[LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
-
- Posts: 1
- Joined: Sun Jul 15, 2012 3:48 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hi
I am also trying to get ver. 2.1.6 working on windows 7 with no luck
Please help
Thanks
I am also trying to get ver. 2.1.6 working on windows 7 with no luck
Please help
Thanks
-
- Posts: 2
- Joined: Fri Jul 13, 2012 9:57 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hi.
please, can i have question?
On which version you used this patch?
I have only EPLAN Electric P8 2.0 SP1 build 4831 and EPLAN Electric P8 2.1 SP1 build 5473.
I tried diferent patches on diferent version but i can't find the right combination![Sad :(](./images/smilies/icon_sad.gif)
Thanks.
Washa
please, can i have question?
On which version you used this patch?
I have only EPLAN Electric P8 2.0 SP1 build 4831 and EPLAN Electric P8 2.1 SP1 build 5473.
I tried diferent patches on diferent version but i can't find the right combination
![Sad :(](./images/smilies/icon_sad.gif)
Thanks.
Washa
manepipoca wrote:Hi!
With x32 and WinXP this works fine:
.................
Best Regards!
(=
-
- Posts: 9
- Joined: Mon Oct 24, 2011 9:12 am
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
I have few cracks. Sometimes works one, sometimes works another.
I am using ePLAN P8 2.1 SP1 (= 2.1.6) build 5473 at two computers.
On my notebook with Windows 7 x86 works crack with SN-U1006.EFG and this procedure:
On my second computer (desktop) there are Windows 7 x64 and previous crack does not works propertly.
The differences which I have to do are:
Interesting is that at my previous Win7 x64 (cracked) installation (E5200 / 4 GB) was ePLAN working even the test mode was disabled.
At my actual Win7 x64 (legal) installation (i7-3770 / 16 GB) is working only when the Windows are in the test mode.
Hope that helpes ...
My question:
It is possible to use Data Portal when I am using cracked version of ePLAN? How?
I am using ePLAN P8 2.1 SP1 (= 2.1.6) build 5473 at two computers.
On my notebook with Windows 7 x86 works crack with SN-U1006.EFG and this procedure:
manepipoca wrote: -Disable UAC;
-Install Eplan P8 2.1;
-Go to control panel. There you will find licence client. Right click and click change. There you can disable the HL drivers.
-Copy the file "SN-U1006.EFG" into "C:\Documents and Settings\All Users\Application Data\EPLAN\Common" (Depends OS);
-Registry the file "SN-U1006.EFG" simply click on it;
-Run "install.cmd", are in the folder x32 or x64 of the downloaded file;
-Run "dseo13b.exe", click on next, and check the option "Enable Test Mode", click on next. Choose "Exit" and click on Next;
-Restart your computer;
-Run "dseo13b.exe", click on next, and check the option "Sign a System File" click on next, put this path: "C:\Windows\System32\Drivers\multikey.sys" and confirm. Choose "Exit" and click on Next;
-Restart your computer;
-Run "dseo13b.exe", click on next, and check the option "Disable Test Mode", click on next. Choose "Exit" and click on Next;
-Run Eplan 2.1
On my second computer (desktop) there are Windows 7 x64 and previous crack does not works propertly.
The differences which I have to do are:
The difference at x64 is that I have to stay in TEST mode. Otherwise the hardlock driver is not loaded.grmm wrote:Instructions:
-Add the data to the registry by running 5189.reg from the archive
-Install the new drivers (HASPUserSetup.exe)
-NEW HARD...UPDATING.....
-EPLAN 2.1.6 is running in TEST mode!
Interesting is that at my previous Win7 x64 (cracked) installation (E5200 / 4 GB) was ePLAN working even the test mode was disabled.
At my actual Win7 x64 (legal) installation (i7-3770 / 16 GB) is working only when the Windows are in the test mode.
Hope that helpes ...
My question:
It is possible to use Data Portal when I am using cracked version of ePLAN? How?
-
- Posts: 1
- Joined: Sun Aug 19, 2012 5:25 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hello Everybody
I installed P8 2.1, but i was using 1.9.11. I was making backup with Project--->Back up---> Project function. But now. I tried to Restore them, there is no project seen at the Restore table...
Then I copied the my old project folder to the new one. I opened the project but its just readable, i couldn't edit it. What should i do?
You can see the message at the pic.
![Image](http://img803.spamm.us/img803/5822/eplan.jpg)
I installed P8 2.1, but i was using 1.9.11. I was making backup with Project--->Back up---> Project function. But now. I tried to Restore them, there is no project seen at the Restore table...
