[?]: Unprotect Schneider PL7-Pro DFBs

другие контроллеры
Post Reply
wisely77
Posts: 2
Joined: Mon Aug 10, 2015 4:03 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by wisely77 » Thu May 28, 2020 9:45 am

hi,

can someone help to check this password.

http://www.mediafire.com/file/b0m3486hq ... 5.stu/file

thanks in advance.

Toms
Posts: 170
Joined: Sat Oct 26, 2019 5:56 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by Toms » Thu May 28, 2020 1:30 pm

Enjoy 9212

atsaliaris
Posts: 1
Joined: Fri Jun 19, 2020 10:32 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by atsaliaris » Fri Jun 19, 2020 11:35 pm

Hello guys!! Please i need a help with a project from Modicon M340. Some blocks DFB are locked in the project with names ALM, GOV and one-two more,have different password so i cannot read it. I read all the messages in this thread and i managed to find the password of the total project that was 2000 in file pathbase.db

my project is here: https://wetransfer.com/downloads/d01657 ... 453/b9e084

Any help will be appreciated... (wow)

benico
Posts: 1
Joined: Sun Jun 21, 2020 2:27 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by benico » Sun Jun 21, 2020 3:31 am

Hi,

I tried to find with your method, but I can't find the password to unlock my DFB. :?
Can you please help me to open them ?
http://www.mediafire.com/file/61sml6rsd ... t.stu/file

Thank you for your help.
Ben

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by vlad2006gr » Mon Jun 22, 2020 1:18 pm

benico wrote:
Sun Jun 21, 2020 3:31 am
tried to find with your method, but I can't find the password to unlock my DFB.
See PM
atsaliaris wrote:
Fri Jun 19, 2020 11:35 pm
Hello guys!! Please i need a help with a project from Modicon M340.
See PM.

gabeirinhas
Posts: 7
Joined: Wed Jul 08, 2020 7:25 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by gabeirinhas » Wed Jul 08, 2020 8:07 am

Good morning, I have a project with plc M340.
The plc is recycled, and I would appreciate it if you could help me unlock the project to gain access.
I would be very grateful thanks. The project is as follows.

https://www.mediafire.com/file/l2jw2q81 ... o.stu/file

https://www.mediafire.com/file/7blgrzdx ... o.ztx/file

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by vlad2006gr » Wed Jul 08, 2020 1:36 pm

see PM

gabeirinhas
Posts: 7
Joined: Wed Jul 08, 2020 7:25 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by gabeirinhas » Wed Jul 08, 2020 2:13 pm

Sorry, but the password you gave me, the program tells me that it is not correct. Could you review it please.
Thank u.

gabeirinhas
Posts: 7
Joined: Wed Jul 08, 2020 7:25 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by gabeirinhas » Thu Jul 09, 2020 9:37 am

wow, u re the best... love u guy

svladimir
Posts: 2
Joined: Fri Jul 10, 2020 8:10 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by svladimir » Fri Jul 17, 2020 1:42 am

помогите плиз с паролем для DFB
https://drive.google.com/file/d/1lFhAkI ... p=drivesdk

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by vlad2006gr » Mon Jul 20, 2020 8:45 am

svladimir wrote:
Fri Jul 17, 2020 1:42 am
А так работает?
смотрите ПМ

svladimir
Posts: 2
Joined: Fri Jul 10, 2020 8:10 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by svladimir » Mon Jul 20, 2020 12:41 pm

Спасибо огромное!

anshadh
Posts: 1
Joined: Tue Sep 01, 2020 1:03 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by anshadh » Tue Sep 01, 2020 1:29 pm

can someone help me find the password for two programs? This is the M580 project. protection in the DFB's.

https://we.tl/t-cstjRK93AX

darkside
Posts: 1
Joined: Thu Sep 03, 2020 2:58 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by darkside » Thu Sep 03, 2020 3:07 am

Hi all!
I have a program of schneider PLC with locked section at: Derived FB types/pumpcontrol/
So many thanks if anyone can find the password of that section!!! (pgood)
https://drive.google.com/file/d/1IrTZeG ... sp=sharing
(oo)

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by vlad2006gr » Thu Sep 03, 2020 6:14 am

darkside wrote:
Thu Sep 03, 2020 3:07 am
I have a program of schneider PLC with locked section at: Derived FB types/pumpcontrol/
See PM
anshadh wrote:
Tue Sep 01, 2020 1:29 pm
This is the M580 project. protection in the DFB's.
See PM

bio_john
Posts: 1
Joined: Sat Sep 12, 2020 10:29 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by bio_john » Sat Sep 12, 2020 10:36 am

