Request: NAIS FPWINPro 5.1.01 Full Version File

другие контроллеры
Post Reply
brave_eagle
Posts: 166
Joined: Thu Oct 20, 2005 12:24 pm
Location: China

Request: NAIS FPWINPro 5.1.01 Full Version File

Post by brave_eagle » Sat Dec 24, 2005 1:09 pm

Pls. copy these two files to your FPWINPro main directory replacing the original files, thenyou can enjoy a full version FPWINPRO
Delete by timeout wrote:FPWINPro_Version_Full_Files_5.101.zip
If you want to get onther NAIS software, FPWIN GR, GTWIN........
Pls. reply this topic
Good Luck

Galli
Posts: 38
Joined: Sat Jun 30, 2007 5:36 am

Post by Galli » Sun Sep 16, 2007 7:41 pm

You can download FPWinPro5.10 and version 5.22 from Nais (Panasonic) website.

Here the medicine --> FPWINPro5.0_crc.rar

http://www.cvalka.com//index.php?&direc ... ry=Simatic

or

Link_is_Dead :(/FP ... c.Link_is_Dead :(


Procedure --> follow the instruction for s7-200, same procedure.
http://www.plc.net.ru/viewtopic.php?t=5843

I tested, its working.

gremlin
Posts: 159
Joined: Fri Aug 10, 2007 10:02 pm
Location: Europe

Post by gremlin » Wed Sep 19, 2007 9:05 pm

how do you use this .inx file ?
when i search my c: drice for setup.inx after runing the demo download from panasonic site i dont find any setup.inx to swap with downloaded file to be able to run again the setup ?
i am using windows XP sp2

thanks

gremlin

Galli
Posts: 38
Joined: Sat Jun 30, 2007 5:36 am

Post by Galli » Wed Sep 19, 2007 11:43 pm

As s7-200,

Start the Setup and go to your lokal\Temp folder, wait up the language Dialog from Setup and save the complete new folder on an other place.
There folder may be created in the following directory..
(I think \Windows\Temp, or Document Settings\Admin\Temp )

Thereafter you can abort the setup.

Replace the setup.inx file with the new file and start the setup again

Galli
Posts: 38
Joined: Sat Jun 30, 2007 5:36 am

Post by Galli » Wed Sep 19, 2007 11:52 pm

Dont download the demo file..
Download the full version 5.xx
and the upgrade file 5.22...

After swap the .inx, then upgrade to 5.22

gremlin
Posts: 159
Joined: Fri Aug 10, 2007 10:02 pm
Location: Europe

Post by gremlin » Fri Sep 21, 2007 8:38 pm

Got it sorted !
thanks
temp folder was in stupid place due to network config

all the best

gremlin

niila
Posts: 94
Joined: Sun May 28, 2006 10:28 am
Location: Bosnia&Hercegovina

Post by niila » Sat Sep 22, 2007 11:30 am

hi galli..
There are only version 5.101 ,for upgrade 5.0 to 5.101, and 5.22 demo version on panasonic website..
where is the full version? :roll:

Galli
Posts: 38
Joined: Sat Jun 30, 2007 5:36 am

Post by Galli » Sat Sep 22, 2007 5:22 pm

Last time have ...

Image

niila
Posts: 94
Joined: Sun May 28, 2006 10:28 am
Location: Bosnia&Hercegovina

Post by niila » Sun Sep 23, 2007 8:08 am

hi galli..
thanks a lot for info,I was heedless of this software..

I downloaded fpwin 5.10 difference file and 5.22 difference file but those files are most likely for upgrade because ;
mew(panasonic website) says ;
Panasonic wrote:''The Control FPWIN Pro Ver.5.22 difference file is used to upgrade Control FPWIN Pro Ver.5.1 or later to Ver.5.22.

This file does not work on its own.
To install this software, Control FPWIN Pro Ver.5.1 must already be installed''
and when I had installation to 5.10 difference file it requests version 5 :roll:

Galli
Posts: 38
Joined: Sat Jun 30, 2007 5:36 am

Post by Galli » Sun Sep 23, 2007 9:02 am

If follow the above procedure,
I got something like this, with the above serial number, username, etc..

Image

niila
Posts: 94
Joined: Sun May 28, 2006 10:28 am
Location: Bosnia&Hercegovina

Post by niila » Sun Sep 23, 2007 9:26 am

hi galli..
thanks a lot..I solved.That's great... :lol: also; after installation I restarted to computer and computer gave me;update error(invalid data) is it normal?

fatech
Posts: 18
Joined: Tue Dec 05, 2006 4:13 am
Location: Asia

Help again

Post by fatech » Thu Oct 04, 2007 3:02 am

Hi Galli,
When I do your direction, Program notice will setup the Full version.
But when it needs the serial, I type any serial, program notices the wrong serial, so i type the same serial in the notepad file, it continues.
When program need choose the destination folder as C:\Program Files\Nais Control\FPWin Pro 5, I choose OK, it notices

Error Number : 0x80040706
Description : Object reference not set
Setup wil terminate

Please help me solve this problem
Many Thanks

Galli
Posts: 38
Joined: Sat Jun 30, 2007 5:36 am

Re: Help again

Post by Galli » Sat Oct 06, 2007 2:42 pm

fatech wrote:Hi Galli,
When I do your direction, Program notice will setup the Full version.
But when it needs the serial, I type any serial, program notices the wrong serial, so i type the same serial in the notepad file, it continues.
When program need choose the destination folder as C:\Program Files\Nais Control\FPWin Pro 5, I choose OK, it notices

Error Number : 0x80040706
Description : Object reference not set
Setup wil terminate

Please help me solve this problem
Many Thanks
Honestly I dont know what yr error code stand for and fix that problem..
I only have an idea how to install FPWin Pro 5.10 afterI read the s7-200 procedure..
This procedure may apply to MELSEC software as well, I think..

saad rashed
Posts: 44
Joined: Tue Jun 26, 2007 12:41 pm
Location: Egypt

FPwinProV5.22 FULL

Post by saad rashed » Mon Nov 12, 2007 12:33 pm


Post Reply