Then I copied the my old project folder to the new one. I opened the project but its just readable, i couldn't edit it. What should i do?
You can see the message at the pic.
![Image](http://img803.spamm.us/img803/5822/eplan.jpg)
-
- Posts: 12
- Joined: Mon May 23, 2011 12:14 pm
- Location: HR
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
None of the cracks work properly on ePlan v2.1. License "38269" is some sort of demo license which allows only 10 pages, that's why you get read-only project. Other licenses like "10066" don't work on v2.1. Last properly cracked ePlan version is v2.0 SP1, no limitations on that version. Unfortunatelly it doesn't work together with ProPanel and SchematicGenerator which are version 2.1.
-
- Posts: 9
- Joined: Mon Oct 24, 2011 9:12 am
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
SN-U1006.EFG works on 2.1 SP1 propertly without any limitations.
See my previous post.
See my previous post.
-
- Posts: 92
- Joined: Thu Sep 06, 2007 10:58 am
- Location: Vietnam
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Eplan Electric P8 v2.1.4 Sp1 (link: http://www.plcforum.uz.ua/viewtopic.php?f=7&t=17643 ) works on my PC with Windows 7x64 Enterprise Sp1(build 7601) and Test Mode only!
-
- Posts: 12
- Joined: Mon May 23, 2011 12:14 pm
- Location: HR
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Where can I download this "SN-U1006.EFG" to test it? If you mean "SN-U10066.EFG" that one doesn't work with version 2.1.SN-U1006.EFG works on 2.1 SP1 propertly without any limitations.
See my previous post.
I've tested (on clean W7 machine) ePlan's v2.0, v2.0 SP1, v2.1, v2.1 SP1. v2.0 SP1 is the last version that works properly with cracks posted here. Maybe you can post here crack that you use, so I can test it, and confirm that it works?Eplan Electric P8 v2.1.4 Sp1 (link: http://www.plcforum.uz.ua/viewtopic.php?f=7&t=17643 ) works on my PC with Windows 7x64 Enterprise Sp1(build 7601) and Test Mode only!
-
- Posts: 94
- Joined: Sun May 28, 2006 10:28 am
- Location: Bosnia&Hercegovina
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
lets wait sadefa's uploading the newest version 2.2.5 build 6338 both p8 and pro panel for testing ![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
-
- Posts: 92
- Joined: Thu Sep 06, 2007 10:58 am
- Location: Vietnam
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Eplan P8 v2.1 SP1 and ProPanel V2.1 SP1 work properly together on my Laptop with Win7x64 Enterprise build 7601 (only in Test Mode).Risky73 wrote:None of the cracks work properly on ePlan v2.1. License "38269" is some sort of demo license which allows only 10 pages, that's why you get read-only project. Other licenses like "10066" don't work on v2.1. Last properly cracked ePlan version is v2.0 SP1, no limitations on that version. Unfortunatelly it doesn't work together with ProPanel and SchematicGenerator which are version 2.1.
Cracked as Bonavox's post!
-
- Posts: 8
- Joined: Wed Sep 08, 2010 6:09 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Thank you for this Information.I made the same experience.Risky73 wrote:None of the cracks work properly on ePlan v2.1. License "38269" is some sort of demo license which allows only 10 pages, that's why you get read-only project. Other licenses like "10066" don't work on v2.1. Last properly cracked ePlan version is v2.0 SP1, no limitations on that version. Unfortunatelly it doesn't work together with ProPanel and SchematicGenerator which are version 2.1.
The thread creator should also include this into the 1st post here.
No need to to reinvent the wheel again and again.
It makes no sense, that everybody has to suffer this experience, waste hours for trying.
-
- Posts: 8
- Joined: Wed Sep 08, 2010 6:09 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Then please be so kind and share this working combo with us. I am not the only one, who is tired of trying a bunch of non-working cracks.van8x10 wrote:Eplan P8 v2.1 SP1 and ProPanel V2.1 SP1 work properly together on my Laptop with Win7x64 Enterprise build 7601 (only in Test Mode).
Cracked as Bonavox's post!
e.g.
Eplan v2.1x build xxx (pereferably with links)
+link for working and tested crack (mention if tested with x86, x64, but preferably both)
Thanks
-
- Posts: 47
- Joined: Sun Sep 06, 2009 4:51 pm
- Location: Europe
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
To All gays about installing dongle.
Sometimes it is help to reinstall License Client.
Please help, if somebody knows to help me in my problem.
