Page 2 of 13

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Aug 21, 2014 7:56 pm
by letranlong
ognde wrote:
letranlong wrote:
vlad2006gr wrote:letranlong , project on the memory card? Tried to intercept the exchange with the controller?
dear vlad2006
I have not project on the memory card. and also do not programs plc original. so I can't upload and download or exchange with the controller.
plaese help me
how to do exchange with the controller upload and download with controlled ?
how doing upload and download with controlled ?
Hey buddy,

Have you already used the unitelway driver to download with the correct cable and it´s not working?
You don´t have the application file correct?
dear ognde
I don't Have used the unitelway driver to download.
I Have used software twido swite version: 2.31.04 and used a wire cable TSXPCX3030-C USB 2.0 TO schneider twido series plc go to online with plc
before here, project on the plc. I created project on plc or I write program on plc
but before when I download progam to controller ( PC ==> PLC ) that time I have setting password for controller
but now when i online to controller again, this time me the forget password of (plc) controller and i am being loss program original. so i can't upload and download to controller.
when i online to controller, it's appears a box dialog the below here
twido suide and the plc applications aredifferent
immediate connection impossible
handware configuration are incompatible
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

how is upload program plc?
so I can't upload and download or exchange with the controller.
plaese help me
how upload and download with controlled ?
how to do online with controlled ?

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Aug 21, 2014 10:37 pm
by ognde
vlad2006gr wrote:ognde wrote:
Hey vlad2006gr i couldn´t download the file, would you mind send it again to me?
relink:
http://dfiles.ru/files/8i69j99vk
http://dfiles.ru/files/mxmzflrd9
or
http://www.4shared.com/rar/XuflXq0bba/b ... nlock.html
http://www.4shared.com/rar/tu5vO9Mpba/b ... nlock.html
Good luck!
Thanks bro, i will download as soon as i can open it in my computer. Thanks very much

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Aug 21, 2014 10:40 pm
by ognde
letranlong wrote:
ognde wrote:
letranlong wrote:
vlad2006gr wrote:letranlong , project on the memory card? Tried to intercept the exchange with the controller?
dear vlad2006
I have not project on the memory card. and also do not programs plc original. so I can't upload and download or exchange with the controller.
plaese help me
how to do exchange with the controller upload and download with controlled ?
how doing upload and download with controlled ?
Hey buddy,

Have you already used the unitelway driver to download with the correct cable and it´s not working?
You don´t have the application file correct?
dear ognde
I don't Have used the unitelway driver to download.
I Have used software twido swite version: 2.31.04 and used a wire cable TSXPCX3030-C USB 2.0 TO schneider twido series plc go to online with plc
before here, project on the plc. I created project on plc or I write program on plc
but before when I download progam to controller ( PC ==> PLC ) that time I have setting password for controller
but now when i online to controller again, this time me the forget password of (plc) controller and i am being loss program original. so i can't upload and download to controller.
when i online to controller, it's appears a box dialog the below here
twido suide and the plc applications aredifferent
immediate connection impossible
handware configuration are incompatible
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

how is upload program plc?
so I can't upload and download or exchange with the controller.
plaese help me
how upload and download with controlled ?
how to do online with controlled ?
Hello, i will try to make a test with a twido plc here and after i test i will try to answer it for you.

Regards

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Aug 22, 2014 3:50 pm
by letranlong
ognde wrote:
letranlong wrote:
ognde wrote:
letranlong wrote:
vlad2006gr wrote:letranlong , project on the memory card? Tried to intercept the exchange with the controller?
dear vlad2006
I have not project on the memory card. and also do not programs plc original. so I can't upload and download or exchange with the controller.
plaese help me
how to do exchange with the controller upload and download with controlled ?
how doing upload and download with controlled ?
Hey buddy,

Have you already used the unitelway driver to download with the correct cable and it´s not working?
You don´t have the application file correct?
dear ognde
I don't Have used the unitelway driver to download.
I Have used software twido swite version: 2.31.04 and used a wire cable TSXPCX3030-C USB 2.0 TO schneider twido series plc go to online with plc
before here, project on the plc. I created project on plc or I write program on plc
but before when I download progam to controller ( PC ==> PLC ) that time I have setting password for controller
but now when i online to controller again, this time me the forget password of (plc) controller and i am being loss program original. so i can't upload and download to controller.
when i online to controller, it's appears a box dialog the below here
twido suide and the plc applications aredifferent
immediate connection impossible
handware configuration are incompatible
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

how is upload program plc?
so I can't upload and download or exchange with the controller.
plaese help me
how upload and download with controlled ?
how to do online with controlled ?
Hello, i will try to make a test with a twido plc here and after i test i will try to answer it for you.

