Eplan P8 2.8/2.9 + personal keygen

обсуждение прочих программных продуктов:
Тools, Elcad, Eplan, ...
Post Reply
conrades
Posts: 7
Joined: Thu Jan 08, 2009 10:12 pm
Location: Europe

Eplan P8 2.8/2.9 + personal keygen

Post by conrades » Mon Jan 07, 2019 1:56 pm

========== 2021 personal keygen ===== Prefered to use Private Message with your generated "hardware id" to Chaos363 (pm) =======
viewtopic.php?f=7&t=26688&p=93208#p93208
chaos363 wrote:Let's just test it out. I would provide an application with which you can determine your hardware id.
Example wrote:HW-ID:
*1SVQATZ3LEB3BNH2004,*1RSRCC9GHYUELA4001C,*1EXXEWU8HZ9GFKA2018
Tell me this and you will receive the license and patch. (pm) Prefered to use Private Message
The keygen is released later with which the license can be created flexibly.

I couldn't test any other products but activation could open the entire licensing system.
So far, the activation has worked on three different systems.

Unfortunately, the license only works for one user so far.
The license cannot be used via a remote desktop and not in a VM.
A solution for this should only be a question of time.

Product: EPLAN Electric P8 2.9 / EPLAN Electric P8 2.9 SP1
Application: https://anonymousfiles.io/ffwxs7wQ/
EPLSG wrote:
Thu Jan 21, 2021 3:07 pm
I think that:You are the magician. It would be great a report for installation. I want to ask you: Eplan normally have an online activation,inserting EID directly whwn open P8 for the first time. Is patched too?
With full patch that I hope arriving soon is possible works with Eplan with internet connected or not?

=========== Need edit C:\Windows\System32\drivers\etc\hosts file ===========================
The following steps must be carried out to install the activation.
This information is also contained in the Readme.txt, which is available in download file.

Code: Select all

1. Open C:\Windows\System32\drivers\etc\hosts
	-> insert the following lines
		0.0.0.0 eplan.prod.sentinelcloud.com
		0.0.0.0 licensingservice.epulse.cloud
2. Copy Crack\vcruntime140.dll into install dir 
	-> C:\Program Files\EPLAN\Platform\2.9.3\Bin
3. Copy License\lservrc into lic dir
	-> C:\Users\Public\EPLAN\Common
4. Run EPlan
In the end, the online activation only downloads the license that I have made available to you and pushes it into the following folder.
When the application starts, it is checked whether this file is there.
If not, the popup for entering the license appears.
The license itself is an exact replica of the original, where only the PKCS#1 check is not valid. This is what vcruntime140.dll is for.
C:\Users\Public\EPLAN\Common

The change in the hosts file means that EPLAN can no longer correctly resolve the dns addresses for licensing and thus cannot make calls home.
Of course, the possible addresses could be expanded by updates from the manufacturer.

The activation that I have sent is in a final state.
There could only be problems with an incorrect calculation of the hardware id.
Now the possible users must be adjusted or network licenses generated.

At the moment I don't think that the manufacturer expects this activation, which is why everything should work.
Last edited by conrades on Tue Feb 02, 2021 11:41 am, edited 1 time in total.

oleksandr_ua
Posts: 104
Joined: Thu Jan 01, 2015 9:02 am

Re: Eplan P8 NEW VERSION 2.8

Post by oleksandr_ua » Tue Jan 08, 2019 10:37 am

during extracting from archive
message appears
CRC failed ...Eplan Platform 2.8 (x64).msi
Spoiler
Show
Image
during installations Eplan
message appears
The installation is not complete
Spoiler
Show
Image
The archive is not a complete
program is not installed
no license
(not_allow)

GenderGeek
Posts: 9
Joined: Tue Nov 03, 2015 11:09 am

Re: Eplan P8 NEW VERSION 2.8

Post by GenderGeek » Tue Jan 08, 2019 11:50 am

Luca wrote:Version 2.8 is out and they are switching to "state-of-the-art technology in the licensing management" with online activation. The "virtual" dongle concept will not work. I hope there will be a solution but I'm kinda skeptical at the moment :cry:

GenderGeek
Posts: 9
Joined: Tue Nov 03, 2015 11:09 am

Re: Eplan P8 NEW VERSION 2.8

Post by GenderGeek » Tue Jan 08, 2019 12:07 pm

mirror - https://cloud.mail.ru/public/BSqb/DacHkfFPU
EPLAN_Electric_P8_2.8.zip
1.18 ГБ
MD5 - 295F878E34725C6CC29F8F26E8F1D64A

oleksandr_ua
Posts: 104
Joined: Thu Jan 01, 2015 9:02 am

Re: Eplan P8 NEW VERSION 2.8

Post by oleksandr_ua » Tue Jan 08, 2019 12:50 pm

yes this archive is healthy (suc)
installation correctly, no erros, it remains to find a license (oo)

I hope soon the license is working (medicine license ) ....

but unfortunately today, without a license, Eplan 2.8 - useless toy....

Thank God version 2.7 has a cure/license (tyou)

chakotay
Posts: 17
Joined: Tue Jun 17, 2008 5:29 am
Location: Ganymed

Re: Eplan P8 NEW VERSION 2.8

Post by chakotay » Tue Oct 08, 2019 5:36 am

License Hack (chinese):
https://www.jb51.net/softs/652424.html

Image

Can someone verify?

Cheers,
Chakotay

cuervo2k
Posts: 42
Joined: Wed Oct 24, 2007 1:58 pm

Re: Eplan P8 NEW VERSION 2.8

Post by cuervo2k » Wed Oct 09, 2019 8:26 am

sorry friend but it doesn't work with version Electric P8 2.8.3.12535

h4rdw4re
Posts: 85
Joined: Mon Feb 25, 2008 8:40 am
Location: Europe

Re: Eplan P8 NEW VERSION 2.8

Post by h4rdw4re » Thu Oct 10, 2019 12:11 am

How did you try this method when there is trojan in downloaded file?
Can you post link to what you have download?

Luca
Posts: 41
Joined: Thu Mar 24, 2011 1:29 pm

Re: Eplan P8 NEW VERSION 2.8

Post by Luca » Mon Oct 14, 2019 2:42 pm

This looks promising. I'll have to find a PC and time to try it out.

GenderGeek
Posts: 9
Joined: Tue Nov 03, 2015 11:09 am

Re: Eplan P8 NEW VERSION 2.8

Post by GenderGeek » Mon Oct 21, 2019 7:10 am

chakotay wrote:
Tue Oct 08, 2019 5:36 am
License Hack (chinese):
https://www.jb51.net/softs/652424.html

Image

Can someone verify?

Cheers,
Chakotay
Only in the pictures showing the official activation method

sadefa
Posts: 83
Joined: Tue Nov 10, 2009 9:30 am
Location: Europe

[LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by sadefa » Mon Apr 20, 2020 10:36 am

Hello 2 all

today I have the new EPLAN v2.9 to share

Enjoy ;)

med is usually available at http://eplan-eb2.ys168.com

EPLAN ELECTRIC P8 2.9
DESCRIPTION
Show
EPLAN Electric P8 offers unlimited possibilities for project planning, documentation, and management of automation projects.With your choice of graphical or object orientation as well as refined platform technology, this high-end system is breaking new ground in electrical engineering. Its unique functional scope and direct connection to fluid and EMSR technology makes interdisciplinary work a reality.

Data from earlier planning phases can simply be imported using interfaces like ODBC, XML, or Excel – for consistency and perfect integration.

In other words: To shape your future, use EPLAN Electric P8.

EPLAN platform strategy: The modular platform provides core functions that are required in electro-CAE as well as in fluid or instrumentation & control engineering. The advantage of this is consistent data management and uniform processing in all disciplines.
links turbobit
Show
EPLAN P8 PRO PANEL 2.9
DESCRIPTION
Show
EPLAN Pro Panel Professional: Virtual enclosure layout in 3D

EPLAN Pro Panel Professional convinces through its deep degree of integration in the EPLAN platform and utilizes its manifold basic techniques such as the EPLAN device concept, the macro and options technology, access to the EPLAN Data Portal, etc. The design approach is individual: Optionally on the basis of a schematic or directly as layout of the enclosure in 3D. The devices provided for the mounting layout are displayed well-structured in Navigators or lists. During placing the system checks whether the positioning is carried out on the correct mounting panel.

