[?+]: Transfering Asian project to hmi mp277 touch

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
Mikel_010201
Posts: 12
Joined: Mon Oct 19, 2009 7:38 am

[?+]: Transfering Asian project to hmi mp277 touch

Post by Mikel_010201 » Mon Mar 14, 2011 4:45 am

Hi im Mike from Philippines (Southern and Eastern Asia) can you please help me to my problem we had a new hmi mp277 10" touch, when i transfer the project it cannot continue compiling and also when i test the runtime it cannot work also, but no message appeared on the screen.
Our program is original came from OEM japan the program is made from winccflex 2007 and i successfully transfer to 2008.
I set the configuration correct because i test it to other program and it work.
i had no idea where is my mistake i hope you can help me\.


Thanks and Best Regards!!!!!
Mike

sania
Site Admin
Posts: 1372
Joined: Sat Aug 13, 2005 6:15 am
Contact:

Re: Transfering project to hmi mp277 touch

Post by sania » Mon Mar 14, 2011 4:50 am

if you " had no idea" - upload your project in rapidshare,post link,any one can check it

Mikel_010201
Posts: 12
Joined: Mon Oct 19, 2009 7:38 am

Re: Transfering project to hmi mp277 touch

Post by Mikel_010201 » Mon Mar 14, 2011 5:10 am

Sir thank you very much for your attention tommorow i will upload the project to rapidshare.



Regards!!!
Mike

sania
Site Admin
Posts: 1372
Joined: Sat Aug 13, 2005 6:15 am
Contact:

Re: [?]: Transfering project to hmi mp277 touch

Post by sania » Mon Mar 14, 2011 7:06 pm

first try:
file -> compiler -> rebild all

Homeroid_BL
Posts: 259
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: [?]: Transfering project to hmi mp277 touch

Post by Homeroid_BL » Tue Mar 15, 2011 7:55 am

Mike, if program was created in WinCC Flex 2007 and you are usng WinCC Flex 2008 to download it, I believe that you need to update Operating system first, since new panel image was delivered with WinCC Flex 2008.

Mikel_010201
Posts: 12
Joined: Mon Oct 19, 2009 7:38 am

Re: [?]: Transfering project to hmi mp277 touch

Post by Mikel_010201 » Thu Mar 17, 2011 3:45 am

Thanks homeroid_BL for your suggestion, I try that but it doesn't work ..
I try to rebuild all here is the massage appeared on the screen.
00:55:09.70 Compiler Info : 1% done, 7639 steps remaining ...
00:55:10.64 Compiler Info : 2% done, 7565 steps remaining ...
00:55:11.64 Compiler Info : 21% done, 6145 steps remaining ...
00:55:12.14 Compiler Info : 25% done, 5845 steps remaining ...
00:55:12.64 Compiler Info : 32% done, 5245 steps remaining ...
00:55:13.14 Compiler Info : 67% done, 2545 steps remaining ...
00:55:11.40 Compiler Info : 9% done, 7051 steps remaining ...
00:55:13.65 Compiler Info : ### FAILED with 2 error(s), 0 warning(s).
00:55:08.92 Compiler Info : Compiling 22 delta steps ...
00:55:13.65 Compiler Info : Compiling finished!
00:55:08.92 Compiler Info : Compiling started ...
00:55:13.65 Compiler Error : Invalid symbol assignment for area pointer 'Job mailbox'.
00:55:13.65 Compiler Error : Invalid symbol assignment for area pointer 'Screen number'.
00:55:13.14 Compiler Info : Linking target 'デバイス_1' ...
00:55:13.14 Compiler Info : Number of generated tags: 78.
S

Sania here is the link of original program HMI including the PLC program came from OEM.

Link_is_Dead :(/6 ... progam.rar

sania
Site Admin
Posts: 1372
Joined: Sat Aug 13, 2005 6:15 am
Contact:

Re: [?]: Transfering project to hmi mp277 touch

Post by sania » Fri Mar 18, 2011 4:15 pm

pack & upload again i have problem with unrar

CoMod
Site Admin
Posts: 3971
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: Transfering project to hmi mp277 touch

Post by CoMod » Fri Mar 18, 2011 5:48 pm

sania wrote:pack & upload again i have problem with unrar
try winrar 4 http://rarlab.com/download.htm
or
Link_is_Dead :(/6 ... progam.zip

and delete file LANGUAGE in folder Global
but this project is for Asian versions (boom)

Homeroid_BL
Posts: 259
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: [?]: Transfering project to hmi mp277 touch

Post by Homeroid_BL » Fri Mar 18, 2011 7:20 pm

Mikel_010201,

see under Communication/Connection, tab 'Area pointers' (next to 'Parameters' tab).

Your problem is there.

CoMod
Site Admin
Posts: 3971
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: Transfering project to hmi mp277 touch

Post by CoMod » Fri Mar 18, 2011 9:41 pm

00:55:13.65 Compiler Error : Invalid symbol assignment for area pointer 'Job mailbox'.
00:55:13.65 Compiler Error : Invalid symbol assignment for area pointer 'Screen number'.
00:55:13.14 Compiler Info : Linking target 'デバイス_1' ...
:anon: Rename some Japanese names (=Invalid symbol) to English (valid symbol)
and reconnect DB33 and DB34
Image


after this project work

Mikel_010201
Posts: 12
Joined: Mon Oct 19, 2009 7:38 am

Re: [?+]: Transfering Asian project to hmi mp277 touch

Post by Mikel_010201 » Sun Mar 20, 2011 7:41 am

Thanks To all, I will try these when i goes back to work and ill give you an update .

(clap) (clap) (clap) (clap) (clap)

Thanks and Regards!
Mike

Mikel_010201
Posts: 12
Joined: Mon Oct 19, 2009 7:38 am

Re: [?+]: Transfering Asian project to hmi mp277 touch

Post by Mikel_010201 » Thu Apr 07, 2011 9:55 am

Hello to all

Thank you for helping me now i reslove the problem your all correct,thank you guys (clap) (clap)

Post Reply