Regards
thank you very much
You are a great help.
see you soon
have a nice day
thank you again

Re: Unlock Unity Pro project

Posted: Fri Sep 12, 2014 7:08 pm
by mseena
Dear vlad2006gr, Can you help to unlock PL following the unity Pro project and DFB. https://www.sendspace.com/file/pz2x09
Thanks,
mseena

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Sun Sep 14, 2014 6:07 pm
by vlad2006gr
mseena wrote:
Dear vlad2006gr, Can you help to unlock PL following the unity Pro project and DFB
See PM.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Sep 26, 2014 3:30 pm
by la-ma
sorry. My post is not about PL-7.
But it also about Schneider...
I have a PLC Twido TWDLMDA40D. When i try to upload a project from PLC to PC there is a message to enter a password.
I can upload project but can't change anything or save application without the password.
Can anyone tell me is it possible to find the password somewere at temporary files or in memory.
i have a ladder or list view of program. Hard way is to reenter all about 400 strings of project and a lot of constants, counters, timers and etc. But i warry about the value of constants, may be some setting i don't know about ....

Вижу тема по UnitiPro разных версий, но есть вопросы и по TwidoSoft.
может кто знает или сталкивался.
Есть контроллер Twido TWDLMDA40D. Сейчас я могу к нему подключиться и считать проект. Но проект защищен паролем. Поэтому проект не могу сохранить на компьютере, не могу изменять что-либо. Не допускается копировать проект в виде листинга в другой проект.
Можно, конечно, по строкам вбить в новом проекте такую же програму. не уверен насчет других составляющих проекта: константы, счетчики, таймеры, типы входов и, возможно, еще много всяких мелочей. не начем проверить такой вариант. пробовал поискать временные файлы в директориях для дальнейшего анализа. Пока ничего не нашел.
Да, сейчас пользуюсь TwidoSoft v3.5. Может попробовать старыми версиями?

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Sat Oct 04, 2014 12:50 pm
by vlad2006gr
Я правильно понял?-
Есть контроллер Twido TWDLMDA40D. Сейчас я могу к нему подключиться и считать проект.
Т.е. проект скачивается с контроллера TWDLMDA40D, и в программе вы видите все шаги программы? Только не можите сохранить.С таким не встречался, но большинство программ, при скачивании, сохраняют в ТМР директории все файлы и потом перекидывают в заданную. Проверьте при скачивании директории для временных файлов. Возможно там будет ваш проект.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Mon Oct 06, 2014 9:10 am
by la-ma
да, все правильно.
я тоже про временные директории знал, и потому поискал в типовых папках операционной системы. Пока не нашел.
Для меня все равно есть радость. Повезло, что поставщики оставили старые версии программ в виде *.twd файлов. Они прекрасно открываются в "блокноте" и там нашел поле "pass" в открытом текстовом виде. его и ввел при считывании новой измененной версии. Совпало.
Где все таки система хранит временные файлы пока не нашел. Больше увлечен знакомством с программированием этого контроллера. Для меня это впервой. В основном Омрон или Брадлей.

Yes, I can transfer project from PLC to PC. But I can'tfind any temporary files at \AppData, \local\temp ...
But i a lucky boy. i had an old version of project from suppliers as *.twd file. It can be open as a xml file at Notepad. The password stored inside this file as a plain text.
I still interesting in to find some temporary storage for online openning project but not right now.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Oct 10, 2014 6:06 am
by vlad2006gr
Где все таки система хранит временные файлы пока не нашел.
Дело в том, что программа при сливании проекта может записывать его на диск либо без расширения, либо с другим расширением. Не *.twd. Плюс большинство программ кидают дополнительные файлы, с юзер ареа, состоянием битов и памяти, и хз еще что. Потом только программа пакует или наоборот, распаковывает в файл привычного вида. Смысл в вашем случае искать эти файлы - для определения пароля. Но раз вы его уже знаете, то нету. Разве, что для практики;) Я поступаю следующим образом: используя утилиту от сисинтерналс- Filemon.exe ищем куда программа ложит файлы, потом другой программой - Folder Find Text ищем там файлы с необходимым тектом, например паролем.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Oct 10, 2014 11:16 am
by la-ma
попробую поискать. может и утилиту поставлю.
сейчас больше увлечен/озадачен новой задачей. к контроллеру подключен управляемый пускатель с хитрым логическим контрольным модулем Tesys LUCC. Требуется разобраться с его ошибками передаваемыми по Modbus. это уже в другую тему.
Спасибо за участие.
I will try to find temporary files later.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Nov 13, 2014 3:09 am
by dian_andry_k
Dear vlad2006gr,

