Problem transferring program with ComText to TD20

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
diorgesf
Posts: 1
Joined: Mon Aug 31, 2020 8:32 pm

Problem transferring program with ComText to TD20

Post by diorgesf » Thu Sep 03, 2020 1:41 pm

I need to upload a program from an old HMI TD 20 and download it on another TD20.
I have a PC/TTY interface and using Coros ComText.

When selecting the interface in ComText I get the error: "AS511 special files do not exist".
and when starting the transfer the error: "Mess.081: Trans. error during COM <-> TDOP".

Do I need a special drive to use the PC/TTY S5 cable?

When starting the TD20 I have the option of V24 and TTY.
When I select V24 it is ready to transfer.
When I select TTY it immediately carries the message "006 COM-Transfer Fail"
I also cannot find the Siemens TD20 HMI manual

I am in a virtual machine with windows 98 and the computer has a physical serial port.

sanyisz
Posts: 5
Joined: Mon Sep 16, 2013 8:03 pm

Re: Problem transferring program with ComText to TD20

Post by sanyisz » Thu Sep 24, 2020 11:52 pm

Which version of COMTEXT you use ?

sanyisz
Posts: 5
Joined: Mon Sep 16, 2013 8:03 pm

Re: Problem transferring program with ComText to TD20

Post by sanyisz » Thu Sep 24, 2020 11:58 pm

You wrote: "When selecting the interface in ComText"
In which menu point is this?
I'm not member that COMTEXT has "select interface" setting.

Post Reply