The innovative eTouch technology allows components to be comfortably aligned and positioned exactly. Installation regulations and minimum spacing to manufacturer specification are taken into account as are the correct positioning of devices, wire ducts and mounting rails, including collision checks. The overview of all the designed devices and components allows the items to be checked simply on the basis of the parts data. Reports and bills of materials contain precise information also about items that vary in length such as wire ducts or mounting rails. Exact specifications therefore for manufacturing and mounting. Changes in the schematic or mounting layout are included in the entire project. The system informs interdisciplinarily and updates the associated drawings, bills of materials and legends automatically if desired. Thus ensuring uniform and consistent data that are always up to date.

Complete consistency
The software makes professional 3D layout planning easy even for the occasional user. Production relevant NC data for holes or cutouts is taken account in the 3D model and can be further processed. In addition to associative mounting diagrams special drilling templates for manufacturing can, for example, also be created. Modifications to housings, doors or mounting panels are transferred directly to the NC production systems via an NC interface. The deep manufacturing integration is also continued in the virtual wiring of the enclosure. The results of the length-optimized virtual wiring and cabling can in turn be used to optimize the schematic. The new quality in enclosure engineering covers all the phases of product development. The realistic 3D representation ensures high-quality data for manufacturing, mounting and operation. It facilitates the consistent creation, provision and maintenance of the documentation and accelerates the product engineering process persistently.

Manifold possibilities
EPLAN Pro Panel Professional provides manifold possibilities for the field of integrative enclosure planning, pre-assembly and production.
Added value at a glance
Benefit from numerous advantages for the virtual enclosure layout in 3D.
Modularization – the tailored fit for your system solution
Adapt EPLAN Pro Panel Professional perfectly to your workflows in engineering, technical preparations, manufacturing and mounting.
Get an insight into EPLAN Pro Panel
EPLAN Pro Panel Professional works with all standard Windows operating systems.
links turbobit
Show
EPLAN P8 FLUID 2.9
DESCRIPTION
Show
EPLAN Fluid supports fluid engineering with automated documentation. Simple handling, numerous test functions, and standard support make your design efficient – from now on the system assumes time-consuming standard tasks.

Compared with conventional, mostly CAD-based systems EPLAN Fluid comes with unique logic functions and automatisms that accelerate your fluid planning. The modern user interface with extensive drawing functions helps you familiarize yourself with its full potential – of course with the complete data stock from the predecessor system fluidPLAN. The autoconnect function applies to all connections that can be provided and analyzed with logical properties. This means you have an overview of all components, including the small parts like connectors, hoses, and pipes – and therefore a firm grip on the costs!

The new Engineering platform is your key to the future, providing core functions for fluid, electrical, measuring, and control engineering as well as CAE for electrica systems. Based on a unified platform all systems are suppliedfrom the same database. From now on multiple data entries and inconsistencies are history.

Besides a unified database the platform also includes basic functions like thegraphical editor (for circuit diagrams, fluid plans, process control group plans), a unified rights management, the viewer, online/offline foreign language transla-tions, and the comprehensive audit system. The unique framework concept deliversimpressively fast results – not least of all owing to the unified look & feel throughout all applications.
links turbobit
Show
Last edited by sadefa on Mon Apr 20, 2020 8:39 pm, edited 1 time in total.

AndyLey
Posts: 2
Joined: Mon Apr 20, 2020 6:51 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9

Post by AndyLey » Mon Apr 20, 2020 6:53 pm

Is there a cure in the kit?
Please post it on some other file hosting service. It’s very difficult to download from a turbobit. :-(

AndyLey
Posts: 2
Joined: Mon Apr 20, 2020 6:51 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by AndyLey » Mon Apr 20, 2020 8:56 pm

"med is usually available at http://eplan-eb2.ys168.com"

There is no cure. :-(

Rick_freitas1
Posts: 1
Joined: Thu Apr 23, 2020 6:50 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by Rick_freitas1 » Thu Apr 23, 2020 7:21 pm

Good afternoon!
I need Macros from Eplan P8, from Schmenrsal in EDZ.