Can you help to unlock PL following the unity Pro project and DFB.

http://www.4shared.com/rar/p3Ysq59gce/D ... _Pass.html

Thanks,
Andry

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Mon Nov 17, 2014 8:07 pm
by vlad2006gr
This project is compiled in version 7.0 XLS.
http://www.4shared.com/rar/-d4uxPuice/D ... _Pass.html
Good luck!

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Nov 19, 2014 10:15 pm
by ridhatn
Dear vlad2006gr,

Can you help to unlock PL following the unity Pro project and DFB.

http://www.4shared.com/rar/r94PpPvgba/Documents.html

Thanks,
rida

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Nov 20, 2014 4:54 pm
by vlad2006gr

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Apr 30, 2015 8:53 am
by Pooh
0vlad2006gr добрый день !!!

Хотел просить еще раз проконсультировать о том в каких файлах следует искать пароли для версий Юнити от 7.0 и выше ? Интересует пароль на всю программу, не только на блоки. Хочу разобраться в этом вопросе с вашими подсказками.

И есть еще один вопрос по Твидо. Есть один объект на нем контроллер Твидо, программа в контроллере на карте памяти. Программа закрыта паролем и есть доступ только к функциям RUN и STOP. Пароль естественно мне неизвестен. Существует ли возможность скачать такую программу из контроллера ???

Надеюсь на помощь в этих вопросах, заранее спасибо.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Apr 30, 2015 1:39 pm
by SE_support
Pooh wrote:0vlad2006gr добрый день !!!

Хотел просить еще раз проконсультировать о том в каких файлах следует искать пароли для версий Юнити от 7.0 и выше ? Интересует пароль на всю программу, не только на блоки. Хочу разобраться в этом вопросе с вашими подсказками.
А чем не устраивает информация с первой страницы этого топика? Уже даже скриншоты с описанием даны. Влад конечно не всё рассказывает :) Есть ещё более простой способ посмотреть пароль на проект, даже если пароль не в открытом виде - кто ищет, тот найдёт.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Tue May 05, 2015 8:10 am
by Pooh
Если бы информации с первой страницы было достаточно, я бы не задавал вопросы. С первых сообщений этой ветки утекло много времени и сменилось много версий программы.
Я нашел пароль на секции программы, приблизительно там же появляется пароль и на всю программу. Но можно ли как-то вскрыть зашифрованный пароль..? (h)

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed May 06, 2015 2:20 pm
by SE_support
Pooh wrote:Если бы информации с первой страницы было достаточно, я бы не задавал вопросы. С первых сообщений этой ветки утекло много времени и сменилось много версий программы.
Я нашел пароль на секции программы, приблизительно там же появляется пароль и на всю программу. Но можно ли как-то вскрыть зашифрованный пароль..? (h)
Ну всё правильно, вы нашли где находится пароль, просто теперь пароль ещё и зашифрован. Надо всего-лишь знать как зашифрован пароль - данная инфо пока нигде не проходила, но алгоритм проще простого.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Sep 23, 2015 3:17 am
by nguyanh
Dear Vlad2006gr.

Could you please help me unlock unity pro project this file.

https://drive.google.com/file/d/0BxAlpH ... sp=sharing

Thank you very much

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Sep 23, 2015 6:28 am
by vlad2006gr
See PM.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Oct 07, 2015 5:03 am
by schutz
Hi!

I have a problem in my file with a section protected by password ... but I forgot the latter...
Can you help me ?

The link to the file: http://ovh.to/c1VXNWW

Thanks!
Jérémie

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Oct 09, 2015 3:33 pm
by vlad2006gr
In late October, I will be able to help .

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Oct 28, 2015 6:49 pm
by vlad2006gr
schutz wrote:
Hi!
I have a problem in my file with a section protected by password ... but I forgot the latter...
Can you help me ?
http://www.4shared.com/rar/LEWI48f2ce/c ... nlock.html
Good luck!

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Oct 29, 2015 6:21 am
by schutz
Thank you very much! (oo)

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Oct 30, 2015 6:03 am
by Nivin
Dear Experts,

I have seen in the forum and I have done unlock password for Unity Pro program. I use Unity Pr V.8.
My program is password protected with encryption.

