PLCforum.uz.ua

Hi all

It seems that there are problems when trying to import .edz files to EPLAN P8 2.2, so here it is:

0) I'm assuming that you have successfully installed EPLAN P8 2.2. If not check viewtopic.php?f=7&t=18563 ( thanks sadefa and all the guys in rutracker !!!)
I'm also assuming that you are using the "Expert" view, so you get all menus visible.

1) Download "EPLAN P8 EDZ import tool v2.1.6" from viewtopic.php?f=7&t=19500 ( Thanks greeds_ !!!). Unzip & install it.

2) Now, start EPLAN P8 2.2, go to menu "Utilities -> Add-ons..."
In the "Add-ons" window, press "New (Ctrl + Alt + N)".
Navigate to directory: "C:\Program Files (x86)\EPLAN\EPLAN Data Archive Zipped\2.1\cfg", and choose "install.xml".
Click "Open" button.
In the "Add-ons" window, next to the "EPLAN Data Archive Zipped" check the "Registered" check box.
Click "OK"

3) Go to menu "Utilities -> API Add-ins...".
In the "API modules (assemblies)" window, click "Load".
Navigate to directory "C:\Program Files (x86)\EPLAN\EPLAN Data Archive Zipped\2.1\bin", and choose "Eplan.EplAddIn.Emfz.dll"
Click "Open" button.
In the "API modules (assemblies)" window, click "OK".

That's it, you're done!

Now, if you want to import an .edz file, you follow these steps:

4) Go to menu "Utilities -> Parts -> Management...".
In the "Parts Management" window, click "Extras -> Import..."
In the new "Import records" window, choose:
File type: "EPLAN Data Archive"
File name: (Your .edz file that you want to import)
Click "OK"
It may ask you to select additional files to import.
If you have .edz files from Siemens, you can, so choose the right one and click "Import".

If you've finished, then in the "Parts Management" window, click "Close", otherwise repeat the procedure.

It may ask you to synchronize the parts database with your project. If you want, then click "Yes".

glhf

it's seemed 2.2 can read the edz files directly, the additional tools is not needed

brave_eagle wrote:it's seemed 2.2 can read the edz files directly, the additional tools is not needed

please share

part management->import->EPLAN Data Portal format

brave_eagle wrote:part management->import->EPLAN Data Portal format

How do you bypass this message:
"Login to EPLAN Data Portal failed.
An EDZ import is not possible."

(viewtopic.php?f=7&t=18603)

I follow the instructions of the post #1 and the problem still exist.

Thank you very much for the information!! The application works perfectly well.

Sometimes when try to import some files it shows this error

Archive file could not be open. Wrong Local header signature: 0xAFBC7A37

Someone able to solve it?

Thanks a lot

Hi thanks for the help

but when i try to import the files

Wrong Local header signature: 0xAFBC7A37
error code comes up.

Hi to all.
How to solve such a problem?
I also, during the import of the EDZ file appeared. Eplan P8 2.1
Thanks.