djcatalyst
Posts: 90
Joined: Sat Feb 21, 2009 3:42 pm
Location: Israel

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by djcatalyst » Mon May 18, 2020 2:34 pm

sadefa,
"med is usually available at http://eplan-eb2.ys168.com"
but is no longer there, even the link is died long time ago, pleae check before sharing, THERE IS NO EXISTING PATCH FOR VERSION 2.8 - 2.9 IN THE NETWORK as far as I know,
PPL ARE LOOKING FOR THIESE VERSIONS FOR LONG TIME
PLEASE SHARE USEFUL INFORMATION, YOUR SHARE WITHOUT A PATCH SAME AS SPAM

Thank you

mayers21
Posts: 9
Joined: Fri Apr 25, 2014 7:37 am

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by mayers21 » Tue May 26, 2020 12:56 pm

Does someone have new links from another hoster?

Also some medicine? As the link here is not working

MortezaB5
Posts: 2
Joined: Sat Apr 21, 2018 3:29 am

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by MortezaB5 » Sat Jun 20, 2020 5:38 pm

sadefa wrote:
Mon Apr 20, 2020 10:36 am
today I have the new EPLAN v2.9 to share
............
ican get in can you help me?

turo1991
Posts: 9
Joined: Tue Jun 06, 2017 9:32 am

Re: Eplan P8 NEW VERSION 2.8

Post by turo1991 » Tue Nov 03, 2020 8:43 am

Hello, any good news maybe? :(

colban87
Posts: 1
Joined: Thu May 12, 2011 7:05 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by colban87 » Wed Nov 04, 2020 5:47 am

hi,

can you share new updated link and crack?

mor1987
Posts: 1
Joined: Sat Nov 28, 2020 8:06 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by mor1987 » Sat Nov 28, 2020 8:10 pm

hi. the links doesn't work correctly. i need this software. :(

morrisey
Posts: 20
Joined: Sat Mar 27, 2010 9:24 am

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by morrisey » Fri Dec 04, 2020 1:01 am

File link is dead. Please re-upload...

ikom81
Posts: 1
Joined: Tue Dec 08, 2020 6:06 am

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by ikom81 » Mon Dec 14, 2020 2:34 pm

How I can install second Eplan on the same computer.
I have install 2.9 and want to install 2.7 on the same computer. Because from 2.9 I can't Save the project to lower version.

turo1991
Posts: 9
Joined: Tue Jun 06, 2017 9:32 am

Re: Eplan P8 NEW VERSION 2.8

Post by turo1991 » Wed Dec 16, 2020 8:36 am

Almost end of the year, sooo.. someone, some information? :)) please ;d

gruendolf
Posts: 6
Joined: Sat Mar 21, 2009 12:35 pm
Location: Europe

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by gruendolf » Sat Dec 19, 2020 10:33 am

ikom81 wrote:
Mon Dec 14, 2020 2:34 pm
How I can install second Eplan on the same computer.
I have install 2.9 and want to install 2.7 on the same computer. Because from 2.9 I can't Save the project to lower version.
Save the project as a "macro project" and try to open in 2.7.

chaos363
Posts: 49
Joined: Tue Apr 08, 2014 12:47 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by chaos363 » Tue Dec 22, 2020 12:06 am

Can someone please re-upload eplan p8 2.9. i don't want to keep hope too high but i could build a working crack.

I currently built a license server with which you can use online activation to generate a valid license.

The whole thing was tested with eplan education 2.9, but a lot of modules and functions are missing.

popi
Posts: 14
Joined: Fri Aug 27, 2010 1:49 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by popi » Wed Dec 23, 2020 2:13 pm

Hi there is a link Electric P8 2.9.3.14179 without crack
https://fastshare.cz/15108975/p8-2.9.3.14179.zip

EPLSG
Posts: 18
Joined: Wed Jan 09, 2019 12:38 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by EPLSG » Wed Dec 23, 2020 3:29 pm

