activate Ifix4.0??

All links appear to be dead.

Link_is_Dead :(/ifix4.rar

rar pass: dibolo

alphasxb
Posts: 3
Joined: Fri Apr 20, 2007 4:37 am
Location: china xi'an

can't use other plc except GE plc

Post by alphasxb » Sat Apr 21, 2007 3:22 pm

Proficy - KeyDiag: Version 4.0.5
-----------------
Customer Name : 228274:GE Fanuc Auto
Warranty Number : Z‡пBс»&V
Expiration Date : Saturday, August 18, 2007 < -- ?????????


this key can active ifix4

but you can not use other pcl except GE plc

some function has been forbidden!

erfan_messi
Posts: 2
Joined: Wed Aug 04, 2021 4:32 pm

Re: [KEY]: iFix 3.5, iFix 4.0 software!

Post by erfan_messi » Fri Aug 06, 2021 7:12 pm

Hi, I want the download link for ifix 3.5.
Does anyone have it?
Please send me.

Post Reply