[?+]: MP 377 12" Touch Transfere - stop on 90%

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
omar zedan
Posts: 236
Joined: Sat Oct 22, 2011 7:12 am

[?+]: MP 377 12" Touch Transfere - stop on 90%

Post by omar zedan » Mon Jan 14, 2013 8:44 am

Dear All
I use WinCC Flex. to build and transfere project to MP 12" touch, When I Transfere the project, its transfere (about 90%) and ended with message error (..... there is no memory card )
I did not use a memory card, How Can I fix this error???
Thanks

Umencho
Posts: 508
Joined: Mon Jul 16, 2007 12:28 pm
Location: Europe

Re: [?]: MP 377 12" Touch Transfere - stop on 90%

Post by Umencho » Mon Jan 14, 2013 7:17 pm

You can try it with some very simple project...You already made reset to factory settings, right?

BR

peterc101
Posts: 34
Joined: Mon Oct 11, 2010 12:54 pm

Re: [?]: MP 377 12" Touch Transfere - stop on 90%

Post by peterc101 » Mon Jan 14, 2013 7:48 pm

you are trying to download a memory card file ( .pdz ) to a panel without a memory card
when you make transfer uncheck transfer of the .pdz file

omar zedan
Posts: 236
Joined: Sat Oct 22, 2011 7:12 am

Re: [?]: MP 377 12" Touch Transfere - stop on 90%

Post by omar zedan » Wed Jan 16, 2013 7:34 am

Thank you, its work now

Thanks for your interest and help
I solve the problem by changing the version of WinCC Flex to SP2
- In transfer I use Device Status button the version is 1.0.4 (of the panel)
-I install the SP2 (the image is 1.0.4 too)
-I make transfer but the transfer 90% and stoped then I change the setting in Panel (Transfer --> download path "or some thing")
and its worked.

Post Reply