Would be great.
I cheer for you. :D :D

williamjj
Posts: 10
Joined: Thu Oct 18, 2018 5:59 am

Re: Eplan P8 NEW VERSION 2.8

Post by williamjj » Sun Dec 27, 2020 8:39 am

I can generate a license for EPLAN P8 V2.9 . It is enough for me to have a sample of the real EPLAN license file to produce a new license with it. Does anyone have a real license?

turo1991
Posts: 9
Joined: Tue Jun 06, 2017 9:32 am

Re: Eplan P8 NEW VERSION 2.8

Post by turo1991 » Sat Jan 02, 2021 11:21 pm

how you can generate license eplan? You have full version with it? or "student" license :/

chaos363
Posts: 49
Joined: Tue Apr 08, 2014 12:47 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by chaos363 » Fri Jan 15, 2021 11:34 am

Nothing is impossible ;P! (suc)

https://u.teknik.io/EFlM3.png
https://u.teknik.io/Xchjf.png
https://u.teknik.io/fAK0t.png

I still need time to implement the system check calculation. Currently only the license and an adapted library are required.

EPLSG
Posts: 18
Joined: Wed Jan 09, 2019 12:38 pm

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by EPLSG » Fri Jan 15, 2021 12:14 pm

Great Job.
It would be great. In which parts of the world are you?
If you need any support or something else,please text me.
Currently I work with 2.7 version but I could have a Key,an EID and a dump for an official key.
Keep in Touch.

williamjj
Posts: 10
Joined: Thu Oct 18, 2018 5:59 am

Re: Eplan P8 NEW VERSION 2.8

Post by williamjj » Fri Jan 15, 2021 1:17 pm

yes, i can generate full and unlimited license.

zart
Posts: 47
Joined: Sun Sep 06, 2009 4:51 pm
Location: Europe

Re: Eplan P8 NEW VERSION 2.8

Post by zart » Mon Jan 18, 2021 7:05 am

(read)

Vasiliy
Posts: 10
Joined: Fri Apr 06, 2018 11:10 am

Re: [LINK]: EPLAN Electric P8 v2.9 & EPLAN P8 PRO PANEL 2.9 & EPLAN P8 FLUID 2.9

Post by Vasiliy » Mon Jan 18, 2021 3:09 pm

Hello!

I support you in your endeavor !! EPLAN Education has only build 14228, but 14773 with PrePlanning is really needed. Good luck, friend!

chaos363
Posts: 49
Joined: Tue Apr 08, 2014 12:47 pm

Re: Eplan P8 NEW VERSION 2.8

Post by chaos363 » Tue Jan 19, 2021 11:08 pm

Let's just test it out.
I would provide an application with which you can determine your hardware id.
Tell me this and you will receive the license and patch.
The keygen is released later with which the license can be created flexibly.

I couldn't test any other products but activation could open the entire licensing system.
So far, the activation has worked on three different systems.

Unfortunately, the license only works for one user so far.
The license cannot be used via a remote desktop and not in a VM.
A solution for this should only be a question of time.

Product: EPLAN Electric P8 2.9 / EPLAN Electric P8 2.9 SP1
Application: https://anonymousfiles.io/ffwxs7wQ/

chakotay
Posts: 17
Joined: Tue Jun 17, 2008 5:29 am
Location: Ganymed

Re: Eplan P8 NEW VERSION 2.8

Post by chakotay » Wed Jan 20, 2021 6:37 am

http://www.eplanp8.com/6020.html

Eplan 2.9 SP1 HarmonyPatch. Can someone download with Baidu?
https://pan.baidu.com/s/1Skg_j7qLTMQwITn9bhRl1A
Password: 9SP1

Image

can someone upload this somewhere?
That would be very nice.

Many greetings, stay healthy.
Chakotay :D

Vasiliy
Posts: 10
Joined: Fri Apr 06, 2018 11:10 am

Re: Eplan P8 NEW VERSION 2.8

Post by Vasiliy » Wed Jan 20, 2021 8:03 am

I downloaded the newer "EPLAN_License_Client_2.9_SP1_9.1.17.24800" from the same place.

https://anonymousfiles.io/JAtKSPt8/

Vasiliy
Posts: 10
Joined: Fri Apr 06, 2018 11:10 am

Re: Eplan P8 NEW VERSION 2.8

Post by Vasiliy » Wed Jan 20, 2021 8:22 am

It looks like it's just an updated "License Client" that is installed in EPLAN Education 2.9

Vasiliy
Posts: 10
Joined: Fri Apr 06, 2018 11:10 am

Re: Eplan P8 NEW VERSION 2.8

Post by Vasiliy » Wed Jan 20, 2021 8:26 am

Hello!