By my stupid inspiration I made some changes in Rights of Eplan Master settings .Now the program ask for me to login .I live a default place without entering in password field anything (as I did during a changes), but it says wrong password .How I can solve that problem .
Reinstallation not help.
--------------------------
added
--------------------------
OK!
It was easy.
Login as ADMINISTRATOR,and all right.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Sometimes it is help to reinstall License Client.
Please help, if somebody knows to help me in my problem.
By my stupid inspiration I made some changes in Rights of Eplan Master settings .Now the program ask for me to login .I live a default place without entering in password field anything (as I did during a changes), but it says wrong password .How I can solve that problem .
Reinstallation not help.
--------------------------
added
--------------------------
OK!
It was easy.
Login as ADMINISTRATOR,and all right.
![PostGood (pgood)](./images/smilies/thumbupleft.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
-
- Posts: 10
- Joined: Wed May 23, 2012 11:46 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
guys... i've got windows x64 ultimate and cannot turn on TEST MODE !!!!
any clues ?
this deser13 sth doesn't work... also openin cmd and typing there either....
when I restart system no sign is in four corners![Sad :(](./images/smilies/icon_sad.gif)
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
any clues ?
this deser13 sth doesn't work... also openin cmd and typing there either....
when I restart system no sign is in four corners
![Sad :(](./images/smilies/icon_sad.gif)
-
- Posts: 92
- Joined: Thu Sep 06, 2007 10:58 am
- Location: Vietnam
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Yes, and some more: Don't run crack files or Dongle Emulator in folders with long and Russian name!zart wrote:OK!
It was easy.
Login as ADMINISTRATOR,and all right.![]()
-
- Posts: 1
- Joined: Thu Sep 20, 2012 11:42 pm
Re: EPLAN Electric P8 v2.1.4 EMULATOR
sadefa wrote:For version 2.1 follow the following steps:
...........
6. Install the new drivers (provided into the rar - HASPUserSetup.exe
.............
Regards
Where can I get the HASPUserSetup.exe file. I couldn't find it in any of the downloads.
Thanks in advance
-
- Posts: 27
- Joined: Thu Jun 18, 2009 4:46 pm
- Location: Europe
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hello,
someone has V2.2.5 with crack?
someone has V2.2.5 with crack?
-
- Posts: 12
- Joined: Mon May 23, 2011 12:14 pm
- Location: HR
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
It seems that ePlan v2.1 SP1 works with crack for v2.0. Procedure is:Risky73 wrote:None of the cracks work properly on ePlan v2.1. License "38269" is some sort of demo license which allows only 10 pages, that's why you get read-only project. Other licenses like "10066" don't work on v2.1. Last properly cracked ePlan version is v2.0 SP1, no limitations on that version. Unfortunatelly it doesn't work together with ProPanel and SchematicGenerator which are version 2.1.
- install ePlan v2.0 (SP1)
- crack it with crack for v2.1 SP1, but instead of SN-U38269.EGF/SN-U38269.reg use SN-U10066.EGF (size=978)/5189.reg (size=827)
- check that everything works properly (no limitations on page numbers or similar) in v2.0
- install ePlan v2.1 SP1 WITHOUT!!! Licence Client - everything should work (no limitations...) - it is possible that it works as Basic (not Professional) version
- install ProPanel v2.1 SP1 and similar ALSO WITHOUT License Client
My procedure for crack is:
- Copy SN-U10066.EGF to (WINXP) C:\Documents and Settings\All Users\Application Data\EPLAN\Common or (WIN7) C:\User\Public\Eplan\Common\(X64)
- Run 5189.reg.
- Run\ X32 \ install.cmd or \X64\install.cmd.
- Run dseo13b.exe, choose next and select "Enable Test Mode", next. Choose "Sign a System File", next and write "C:\Windows\System32\Drivers\multikey.sys". Chose "exit", next.
- On Win32 test mode can be deactivated after cracking, run dseo13b.exe and "Disable Test Mode". Win64 needs test mode to stay active.
This is for those people for which crack for ePlan v2.1 doesn't work (like me). For the rest which didn't have this problem, this message is not interesting
![Wink ;)](./images/smilies/icon_wink.gif)
Last edited by Risky73 on Fri Oct 05, 2012 5:44 pm, edited 2 times in total.