After working on Hex editor this is what i get.
Header name="Project" version="0.0.559" dateTime="date_and_time#2014-12-31-14:1:49"
password="C8D8180D416C5DD4400A9655CAB64860EE30306461394E338B0610B1"
crypted="0"></contentHeader>...<commParameters>....<PLCAddress address="192.168.1.10"

How do i know the password.?

Program is available in the below link provided.
http://www.4shared.com/archive/27fE-NINce/CoGen.html

Please help.

Thanks & Regards,
Nivin
(nuser)

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Oct 30, 2015 10:33 pm
by vlad2006gr
Nivin wrote:
Dear Experts,

I have seen in the forum and I have done unlock password for Unity Pro program. I use Unity Pr V.8.
My program is password protected with encryption.
Project version 7.0
Password project- inddcc21
Password DFB- TYC31
Good luck!

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Sun Nov 01, 2015 4:12 pm
by Nivin
Dear vlad2006gr,

Thanks a ton... You make it seem so simple..
I have no words to express my gratitude.. I needed the password desperately.

How did you do it..Just to know & learn..

(oo) (tyou)

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Sun Nov 08, 2015 9:34 am
by gameover123
Dear vlad2006gr

please help me to unlock the program. Our contractor locked the project and refuse to give password .
i know the password for station.apx but unable to find password for DFBs.
PM password please.
Uploaded Locked Files:
5-11-15.rar

Thanks

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Sun Nov 08, 2015 5:00 pm
by gameover123
Thanks vlad2006gr.
You are great.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Dec 09, 2015 9:23 pm
by Arnaud1
Hello,

I need help with a password. This password is crypted and i don't unprotected DBF...

The project is uploaded at :
https://1fichier.com/?2ednslp5hf

Thank you in advance for your time.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Dec 10, 2015 5:07 am
by vlad2006gr
Arnaud1 wrote:Arnaud1 » Чт дек 10, 2015 12:23 am

Hello,

I need help with a password. This password is crypted and i don't unprotected DBF...
??????
In the project there is no password!

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Dec 10, 2015 8:23 am
by Arnaud1
Hello,
thanks for your answer. I am very stupid, i take many project for testing and it's the bad project uploaded.
http://up.lbzh.fr/uploads/566935f3e0643.stx
Thanks for your time and your help.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Dec 11, 2015 10:36 am
by vlad2006gr
Arnaud1 wrote:Arnaud1 » Чт дек 10, 2015 11:23 am

Hello,
thanks for your answer. I am very stupid, i take many project for testing and it's the bad project uploaded.
No password:
http://up.lbzh.fr/uploads/566aa6a860605.rar
Good luck!

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Sat Dec 12, 2015 8:30 am
by Arnaud1
Thank you very much. I will test it monday.
Can you explain to me how are you did it ?
Only software or with hardware ?

Мои искренние благодарности.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Sat Dec 12, 2015 12:39 pm
by vlad2006gr
Arnaud1 wrote: Arnaud1 » Сб дек 12, 2015 11:30 am

Thank you very much. I will test it monday.
Can you explain to me how are you did it ?
Only software or with hardware ?
Only software and reversing. Do not forget to rename the file.
Good luck!

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Mon Dec 14, 2015 9:56 pm
by Arnaud1
THANK YOU VERY MUCH MISTER VLAD2006GR...

Can you make a tutorial with an example ? I think you're the best to make it.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Mon Dec 14, 2015 10:36 pm
by onderatsan
Hello Master VLAD2006GR.
I need your help.
Can You open attached projects DFB? (Program - Tasks - Mast - Sections.. Everything Locked)
and say to me what is passwords?

PLC1 Project;
https://www.dropbox.com/s/19o2kaqkvhrcf4q/PLC1.rar?dl=0

PLC2 Project;
https://www.dropbox.com/s/57pd74905ibwg7b/PLC2.rar?dl=0

With Best Regards.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Tue Dec 15, 2015 8:42 pm
by vlad2006gr
onderatsan wrote:Hello Master VLAD2006GR.
I need your help.
See PM.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Tue Dec 15, 2015 9:20 pm
by onderatsan
Thank You very much Master.
Can You tell me, what was password / passwords? if possible.


With Best Regards.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Dec 16, 2015 6:36 pm
by vlad2006gr
The password has been encrypted. Decoding was not in the password.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Apr 15, 2016 10:43 am
by houssamatif
dear vlad2006gr;

can you help me to unlock this project:

https://drive.google.com/open?id=0B7hg9 ... TNxUklZWXM

thank you

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Apr 15, 2016 11:14 am
by vlad2006gr
houssamatif wrote:can you help me to unlock this project:

https://drive.google.com/open?id=0B7hg9 ... TNxUklZWXM
password 198508
Good luck!