I downloaded the application and defined my hardware id:
* 1QNEPJ6SBWQK5EB2004, * 1JR3EUEVSGDY2KD001C, * 12AMXQLZB4P5BAL2018

chakotay
Posts: 17
Joined: Tue Jun 17, 2008 5:29 am
Location: Ganymed

Re: Eplan P8 NEW VERSION 2.8

Post by chakotay » Wed Jan 20, 2021 8:46 am

*1ELRR2UDNSCX8MC2004,*1C7PU7U5AR4MWHJ001C,*16GB6A2QUP9ZLJ62018

Vasiliy
Posts: 10
Joined: Fri Apr 06, 2018 11:10 am

Re: Eplan P8 NEW VERSION 2.8

Post by Vasiliy » Wed Jan 20, 2021 10:00 am


popi
Posts: 14
Joined: Fri Aug 27, 2010 1:49 pm

Re: Eplan P8 NEW VERSION 2.8

Post by popi » Wed Jan 20, 2021 12:09 pm

Hi. Here is the link for latest version Eplan P8 2.9 SP1 with Update 4
https://fastshare.cz/15529328/eplan-p8- ... pdate4.zip

chaos363
Posts: 49
Joined: Tue Apr 08, 2014 12:47 pm

Re: Eplan P8 NEW VERSION 2.8

Post by chaos363 » Wed Jan 20, 2021 6:12 pm

Vasiliy wrote:
Wed Jan 20, 2021 8:26 am
Hello!

I downloaded the application and defined my hardware id:
* 1QNEPJ6SBWQK5EB2004, * 1JR3EUEVSGDY2KD001C, * 12AMXQLZB4P5BAL2018
https://anonymousfiles.io/TalAqSff/

chaos363
Posts: 49
Joined: Tue Apr 08, 2014 12:47 pm

Re: Eplan P8 NEW VERSION 2.8

Post by chaos363 » Wed Jan 20, 2021 6:15 pm

chakotay wrote:
Wed Jan 20, 2021 8:46 am
*1ELRR2UDNSCX8MC2004,*1C7PU7U5AR4MWHJ001C,*16GB6A2QUP9ZLJ62018
https://anonymousfiles.io/XpEsth4v/

liu_sg780912
Posts: 2
Joined: Wed Jan 20, 2021 1:11 am

Re: Eplan P8 NEW VERSION 2.8

Post by liu_sg780912 » Thu Jan 21, 2021 12:02 am

*1HSMRKF4QEZPPNG2004,*1HHE8C7YHBFJSMV001C,*1F35GPETU2QKSDZ2018

Vasiliy
Posts: 10
Joined: Fri Apr 06, 2018 11:10 am

Re: Eplan P8 NEW VERSION 2.8

Post by Vasiliy » Thu Jan 21, 2021 5:50 am

I did everything as written in ReadMe. When Eplan was launched, there was a choice of licenses. I chose Professional. But upon further launch, Eplan crashed. I tried to run it several times, rebooted Windows. Then I found out that when I generated the "id hardware" and copied it from the [url] https://anonymousfiles.io/50zb3qty/ [/ url] window, I saw extra spaces after the "*" (* 1QNEPJ6SBWQK5EB2004, * 1JR3EUEVSGDY2KD001Z, * 1JR3EUEVSGDY2KD001Z ). Maybe this is the problem? I watch the following messages, all send without spaces:
*1ELRR2UDNSCX8MC2004,*1C7PU7U5AR4MWHJ001C,*16GB6A2QUP9ZLJ62018
*1HSMRKF4QEZPPNG2004,*1HHE8C7YHBFJSMV001C,*1F35GPETU2QKSDZ2018