-
- Posts: 10
- Joined: Wed May 23, 2012 11:46 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
I cannot run HASPUserSetup.exe in on of steps because of info
"Corrupt installation...plesae reainstall....etc.."
something is wrong with this hasp sentinel
even when I tray to disable License client or hardware key this error pops up![Sad :(](./images/smilies/icon_sad.gif)
sb help![Question :?:](./images/smilies/icon_question.gif)
"Corrupt installation...plesae reainstall....etc.."
something is wrong with this hasp sentinel
even when I tray to disable License client or hardware key this error pops up
![Sad :(](./images/smilies/icon_sad.gif)
sb help
![Question :?:](./images/smilies/icon_question.gif)
-
- Posts: 1
- Joined: Mon Oct 20, 2008 7:59 am
- Location: Europe
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hello I Successfully installed v2.0 SP1
But I have the following problem
I can not import database in menu utilitis>Parts
I do not have Parts managment
in menu
But I have the following problem
I can not import database in menu utilitis>Parts
I do not have Parts managment
![No-No (boom)](./images/smilies/grabli.gif)
-
- Posts: 3
- Joined: Sun Nov 14, 2010 10:37 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hello,
I cant run mx Eplan Build 5325 under my OS Windows 7 x64. I tried serveral things you discribed here but nothing works for me. At all Files I Downloaded there isnt the HASPUserSetup.exe inside but i Download a Version from their Page. Many speak about the SN-U10066.egf and the 5198.reg or SN-U10066.reg but i cant found. I only had the SN-U38269.egf and their .reg file.
I hope anyone of you can help me.
THX
Chris
I cant run mx Eplan Build 5325 under my OS Windows 7 x64. I tried serveral things you discribed here but nothing works for me. At all Files I Downloaded there isnt the HASPUserSetup.exe inside but i Download a Version from their Page. Many speak about the SN-U10066.egf and the 5198.reg or SN-U10066.reg but i cant found. I only had the SN-U38269.egf and their .reg file.
I hope anyone of you can help me.
THX
Chris
-
- Posts: 12
- Joined: Mon May 23, 2011 12:14 pm
- Location: HR
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
SN-U10066.egf and the 5198.reg are cracks for ePlan 2.0 so you can probably find them there.Chris_MC wrote:Many speak about the SN-U10066.egf and the 5198.reg or SN-U10066.reg but i cant found. I only had the SN-U38269.egf and their .reg file
Try with this (my compilation with english instructions) and according to my installation instructions few messages ago:
http://www.filedropper.com/epe21
I don't know if it will work on x64, it works on Win7 x32.
-
- Posts: 3
- Joined: Sun Nov 14, 2010 10:37 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Thanks for the Download. I think it works a little bit more. At the moment i have the Problem hat Eplan says that their is not the right Dongle. So I think that is anything wrong with the Driver or the Version of the Sentinel Driver. Whats the right Name of the Driver and their Version?
Thanks a lot!!!
Thanks a lot!!!
-
- Posts: 12
- Joined: Mon May 23, 2011 12:14 pm
- Location: HR
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
SN-U10066.egf and the 5198.reg don't work with License Manager / Driver from version 2.1, that's why I wrote not to install those but use License Manager from version 2.0. I think that the message you wrote confirms it.
To test this try SN-U38269.EGF/SN-U38269.reg, ePlan should open (demo mode for 10 pages). If it does than you know that you most probably need older License Manager.
To test this try SN-U38269.EGF/SN-U38269.reg, ePlan should open (demo mode for 10 pages). If it does than you know that you most probably need older License Manager.
-
- Posts: 3
- Joined: Sun Nov 14, 2010 10:37 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
I check all you write to me but in no case i can start eplan. At last I've installed Licence Client form Version 2.0 without SP but nothing happens. Anytime the same problem that the Manager say that isn't the right Dongle inside.
-
- Posts: 11
- Joined: Tue Jul 13, 2010 5:42 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
your link (video) dont work please reuploand itsadefa wrote:Hi,
here is a link for the video. Sorry for the poor quality of the speech, but the mic I used was quite old.
Download link for video:
http://www.filesonic.com/file/2310960711
best regards
-
- Posts: 1
- Joined: Fri Sep 28, 2012 9:44 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hi
I spent many hours trying to install eplan 2.1 on win 7 x64 and nothing, grmm post help its working 100% on my win 7 x64 sp1.
You just have to follow the instructions step by step with no errors.
Many thanks
I spent many hours trying to install eplan 2.1 on win 7 x64 and nothing, grmm post help its working 100% on my win 7 x64 sp1.
You just have to follow the instructions step by step with no errors.
