PLCforum.uz.ua

РРР, you are planning to implement the removal of the password to the F- Program?

Does anybody know how to remove or get password (know how protection) from Sinamics Starter scripts?

hello, has anybody tried to access a full password protected (for writing and also for reading) mmc card? i do not have access to the project folder situated only on the mmc in order for the pss7 1.82 to read the password that is setup on the project itself.
i tried with a card reader inside a siemens computer and it didn't work, it wouldn't let me acces the mmc, evens if i saw the structure of the project itself.
a friend of mine suggested to buy an usb prommer; the prommer connected to a pc offers the possibility for the pss7 to conect to the device and read the password.
can anybody help me with this?
kind regards,

PPP and guys please,

I downloaded WinccNoProtect.exe and use it in Windows XP Pro to remove the passwords from C-scripts but is not working.
I have closed all the projects. How this patch should be used ?
Thank you.

Hi everyone,

Can this software discover the CPU password?
I have a Siemens 222 CN and I cant upload the project.

Thanks a lot.

updata to v1.83
fix bugs:
wincc vb scripts
elau epas4

mirrors:
http://www54.zippyshare.com/v/CdUEhfS5/file.html
http://rgho.st/6kfwdZBWc
https://1fichier.com/?psub7kfewi
http://ge.tt/3zZ5kAc2
https://www.upload.ee/files/5945940/pss7_v1.83.exe.html

https://virustotal.com/ru/file/62767ffb ... 467803280/
3/52 DrWeb, McAfee-GW-Edition, Qihoo-360

ppp wrote:updata to v1.83

Great thanks!
It just works like magic.
Please consider unPassword wincc picture password. It is new for wincc 7.2/7.3/7.3SE/7.4
Good luck.

http://www.mediafire.com/download/157c0 ... 1510cm.zip
I have a project as above link, But I can't find password of safety FC.
Please help me to find it.
Thanks and best regards,

Are there Soft for unPassword TIA Portal 13; 14 (s7-1200; S7-1500) and S7-Distributed Safety?
https://www.slideshare.net/AlexanderTim ... lideshow=1

https://github.com/atimorin/scada-tools ... tractor.py

Code: Select all

https://github.com/atimorin/scada-tools/blob/master/s7_password_hashes_extractor.py

If PPP could add TIA-12/1500 CPU, it will be much more great!!

Also as mentioned by others, WINCC-V7.3 picture password is needed in future.

PPP up!

pss7_v1.84a
fix bug passwords for wincc vb-script
Thanks to cuihl

https://www90.zippyshare.com/v/XTUzhDs1/file.html

My Avast blocked to download updated version of pss7.exe too

PPP uses bad Crypt packer for decrease size and for anti reverse analyzing
Russian wrote: PPP использует плохие упаковщики для уменьшения размера файла и чтобы никто не смог разобрать и понять логику его программы
\\
=========== if you're afraid of threats - Use in Virtual Machine ==================
=========== если боитесь угрозы - используйте на Виртуальной Машине ==================

passworded ZIP - password for unpack 1
https://mega.nz/#!SOxy1SZQ!RPJTyCrQBxHC ... tqAOTHrAXM
https://disk.yandex.ru/d/10fLlqQsVX1Q9w

Эта утилита изначально ХАКЕРСКАЯ!
Она ищет пароли в проектах!
Через некоторое время ее в свои базы и другие антивирусы включат, а не эти 5 никому не известных

Hi ,
i'am tryng to unlock a *.Bmo file(wincc 7.2) , but unPassword software doesn''t reconize it as password protected .
Any advice ?
Thanks

it is safe to use virtual box for this kind of softwares?

is the software can get the picture password?

coslad wrote: ↑

Mon Jul 15, 2019 4:38 pm

Hi ,
i'am tryng to unlock a *.Bmo file(wincc 7.2) , but unPassword software doesn''t reconize it as password protected .
Any advice ?
Thanks

I get the same result when trying to unpassword vb-script. The software did recognize password for c-script.
I used the 1.84 version

Dear ppp,
Do you have update for pss7?
I use this version for unlocking winCC v7.4 sp1. it can be used to unlock c-script, but it cannot find vb-script password.

please upload your project, maybe i can help you

Here is the project. And please also get the picture password.
Thanks.

https://mega.nz/folder/VqgklSjC#e69j54S1qqzxAabR-4-aZg

sorry I cannot download it

I can download the file without login to mega.
But here is the alternative link
https://drive.google.com/file/d/1T4e4sw ... sp=sharing

dj1178 wrote: ↑

Mon Aug 24, 2020 7:54 am

sorry I cannot download it

Can you download the project from the link I share?

joozzer wrote: ↑

Mon Aug 24, 2020 6:54 am

Here is the project. And please also get the picture password.
Thanks.

https://mega.nz/folder/VqgklSjC#e69j54S1qqzxAabR-4-aZg

You can try to ignore the screen password, and then directly press the confirm key to open the screen

I use this version for unlocking winCC v7.4 sp1. it can be used to unlock c-script, but it cannot find vb-script password.

Hi,
Could you tell me please how to unlock the C Script?
I've used the pss7_v1.84a, but it doesn't work.
I would like to know if someone of you know a way to unlock a WinCC C script.
Basically they are a file with a .fct exention, i've been able to open it in a binary mode, but nothing else.
Any suggest?
Thanks Peter.
Thanks!

Hi, I have the same problem with the C Script, did you manage to open it?

In my case, pss7_v1.84a gave me the C script password. But cannot detect the vb script password.

Pss7_v1.840a not supported for wincc 7.5 vbscript

I have also tried to get C Script password . But It didn't detect C Script. It showing empty folder. i.e it is not going into files.

Anyone please may upload pass.exe ?
Any link are died !

Thank you

Plc_ITA

PLC_ITA wrote: ↑

Wed Sep 14, 2022 5:25 pm

Anyone please may upload pass.exe ?
Any link are died !

Mega live ...
passworded ZIP - password for unpack 1
https://mega.nz/#!SOxy1SZQ!RPJTyCrQBxHC ... tqAOTHrAXM
https://disk.yandex.ru/d/10fLlqQsVX1Q9w

Thank you !!!!

Please remove the password. Thank a lot.

https://mega.nz/folder/FUcDHbhZ#ype9mjVc3lUikeU-5PlhFQ