[?]: Problem with WinCC Alarm Logging

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
Nioton2000
Posts: 17
Joined: Mon Sep 29, 2008 6:49 pm
Location: Iran

[?]: Problem with WinCC Alarm Logging

Post by Nioton2000 » Tue Apr 23, 2019 7:03 pm

Hi dears
I encountered a problem in winCC v7.3 .When alarms occur In the 'WinCC AlarmControl' activeX , the 'Message text' is shown blank. While the date and time appear correctly.I think I've done all the settings in the 'Alarm Logging' correctly. please help me.
best regards
Last edited by Nioton2000 on Tue Apr 30, 2019 3:33 am, edited 1 time in total.

Usver
Posts: 191
Joined: Fri Feb 24, 2012 8:28 am

Re: [?]: Problem with WinCC Alarm Logging

Post by Usver » Wed Apr 24, 2019 5:05 am

May be you need to install last update for wincc. https://support.industry.siemens.com/cs ... 0&lc=en-US

Nioton2000
Posts: 17
Joined: Mon Sep 29, 2008 6:49 pm
Location: Iran

Re: [?]: Problem with WinCC Alarm Logging

Post by Nioton2000 » Fri Apr 26, 2019 4:11 pm

Hello Usver
I installed the latest update, but the problem did not fix.
Thanks for your suggestion

Usver
Posts: 191
Joined: Fri Feb 24, 2012 8:28 am

Re: [?]: Problem with WinCC Alarm Logging

Post by Usver » Sun Apr 28, 2019 3:30 pm

What is languiges of your OS and project? Upload screens of settings in the 'Alarm Logging' and WinCC AlarmControl.

Nioton2000
Posts: 17
Joined: Mon Sep 29, 2008 6:49 pm
Location: Iran

Re: [?]: Problem with WinCC Alarm Logging

Post by Nioton2000 » Sun Apr 28, 2019 7:16 pm

The suggestion to check the language of the project was excellent. In fact, the language of the project was English, but the language of the system was persian in the Windows control panel (regional and language). By changing the system language into English, the problem was solved.
Thank you for your help (clap)

Post Reply