Page 1 of 1

[LINK]: OLD VT100 ESA (for MS-DOS only)

Posted: Fri Jun 16, 2006 7:32 pm
by flopez
Hello personal I needed a program to work with the terminal VT100 ESA
leaning that the name of the program is VTEDS or VTPROG this works in the system MS-DOS

Thank you

flopez

Posted: Sat Jun 17, 2006 12:09 pm
by PLC_ITA
HELLO Flopes, i have uploaded a old vt software. I dont know, if this sw it's ok for vt100.
I have also anther software for VT100 for Dos, but this VT100 is supplied from EFA automation , not ESA.
If you need also this , please sand a request message.

Enjoy

link

Link_is_Dead :(/files/23306677/VT-ESA.ZIP.html

VTProg per VT100

Posted: Sat Jun 17, 2006 1:41 pm
by flopez
Hello PLC_ITA at once mine thank you, for you have facilitated the download of the program.
I inform that this is working very well.

Italiano

Ciao PLC_ITA subito i miei La ringraziano, per Lei ha facilitato lo scarichi del programma.
Io informo che questo sta funzionando molto bene.


Cumprimentos

Flopez (hihihihihi)

Posted: Tue Jun 20, 2006 1:12 am
by hardy
thank you, very very much!
Hardy

Posted: Thu Sep 20, 2007 6:56 am
by kemal4551
"Link_is_Dead :(/files/23306677/VT-ESA.ZIP.html" is deleted. Can you re-upload.

Best regards

Link VTProg_ESA for MS-DOS

Posted: Thu Sep 20, 2007 9:55 pm
by Link

Posted: Fri Sep 21, 2007 10:16 am
by kemal4551
Thank you very much flopez. But I could not install (winXP_SP2).Message is"Not legal path C:\Vtprog..."
How can i install vtprog

Best regards

Posted: Fri Sep 21, 2007 11:15 am
by flopez
kemal4551 wrote:Thank you very much flopez. But I could not install (winXP_SP2).Message is"Not legal path C:\Vtprog..."
How can i install vtprog

Best regards
The Prog. VTProg of the ESA alone functions in Operative System MSDOS 6.20 or 6.22

I go to verify if other Prog. of the ESA that works in the environment of the Windows if it has drivers for the panel that you relate

Flopez

Posted: Mon Sep 24, 2007 8:07 am
by kemal4551
Hi
Flopez I installed the program (VT-EDS) thanks now I repuire VT <=> PC programming cabels schema for vt420 and vt600. Can you share if you have it.

Best regards.

cable VT100---PC

Posted: Mon Sep 24, 2007 9:20 pm
by flopez
kemal4551 wrote:Hi
Flopez I installed the program (VT-EDS) thanks now I repuire VT <=> PC programming cabels schema for vt420 and vt600. Can you share if you have it.

Best regards.
DB 25 MALE -----VT100 ---VT420?? DB9 FEMALE RS232 PC

2---------------------------------------------2
3---------------------------------------------3
7  ----┐---------------------------------------5
25 ---┘                                  ┌----------4
4--┐                                      └----------6
5--┘                           ┌-------------------7
15--┐                         └-------------------8
18--┘
malha-------------------------------------malha

Posted: Tue Sep 25, 2007 10:03 am
by kemal4551
Thanks in advance

vt600 program menu missing

Posted: Wed May 13, 2009 4:54 am
by MAURICIO
Hi,

Thanks for VTEDS uploading but I have a problem,
I need to connect to a VT600,
I installed succesfully VTEDS
but when opening VT600 programing menu it tells
"not installed".

Every HMI programing menus till VT500 series works, just VT600 is missing,
Are there any complement or aditonal disk?
Could you help me? Thanks in advance

Posted: Tue Oct 13, 2009 4:30 pm
by Alpilles
It's the same for me.
I have to work with a VT601 and this VTDES not including this option.
Is someone with the VTDES including the VT600 option ?
Thanks.

Re: [LINK]: OLD VT100 ESA

Posted: Wed Dec 30, 2009 10:39 am
by warbuff08
Hi Guys,

I would just like to ask help on how to successfully install the VTPROG software in my system. I will be trying to read an existing ESA program for a VT100 panel. First, I have downloaded the VTPROG installation files using the rapidshare link posted then I tried to extract all of them. After that, I install it under Windows XP SP 3 OS using DOSBOX emulator but I am always encountering an error "Not Legal Path C:\VTPROG". Would you be so kind to send me a procedure that I can follow to successfully install it? That would be very very very helpful.

Many Thanks and Happy New Year to Everyone!

Re: [LINK]: OLD VT100 ESA

Posted: Thu Dec 31, 2009 12:21 am
by flopez
Hello, for you to have good success with the program installation, you'll need to install the PC in MSDOS 6.0 or 6.22, as with the MSDOS emulator Windos XP this program does not work.

flopez

Re: [LINK]: OLD VT100 ESA (for MS-DOS only)

Posted: Wed Jul 28, 2010 3:00 am
by c0den
Hi there,
I´m looking for EFA Automazione FLY 55 - FLY 240 programming software, does anyone have it?

Many thanks.

c0den.

Re: [LINK]: OLD VT100 ESA (for MS-DOS only)

Posted: Wed May 18, 2011 10:57 am
by francojd
I have the same problem with installing. So this program only works with DOS 6 or 6.22 not through DOS BOX?

Re: [LINK]: OLD VT100 ESA (for MS-DOS only)

Posted: Thu May 19, 2011 6:24 pm
by francojd
I tried the install from dosbox and dos 6.22 but still run into to same error! Please help me anyone with what you learned on how to configure the install. I believe I may not have the .bat file corect or something else becouse I get the path error or if I try to launch an old created program it gives me an ERROR "File VT400.INI not enabled."

Re: [LINK]: OLD VT100 ESA (for MS-DOS only)

Posted: Mon Apr 28, 2014 12:50 pm
by mick_de
Hi Guys,
Link_is_Dead :(/VTProg_ESA.zip is deleted. Can you re-upload.
I need to connect to a VT520G
Could you help me? Thanks in advance
Mick

Re: [LINK]: OLD VT100 ESA (for MS-DOS only)

Posted: Thu May 29, 2014 9:30 pm
by javierde22
Can you re-upload please?