chaos363
Posts: 49
Joined: Tue Apr 08, 2014 12:47 pm

Re: Eplan P8 NEW VERSION 2.8

Post by chaos363 » Thu Jan 21, 2021 7:28 am

liu_sg780912 wrote:
Thu Jan 21, 2021 12:02 am
*1HSMRKF4QEZPPNG2004,*1HHE8C7YHBFJSMV001C,*1F35GPETU2QKSDZ2018
https://anonymousfiles.io/EPoM7pEW/

chaos363
Posts: 49
Joined: Tue Apr 08, 2014 12:47 pm

Re: Eplan P8 NEW VERSION 2.8

Post by chaos363 » Thu Jan 21, 2021 7:46 am

Vasiliy wrote:
Thu Jan 21, 2021 5:50 am
I did everything as written in ReadMe. When Eplan was launched, there was a choice of licenses. I chose Professional. But upon further launch, Eplan crashed. I tried to run it several times, rebooted Windows. Then I found out that when I generated the "id hardware" and copied it from the [url] https://anonymousfiles.io/50zb3qty/ [/ url] window, I saw extra spaces after the "*" (* 1QNEPJ6SBWQK5EB2004, * 1JR3EUEVSGDY2KD001Z, * 1JR3EUEVSGDY2KD001Z ). Maybe this is the problem? I watch the following messages, all send without spaces:
*1ELRR2UDNSCX8MC2004,*1C7PU7U5AR4MWHJ001C,*16GB6A2QUP9ZLJ62018
*1HSMRKF4QEZPPNG2004,*1HHE8C7YHBFJSMV001C,*1F35GPETU2QKSDZ2018
I noticed the spaces and removed them.
Since you come to the selection window for the license, your hardware id must be correct.
Otherwise a message would appear that the license is not for your computer.

I once had the problem described with myself. Internally, he cannot start the license system, which is why he aborts when it starts.
I cannot say what the exact cause is, but at the time I had installed EPLAN Education 2.9 and EPLAN Electric P8 2.9 at the same time.
After I completely removed both installations, EPLAN Electric P8 2.9 was reinstalled, which worked in the end.

Problems often arise when uninstalling, especially when two versions are installed at the same time.
Data is not removed here because the first uninstallation removed the entry for it.
In the event of such problems, reinstall and uninstall the product until everything is clean.

If that doesn't help, please write me your operating system (32bit / 64bit) and the exact version of EPLAN.

chakotay
Posts: 17
Joined: Tue Jun 17, 2008 5:29 am
Location: Ganymed

Re: Eplan P8 NEW VERSION 2.8

Post by chakotay » Thu Jan 21, 2021 7:58 am

Cool, thank you. Chapeau.
Eplan 2.7 doesn't work. Eplan 2.9 works. :D

Vasiliy
Posts: 10
Joined: Fri Apr 06, 2018 11:10 am

Re: Eplan P8 NEW VERSION 2.8

Post by Vasiliy » Thu Jan 21, 2021 8:26 am

chaos363 wrote:
Thu Jan 21, 2021 7:46 am
I noticed the spaces and removed them. Since you come to the selection window for the license, your hardware id must be correct. Otherwise a message would appear that the license is not for your computer.

I once had the problem described with myself. Internally, he cannot start the license system, which is why he aborts when it starts. I cannot say what the exact cause is, but at the time I had installed EPLAN Education 2.9 and EPLAN Electric P8 2.9 at the same time. After I completely removed both installations, EPLAN Electric P8 2.9 was reinstalled, which worked in the end.

Problems often arise when uninstalling, especially when two versions are installed at the same time. Data is not removed here because the first uninstallation removed the entry for it.
In the event of such problems, reinstall and uninstall the product until everything is clean.

If that doesn't help, please write me your operating system (32bit / 64bit) and the exact version of EPLAN.
This was a clean install on Windows 8.1 Pro x64 (installed on a VM (VMWare)). I tried to install 2.9.3.14179 and 2.9.4.14642 (after deleting, I thoroughly cleaned the EPLAN traces). License Client (x64) 9.1.17.18800, with the new License Client from 2.9.4.14642 it did not start at all.

Maybe the problem is that all updates are not installed on Windows?

I attach logs from "C: \ Users \ Public \ EPLAN \ Electric P8" https://anonymousfiles.io/hZE55Ekv/

Post Reply