Request: Eberle PLS514 - EDOPS Software

другие контроллеры
Post Reply
gonsoplc
Posts: 11
Joined: Tue May 27, 2008 2:36 pm
Location: Europe

Request: Eberle PLS514 - EDOPS Software

Post by gonsoplc » Tue Sep 30, 2008 8:48 pm

Hi

¿Anyone have the software EDOPS for Eberle PLS514?

Many tanks

JanLand
Posts: 25
Joined: Wed Jun 14, 2006 7:51 am
Location: Europe

Post by JanLand » Fri Oct 03, 2008 5:57 am

Hello

See my topic about eberle.

JanLand
Posts: 25
Joined: Wed Jun 14, 2006 7:51 am
Location: Europe

Post by JanLand » Mon Oct 06, 2008 6:37 am

Hello Gonsoplc

I have to read my manuals about the transfer.
I know that there are PLC that are only connected using a Eberle box
using edops has no use.

gonsoplc
Posts: 11
Joined: Tue May 27, 2008 2:36 pm
Location: Europe

Post by gonsoplc » Mon Oct 06, 2008 8:44 am

Ok,

I used Eberle cable DL 7.6 whit a any type of "dongle".
¿Can you give me copy of manual PLS 514 or any information about this PLC? I don´t have information and i have very interested.

Many tanks

JanLand
Posts: 25
Joined: Wed Jun 14, 2006 7:51 am
Location: Europe

Post by JanLand » Mon Oct 06, 2008 8:05 pm

Hello gonsoplc,

I found some information about the PLS 514
it vcan be programmed using a PG 3 this is a sort off handheld computer / programmer or using the edops program.
the cable DL7.6 doesn't mean anything to me, in the documents I have they only talk about a RS232 cable.

by the way were do come frome because I know that there are still some distributors ore contractors which can help.

JanLand
Posts: 25
Joined: Wed Jun 14, 2006 7:51 am
Location: Europe

Post by JanLand » Mon Oct 06, 2008 8:10 pm

Hello again

I found this link maybe it helps

http://www.control.com/1026162756/index_html

Post Reply