Request: Proficy ME 5.5 or 5.6 (or both)

другие контроллеры
Post Reply
Str3atWarrior
Posts: 33
Joined: Fri Jul 03, 2009 8:12 pm
Location: America

Request: Proficy ME 5.5 or 5.6 (or both)

Post by Str3atWarrior » Sat Feb 06, 2010 7:14 pm

Hi,

If someone have a copy of Proficy Machine Edition 5.5, or 5.6, could you please share it?

Thanks

Str3atWarrior

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

[LINKS:] Proficy ME 5.5 and 5.6

Post by Schtiel » Sat Feb 06, 2010 8:11 pm

Just wonder, why do you need these quite old versions? :?:

Proficy Machine Edition 5.5:
http://plc.net.ru/viewtopic.php?f=3&t=6186

Proficy Machine Edition 5.6:
http://plc.net.ru/viewtopic.php?f=3&t=7846

Str3atWarrior
Posts: 33
Joined: Fri Jul 03, 2009 8:12 pm
Location: America

Re: Request: Proficy ME 5.5 or 5.6 (or both)

Post by Str3atWarrior » Sat Feb 06, 2010 10:08 pm

Thanks a lot!

I needed 5.6 because a client of ours have some 90-30 that have been programmed with ME 5.6 and he doesn't want to upgrade to any other version, since he have a 5.6 license on his workstation that he use for monitoring purpose, so i wanted to install a copy of 5.6 on a laptop to be able to do troubleshooting in front of the control panel.

Str3atWarrior

Edit : I mean Machine Edition 5.6 Software installed, and GE is charging and incredibly high price to update to 6.0, and since 5.6 does the job, he doesn't want to pay up more than needed...
Last edited by Str3atWarrior on Sat Feb 06, 2010 10:14 pm, edited 1 time in total.

Str3atWarrior
Posts: 33
Joined: Fri Jul 03, 2009 8:12 pm
Location: America

Re: Request: Proficy ME 5.5 or 5.6 (or both)

Post by Str3atWarrior » Sat Feb 06, 2010 10:10 pm

The 5.6 links are dead, could someone upload it again please?

Edit : Just found new links online :

Link_is_Dead :(/P ... .part1.rar
Link_is_Dead :(/P ... .part2.rar
Link_is_Dead :(/P ... .part3.rar
Link_is_Dead :(/P ... .part4.rar
Link_is_Dead :(/P ... .part5.rar
Link_is_Dead :(/P ... .part6.rar

Not tested, downloading right now, will confirm if working soon

Str3atWarrior
Posts: 33
Joined: Fri Jul 03, 2009 8:12 pm
Location: America

Re: Request: Proficy ME 5.5 or 5.6 (or both)

Post by Str3atWarrior » Tue Feb 09, 2010 3:16 pm

The 5.6 links are good one, just burn the files and you're ready to go!

Looking for 5.5 on rapidshare, will post if i find it!

minstermann
Posts: 22
Joined: Tue Feb 23, 2010 8:00 pm

Re: Request: Proficy ME 5.5 or 5.6 (or both)

Post by minstermann » Tue Feb 23, 2010 9:25 pm

I have 5.6 also (yea, it's old) but i need a key for ME PLC and ME View (both running on same computer). Site code is ECF8-DDE2. Thanks

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: Request: Proficy ME 5.5 or 5.6 (or both)

Post by anwer shahzad » Wed Feb 24, 2010 2:41 pm

hi minstermann

you see PM

from

Anwer Shahzad

Hexados
Posts: 6
Joined: Sat Jan 26, 2019 1:02 am

Re: [LINKS:] Proficy ME 5.5 and 5.6

Post by Hexados » Mon Aug 24, 2020 7:34 pm

Schtiel wrote:
Sat Feb 06, 2010 8:11 pm
Just wonder, why do you need these quite old versions? :?:

Proficy Machine Edition 5.5:
http://plc.net.ru/viewtopic.php?f=3&t=6186

Proficy Machine Edition 5.6:
http://plc.net.ru/viewtopic.php?f=3&t=7846
This may be strange, but can you please reupload the files? The thing is that I need these versions (exactly these versions) so that I can upload/download with the version that the other technicians are using (they are external, and sometimes the machine bugs due to bad electrical flow, so another download is necessary. To avoid getting them here every single time, I wish to do it on my own, and to avoid saving the machine in another version, I need the same version which is Proficy Machine Edition 5.5

Post Reply