Tp 177 A HMI

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
No where
Posts: 1
Joined: Mon Aug 10, 2020 3:18 pm

Tp 177 A HMI

Post by No where » Mon Aug 10, 2020 3:27 pm

Hello all

I am trying to communicate with the hmi through 19.2k baudrate with no succes only 187.5k is working

Dont know why?

And mpi/profibus setting in hmi

The hmi dosn't accept 19.2k baudrate
Once i choose 19.2k baudrate it go back to 187.5k
And the plc program baudrate is 19.2 k

Any explaintion

Dfcz
Posts: 875
Joined: Tue Dec 26, 2006 5:21 am
Location: Russia

Re: Tp 177 A HMI

Post by Dfcz » Sat Aug 15, 2020 7:47 pm

Why connect at a slow speed when you can connect at a high speed?

pegaso65
Posts: 2
Joined: Fri May 15, 2015 12:08 pm

Re: Tp 177 A HMI

Post by pegaso65 » Sat Aug 29, 2020 2:38 pm

the speed is set in the project, can't set it on panel

Post Reply