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Apr 15, 2016 2:17 pm
by houssamatif
thank you so much
it's very helpful
you are amazing !!!!!

(clap) (clap) (clap) (clap) (clap) (clap)

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Fri Apr 15, 2016 4:00 pm
by letranlong
letranlong wrote:
ognde wrote:
letranlong wrote:
vlad2006gr wrote:letranlong , project on the memory card? Tried to intercept the exchange with the controller?
dear vlad2006
I have not project on the memory card. and also do not programs plc original. so I can't upload and download or exchange with the controller.
plaese help me
how to do exchange with the controller upload and download with controlled ?
how doing upload and download with controlled ?
Hey buddy,

Have you already used the unitelway driver to download with the correct cable and it´s not working?
You don´t have the application file correct?
dear ognde
I don't Have used the unitelway driver to download.
I Have used software twido swite version: 2.31.04 and used a wire cable TSXPCX3030-C USB 2.0 TO schneider twido series plc go to online with plc
before here, project on the plc. I created project on plc or I write program on plc
but before when I download progam to controller ( PC ==> PLC ) that time I have setting password for controller
but now when i online to controller again, this time me the forget password of (plc) controller and i am being loss program original. so i can't upload and download to controller.
when i online to controller, it's appears a box dialog the below here
twido suide and the plc applications aredifferent
immediate connection impossible
handware configuration are incompatible
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

how is upload program plc?
so I can't upload and download or exchange with the controller.
plaese help me
how upload and download with controlled ?
how to do online with controlled ?
dear everybody
please help me

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Tue Jun 28, 2016 1:34 pm
by alik-sobaka
Уважаемый Влад возможно вы мне сможете помочь? Часто возникают вопросы со станком, иногда причину проблемы приходится долго искать
https://drive.google.com/open?id=0B6Nle ... 01FM0ZUcVk
https://drive.google.com/file/d/0B6Nleu ... sp=sharing
Премного благодарен.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Jul 06, 2016 6:31 pm
by vlad2006gr
alik-sobaka wrote:Уважаемый Влад возможно вы мне сможете помочь?

See pm.
Good luck!

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Wed Jul 06, 2016 7:20 pm
by vlad2006gr
letranlong wrote:PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden
Тут напишу по русски. В Pl7 и в Unity после компиляции программы образуется образ для загрузки в карту памяти BinAppli (это если программу *.stu открыть в винраре она будет видна) . Если из карты памяти контролера через кардридер скачать программу, так это и будет BinAppli , только преобразованный.В Unity можно открыть программу любой версии. Переименовать файл *.STU в *.STA, и он откроется. Но конечно не будет DTM. Так вот в *.STA файле и находится этот BinAppli.
Я достал карту из запароленого (PLC ==> PC transfer is forbidden), скачал через кардридер ноутбука. Преобразовал в BinAppli , вставил в *.STA и открыл в Unity. Но вообще работа трудная.

In Pl7 and in Unity program after compiling formed image to boot to BinAppli memory card (if it is a program * .stu open vinrar it will be visible). If the memory controller via a card reader to download maps, so it will be BinAppli, only Unity preobrazovannyy.V can open any version of the program. Rename the file to * .STU * .STA, and it will open. But of course there will be the DTM. So in * .STA file and this is BinAppli.
I got a card from the password-protected (PLC ==> PC transfer is forbidden), downloaded through a laptop card reader. I convert to BinAppli, put in * .STA and opened in Unity. But in general the work difficult.

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Jul 07, 2016 6:47 am
by SE_support
Vlad2006gr,

тебе пора уже свой бизнес открывать по подбору паролей :)

Ты пишешь "Преобразовал в BinAppli , вставил в *.STA и открыл в Unity. Но вообще работа трудная. " - что ты имеешь ввиду под "преобразовал"?

И ещё вопрос - ты уже научился находить "закодированный" пароль от Unity проектов?

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Posted: Thu Jul 07, 2016 7:09 am
by vlad2006gr
Преобразовал это то,что файл BinAppli и скаченный с карты как бы сегментированный. Сегмегнты в обоих файлах одинаковы, но находятся в разных местах. Поэтому их нужно переставить.
SE_support wrote: ещё вопрос - ты уже научился находить "закодированный" пароль от Unity проектов?
Ну про это я говорить не хочу.