PLCforum.uz.ua

Hello All,

Please, I need Control Builder Plus PS501 V2.1 Or V2.2



Best Regards

CB PS501 V2.1: viewtopic.php?f=43&t=16336
I have CB PS501 V2.2 too, but due to space limitations can't upload it on 4shared at the moment.

Thank you very much , V2.2 version would be interesting when you can

regards.

does the files @ 4share.com,
http://www.4shared.com/folder/2gZFbac8/ ... ntrol.html

is the PS501 control builder plus V2.2 ??

I need the new version of v2.2,
thanks Linkinx64.

azhw wrote:the files @ 4share.com,
http://www.4shared.com/folder/2gZFbac8/ ... ntrol.html

is the

..."Scalable PLC AC500 and Control Builder PS501" basic training.
I will upload V2.2 as soon as I upgrade account. No space now. Sure as an option can upload on another file storage server... but this is complicates link tracking for me. Link is dead - I can't see it.

Thank Linkinx64!

waiting for your good news.

Uploading V2.2...

great news! Thanks for uploading...

I'm downloading it now...

ps:
1. this time it's an ISO file, great! Not as v2.1, so many files...
2. wait uploading finished completely,
and need the unrar password~~

PS501 Control Builder AC500 V2.2 links:
http://www.filefactory.com/file/1utf8vd ... .part1.rar
http://www.filefactory.com/file/70081dk ... .part2.rar
http://www.filefactory.com/file/3k6a1x4 ... .part3.rar
http://www.filefactory.com/file/4ux84xl ... .part4.rar

I have downloaded,

I like the origin ISO image, not all file copied from CD.

As told as Linkinx64, this time it has more files, the capacity is 870M!
maybe not a CD image,
It's a DVD image.

Thank Linkinx64, again!

Thank you for [Link]

Anh I have a problem .

When I finished PS501 V2.2 and I couldn't config profibus on Codesys .

I know ABB Sycon.net use config profibus but can't open it because it requires password

Thank for your assistant

ngongpro27 wrote: know ABB Sycon.net use config profibus but can't open it because it requires password

Sycon.net not using for Profibus configuration since PS 501 CB AC 500 V2.0. Use ABB Configurator instead.
What kind of password you are talking about? Make printscreen.

Thank Linkinx64 so much

and I have a question . How can i config ACS550 drives into profibus .?

In brief:
Download user's manual for ACS550 from ABB.
It is necessary to know MSW and MCW structure before config something.
Add device for CM572-DP in your PS501 project and specify .gsd file for the RPBA-01.
(Here you can download that gsd: https://hotfile.com/dl/179206600/8ac440 ... 2.zip.html )
Later in the programming window use ParGet/ParSet function blocks to config the drive.

It would be better if you read AC500 and ACS550 trainings before start work with the drive and Control Builder.

Thank Linkinx64

i know that
PZD1 IN: Status word
PZD2 IN: Actual speed
PZD1 OUT: Control word
PZD2 OUT: Reference speed
PZD3,PZD4... options
Ex : I Config in DP-Module I/O Mappping
Input1
Channel Address
StatusWord Word0 %IW1.4
ACT_Speed Word1 %IW1.5
....
Output1
ControlWord Word0 %QW1.4
...
but i don't know address how to send or receive ControlWord(Word0) --> PZD1 OUT( in PS501)
and PZD1(AC500)--> ControlWord(ACS550 Drives).
and can i change address of them ?
thanks

You can change RPBA address in the "DP-Parameters".
For sending/receiving data you must declare variable in the "DP-Module I/O Mapping". For example: declare ACS550_VAR (WORD type) for %QW1.4. Later connect it in your program.

Thanks
I have configured AC500 profibus to ACS550 & ACS850.

Anyone has link for download: Drive Studio V1.5 ?

Thank you

I downloaded the Control Builder Plus V2.2 and try to extract but one problem occur though I coppied exactly the unrar password.

Extracting file: E:\ABB PLC\ps501_control_builder_ac500_v2.2_build226.part01.rar
Extracting to "C:\Documents and Settings\VNNGTRA\Desktop\"
Use Path: yes Overlay Files: no
Extracting PS501_V22_RELEASE__Build226.iso Error: CRC mismatch in file "PS501_V22_RELEASE__Build226.iso" in the archive "E:\ABB PLC\ps501_control_builder_ac500_v2.2_build226.part01.rar" - possible wrong password

Please kindly help!