Many thanks
-
- Posts: 2
- Joined: Mon Dec 05, 2011 3:42 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Just open Eplan in the Expert mode instead of beginer mode. This will fix the problem.I have a problem when i choose new project Eplan give message to me that "The function 'Restore project' cannot be performed because of the settings defined in the rights management module".
-
- Posts: 4
- Joined: Wed Apr 10, 2013 2:36 am
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
I need instructions step-by-step to crack Eplan 2.2 on my Win7 x64. Many thnks
-
- Posts: 10
- Joined: Wed Sep 25, 2013 9:22 am
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hi all!
When i try to run EPLAN i keep getting popup with this message :
"The current Windows user name does not exist in the rights management function. A Windows user must log on who is also entered in the rights management as a user. The program will now terminate". I think i messed something in the EPLAN before, and now i return to EPLAN v2.1 and this keeps showing.
Please help.
When i try to run EPLAN i keep getting popup with this message :
"The current Windows user name does not exist in the rights management function. A Windows user must log on who is also entered in the rights management as a user. The program will now terminate". I think i messed something in the EPLAN before, and now i return to EPLAN v2.1 and this keeps showing.
Please help.
-
- Posts: 15
- Joined: Sat Sep 03, 2011 1:51 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Hi all.
I have this problem with Eplan P8 2.5 x64
" no matching symbol was found in the project"
when i try to insert black box, or connection symbol, or plc input symbol...
I have this problem with Eplan P8 2.5 x64
" no matching symbol was found in the project"
when i try to insert black box, or connection symbol, or plc input symbol...
-
- Posts: 8
- Joined: Sun Mar 05, 2017 7:17 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
Try cofaso 7.0 electrical cad from cofaso.com
They can import Eplan P8 macros, import / export Eplan 5 projects as well!
https://www.youtube.com/watch?v=ZU7zCpTcPDI
Regards,
Ronnie
They can import Eplan P8 macros, import / export Eplan 5 projects as well!
https://www.youtube.com/watch?v=ZU7zCpTcPDI
Regards,
Ronnie
-
- Posts: 2
- Joined: Sun Sep 08, 2013 9:14 pm
Re: [LINK]: EPLAN Electric P8 v2.1.4 Build 5325 (x86/x64)
I have been trying to solve this problem for 2 days.Bonavox wrote: ↑Thu Jul 26, 2012 1:29 pmI have few cracks. Sometimes works one, sometimes works another.
I am using ePLAN P8 2.1 SP1 (= 2.1.6) build 5473 at two computers.
On my notebook with Windows 7 x86 works crack with SN-U1006.EFG and this procedure:manepipoca wrote: -Disable UAC;
-Install Eplan P8 2.1;
-Go to control panel. There you will find licence client. Right click and click change. There you can disable the HL drivers.
-Copy the file "SN-U1006.EFG" into "C:\Documents and Settings\All Users\Application Data\EPLAN\Common" (Depends OS);
-Registry the file "SN-U1006.EFG" simply click on it;
-Run "install.cmd", are in the folder x32 or x64 of the downloaded file;
-Run "dseo13b.exe", click on next, and check the option "Enable Test Mode", click on next. Choose "Exit" and click on Next;
-Restart your computer;
-Run "dseo13b.exe", click on next, and check the option "Sign a System File" click on next, put this path: "C:\Windows\System32\Drivers\multikey.sys" and confirm. Choose "Exit" and click on Next;
-Restart your computer;
-Run "dseo13b.exe", click on next, and check the option "Disable Test Mode", click on next. Choose "Exit" and click on Next;
-Run Eplan 2.1
On my second computer (desktop) there are Windows 7 x64 and previous crack does not works propertly.
The differences which I have to do are:The difference at x64 is that I have to stay in TEST mode. Otherwise the hardlock driver is not loaded.grmm wrote:Instructions:
-Add the data to the registry by running 5189.reg from the archive
-Install the new drivers (HASPUserSetup.exe)
-NEW HARD...UPDATING.....
-EPLAN 2.1.6 is running in TEST mode!
Interesting is that at my previous Win7 x64 (cracked) installation (E5200 / 4 GB) was ePLAN working even the test mode was disabled.
At my actual Win7 x64 (legal) installation (i7-3770 / 16 GB) is working only when the Windows are in the test mode.
Hope that helpes ...
My question:
It is possible to use Data Portal when I am using cracked version of ePLAN? How?
In my both notebook and PC the windows 7 x64 is used as operating system and I can only work Eplan P8 2.6 in test mode.
I think in win 8 and win 10 there is no mode like test mode.
-
- Posts: 5
- Joined: Mon Nov 07, 2016 5:40 pm