Mitsubishi FX3U+ENET module configuration

другие контроллеры
Post Reply
jojoc
Posts: 6
Joined: Mon Feb 24, 2014 6:00 pm

Mitsubishi FX3U+ENET module configuration

Post by jojoc » Mon Feb 24, 2014 6:29 pm

Hello all,
I have got problem with my ENET module. Generally, I want to get this effect:

http://www.youtube.com/watch?v=-_Itjr-tKFE

It is Modbus Droid, an android application which can connent with PLC (by modbus i think ;p). My knowledge about PLC's, protocols etc. is not large, so I please your understanding.

Somewhere i found tutorial how to configure ENET module, but author used port 5551. It worked good, I could send ladder to PLC, but i can't connect with Modbus Droid app. Later i foud informiaton that is special dedicated port, and only GX Developer and mitsubishi devices use it. I also found information that ENET blocks (?) ports under 1024. This explains why men on the movie use port 1025 (not 502 modbus port). So i think its possible to do, but i need to know how to configure this module correctly.

I will be greatful for all the tips. Greetings

Oldman
Posts: 797
Joined: Tue Aug 21, 2007 7:05 am

Re: Mitsubishi FX3U+ENET module configuration

Post by Oldman » Tue Feb 25, 2014 4:49 am

the FX3U-ENET-P502 block is necessary

jojoc
Posts: 6
Joined: Mon Feb 24, 2014 6:00 pm

Re: Mitsubishi FX3U+ENET module configuration

Post by jojoc » Tue Feb 25, 2014 9:24 am

Are you sure? Man on the movie use port 1025, not 502...

Oldman
Posts: 797
Joined: Tue Aug 21, 2007 7:05 am

Re: Mitsubishi FX3U+ENET module configuration

Post by Oldman » Tue Feb 25, 2014 1:15 pm

I did such much earlier that person.read manuals

jojoc
Posts: 6
Joined: Mon Feb 24, 2014 6:00 pm

Re: Mitsubishi FX3U+ENET module configuration

Post by jojoc » Sat Mar 01, 2014 8:02 pm

With all respect You are wrong. I used special function block in gx works 2 and everything works great. Greetings

Oldman
Posts: 797
Joined: Tue Aug 21, 2007 7:05 am

Re: Mitsubishi FX3U+ENET module configuration

Post by Oldman » Sun Mar 02, 2014 3:40 am

fine.why then you ask questions

jojoc
Posts: 6
Joined: Mon Feb 24, 2014 6:00 pm

Re: Mitsubishi FX3U+ENET module configuration

Post by jojoc » Sun Mar 02, 2014 9:10 am

I found it yesterday. Maybe someone will have the same problem in future

Post Reply