CPU 113 03 and Nom211 00(Modbus plus)
Posted: Tue Dec 04, 2018 8:05 am
Добрый день.имеется PLC CPU 113 03(адрес 10) который подключен к сети 1 modbus plus так же имеется модуль Nom211 00(адрес 3) который подключен кo 2 modbus plus сети.Вопрос как при данной конфигурации попасть из одной сети в другую.Например к Nom211 00 подключена сенсорная панелька(адрес 5),А к CPU 113 03 подключен частотный преобразователь(адрес 18) , как считать регистры с частотного преобразователя который находится в 1й сети modbus plus?? пробовал указывать маршрут 3.10.18 но связаться так и не удалось.Может кто-то силен в этой теме.Надеюсь на вашу помощь
---------
Good afternoon.there is a PLC CPU 113 03 (address 10) which is connected to the network 1 modbus plus there is also a module Nom211 00(address 3) which is connected to 2 modbus plus network.The question as at this configuration to get from one network to another.For example,Nom211 00 is connected to the touch panel(address 5), and CPU 113 03 is connected to the frequency Converter(address 18), how to read the registers from the frequency Converter which is in the 1st network modbus plus?? tried to specify a route 3.10.18 but it was not possible to contact.Can someone strong in this topic.Hope for your help
---------
Good afternoon.there is a PLC CPU 113 03 (address 10) which is connected to the network 1 modbus plus there is also a module Nom211 00(address 3) which is connected to 2 modbus plus network.The question as at this configuration to get from one network to another.For example,Nom211 00 is connected to the touch panel(address 5), and CPU 113 03 is connected to the frequency Converter(address 18), how to read the registers from the frequency Converter which is in the 1st network modbus plus?? tried to specify a route 3.10.18 but it was not possible to contact.Can someone strong in this topic.Hope for your help