LS XG5000 Password

[Melad]

Hello,
Can anyone please help me how to open a program in XG5000 software of LS PLC, the program is protected with a password which is unfortunately forgotten.
Thank you

[jetuaime81]

Send the project file so somebody can try

[Melad]

Please tell me how to attach the program file here. I can't find the attach button.
TAHANKS

[jetuaime81]

you can use mediafire.com.. or google drive link.. upload it and then give the link

[Melad]

Kindly you will find the program on http://www.mediafire.com/file/gwb91u1x6 ... .xgwx/file
Thank you

[Toms]

Enjoy 1021102

[Melad]

Thank you very much Mr. Tomas, the password you sent is OK, I can open the file
Perfect

[capow]

MR TOMS
CAN YOU HELP ME TO UNLOCK THIS FILE
http://www.mediafire.com/file/cagr7rc3x ... .xgwx/file

[capow]

can any one help me pls
to get the pw of my file

[mrcoolkerala]

@Tomas

Can you please provide the password for the attached file. The function blocks are locked

[Toms]

see PM

[tkfei]

Hi. can any one try to unlock the function block that is locked? Thank you.

[dipesh1410]

810529

[tkfei]

Thank you very much.

[ibmacer]

MR TOMS
CAN YOU HELP ME TO UNLOCK THIS FILE
http://www.mediafire.com/file/cagr7rc3x ... .xgwx/file

26062606

[vaibhavgupta]

Hi
i need help i forgot my LS PLC program password.
My PLC model number is XBC DR40SU.
Anyone please help me.

[rmodesto76]

Hello everyone,

Unfortunatelly I forgot where I wrote the password. I would like to ask your help if it is possible to you try to discover the password

https://drive.google.com/file/d/1W7HHfY ... drive_link

I would like to thank you in advance.

[dipesh1410]

Password: 12344321

Thanks...

[Saweed]

Hello dear supporter
We have a LS plc CPU h. And it has password. The man who set password is not available and we have program but we haven't profibus and Ethernet program. Now we want password to backup its profibus program and when we want connect it want password. Can anyone help us how to know password or break it?

[ford01]

Hello dear engineers
I ran into a problem communicating with the PLC
When I want to connect, it asks me for a password and I don't have it
I don't have a backup file either
Can anyone help me?
The powder packaging machine is from Seyhan company
I would really appreciate it

[ford01]

MY PLC IS LS XGB AND MODEL IS XBC-DN64H ..... V3.20

https://ibb.co/rMJ9j5x
https://ibb.co/pyPS6HL
https://ibb.co/rMJ9j5x
https://ibb.co/pyPS6HL

[Khoadanh]

Hello everyone,
Can anyone please help me how to open a program in XG5000 software of LS PLC, the program is protected with a password which is unfortunately forgotten.
Thank you

Link of project:
https://drive.google.com/file/d/1z7qxJp ... p=drivesdk

[Toms]

Password:HOLD610M
This will help you, think of other password

[ndawer83]

I have a PLC XGB XBM- DN32 S I tried to upload it turned out to be protected, how is the solution to find out the PLC Password?

[holder7]

hello, good morning, thankyou for your attetion.
i have a PLC LS XGK-CPUE that have password protected.
can any one help me to read the password
thanks

[bjyou1]

I have a PLC XGB XBM- DN32 S I tried to upload it turned out to be protected, how is the solution to find out the PLC Password?

If you look at the right side of the CPU, the version is marked on the label.
Please tell me the version.
If it's 3.30 or less, it's possible with a remote team viewer.

[bjyou1]

I have a PLC XGB XBM- DN32 S I tried to upload it turned out to be protected, how is the solution to find out the PLC Password?

WhatsApp +82 1O-3O57-456O