Thanks!

Hi Linkinx64,

Please kindly help.I can not extract the Zip file with the password :plcforum.uz.ua

Thanks Linkinx64

ngongpro27 wrote:Anyone has link for download: Drive Studio V1.5 ?

viewtopic.php?f=16&t=17091

vnnghia_bk wrote:Please kindly help.I can not extract the Zip file with the password :plcforum.uz.ua

In fact, it is RAR, not ZIP.


Password: plcforum.uz.ua (without colon)
If not success - redownload and try again!

thanks Linkinx64.Just check again.The 3rd file is not enough capacity so i dont know why.Will download again.

Thanks Linkinx64 for your help with CB v2.2. Maybe you have v2.3 (need for ACS880 drive) or you know how to upgrade the old one?

At the moment I don't have a stable 2.3 version of AC500 Control Builder (only beta version). When I get stable 2.3 version I'll let you know (I need it too).

Have good news?

As good as your internet bandwidth:
http://www.filefactory.com/file/1n50dak ... part01.rar
http://www.filefactory.com/file/4h510p5 ... part02.rar
http://www.filefactory.com/file/51kuuc5 ... part03.rar
http://www.filefactory.com/file/3wmdboj ... part04.rar
http://www.filefactory.com/file/j6ko9ub ... part05.rar
http://www.filefactory.com/file/q9imdys ... part06.rar
http://www.filefactory.com/file/422ca3d ... part07.rar
http://www.filefactory.com/file/3x4tcs0 ... part08.rar
http://www.filefactory.com/file/3oqu8qs ... part09.rar
http://www.filefactory.com/file/2lmwg7e ... part10.rar
http://www.filefactory.com/file/36i6624 ... part11.rar
http://www.filefactory.com/file/7h8eqyp ... part12.rar
http://www.filefactory.com/file/4i34dof ... part13.rar
http://www.filefactory.com/file/5jmcmzm ... part14.rar
http://www.filefactory.com/file/18kntyv ... part15.rar
http://www.filefactory.com/file/6mgseqs ... part16.rar
http://www.filefactory.com/file/colm52a ... part17.rar
http://www.filefactory.com/file/5cfr2xj ... part18.rar
http://www.filefactory.com/file/4nsw6fw ... part19.rar

Burn archive content to the DVD image or mount to the virtual drive.
Run start_menu.exe. Select "Installation" - "Customized installation" and choose "PLC - AC500" from the selection page. "Safety PLC AC500-S" and "OPC Server" are optional.

Thank you very much for such present.

Linkinx64 wrote:As good as your internet bandwidth...

It took me about eight hours to download and install all =).

There should be a problem with parts 15 and 16. Could you re-upload?
Thank you

Hi Linkinx64,
Could you please upload to 4shared.com?
Filefactory quite hard for downloading.
Thanks.

There should be a problem with parts 6. posting.php?mode=reply&f=3&t=18118#
Could you re-upload?posting.php?mode=reply&f=3&t=18118#
Thank you

There should be a problem with parts 6. posting.php?mode=reply&f=3&t=18118#
Could you re-upload?posting.php?mode=reply&f=3&t=18118#
Thank you

http://www.filefactory.com/file/q9imdys ... part06.rar

no funcion

There should be a problem with parts 6

Could anyone upload the file #3 again?

thanks

no funcion Automation_Builder_1.0.part06

thank you very much

Hello all!
I need Control Builder Plus PS501 V2.2 or higher!

Old links doesn't work.

Please, kindly help!

Thanks!

Hi guys

News?

I need to make a change to an ABB CLP AC500 PM564
But I need the software Control Builder Plus v2.2.x or v2.3.x

Automation Builder would also be useful;

Do you know where to find it?

These links are not working please upload new link

All links to Control builder died (((

Hi
I can't download any file
please give a link in Mega sits or google drive

Добрый день. Все ссылки на Control Builder не действительны! Где можно скачать, подскажите пожалуйста.