Здравствуйте. Помогите пожалуйста с паролем от DFB блока (oo)
https://yadi.sk/d/KMVALRSKYYlUnA?w=1

Tintin
Posts: 6
Joined: Sun Mar 29, 2020 10:25 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by Tintin » Sat Sep 19, 2020 6:25 am

Hell, I have a Schneider programme with password locked dfb blocks. Is there any way to find it?
Sincerely

DASSO
Posts: 2
Joined: Wed Feb 06, 2013 9:48 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by DASSO » Wed Sep 23, 2020 5:48 pm

hello

Could you help me. please unlock this M340 Program.

https://mega.nz/file/JChTSSbR#3ihHtDbcS ... vq-eCds9Uk

Thank you

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by vlad2006gr » Tue Oct 20, 2020 4:56 pm

DASSO wrote:
Wed Sep 23, 2020 5:48 pm
Could you help me
See PM

ivosoft
Posts: 2
Joined: Tue Oct 20, 2020 10:58 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by ivosoft » Tue Oct 20, 2020 11:06 pm

Hello!

Could you help me to! please unlock (get password) FB in this programm.

https://cloud.mail.ru/public/2kvJ/2SEy5qEVa

Thank you

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by vlad2006gr » Wed Oct 21, 2020 10:52 am

ivosoft wrote:
Tue Oct 20, 2020 11:06 pm
Could you help me to!
See PM

babikarain
Posts: 2
Joined: Sun Sep 06, 2015 5:04 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by babikarain » Wed Oct 21, 2020 3:59 pm

Could you help me too! please unlock (get password) FB in this programm.Thanks man :D

http://www.mediafire.com/file/7b1728inh ... m.rar/file

ivosoft
Posts: 2
Joined: Tue Oct 20, 2020 10:58 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by ivosoft » Wed Oct 21, 2020 6:08 pm

Дякую, Влад!

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by vlad2006gr » Thu Oct 22, 2020 1:32 pm

babikarain wrote:
Wed Oct 21, 2020 3:59 pm
Could you help me too!
See PM

happyjer
Posts: 1
Joined: Thu Nov 12, 2020 4:16 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by happyjer » Thu Nov 12, 2020 4:22 pm

hello, someone can unprotect this project for me? thanks a lot!
https://we.tl/t-18xlahlSYo

JAntunes86
Posts: 1
Joined: Mon Sep 09, 2019 9:19 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by JAntunes86 » Wed Nov 25, 2020 11:24 pm

hello,

It´s possible to unlock unity 12/13 and ecostruxure V14 DFB ?

Thanks in advance. (tyou)

Toms
Posts: 170
Joined: Sat Oct 26, 2019 5:56 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by Toms » Thu Nov 26, 2020 4:30 pm

happyjer wrote:
Thu Nov 12, 2020 4:22 pm
hello, someone can unprotect this project for me? thanks a lot!
https://we.tl/t-18xlahlSYo
Which version of the software do I need to open to open the program you released?

SE_support
Posts: 101
Joined: Thu Aug 29, 2013 4:11 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by SE_support » Fri Nov 27, 2020 2:48 pm

Pl7 Pro v4.5 SP5 - what else :)
Image

Toms
Posts: 170
Joined: Sat Oct 26, 2019 5:56 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by Toms » Fri Nov 27, 2020 11:00 pm

:D :D :D You can open it, you can give him a password (pgood) (pgood) (pgood)

SE_support
Posts: 101
Joined: Thu Aug 29, 2013 4:11 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by SE_support » Tue Dec 01, 2020 2:36 pm

Sorry, there is no password. The password can be deleted, but you can't see the pass.
Please read the description on the first page how to remove the pass.
Sorry, I can't provide it.

koyeap85
Posts: 1
Joined: Fri Dec 04, 2020 4:25 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by koyeap85 » Fri Dec 04, 2020 4:38 am

Hi Tom,

I am looking for someone that can help on the section password of my logic, is been locked by someone else.
I need to online and do troubleshooting but my backup logic with no password is missmatch with the one at site.

https://drive.google.com/file/d/1WSo334 ... sp=sharing

Thanks a lot! (oo) (oo) (oo)

Toms
Posts: 170
Joined: Sat Oct 26, 2019 5:56 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by Toms » Sat Dec 05, 2020 12:32 am

Hi
After 2 hours of checking, I could not get the original password. What kind of mutation characters in the password cannot be recovered, but I can unlock and clear the password for you.
Check if there is a teacher in the forum who can retrieve the password

JohnA
Posts: 1
Joined: Tue Dec 15, 2020 2:02 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by JohnA » Tue Dec 15, 2020 2:07 am

hello,

i have this two programs in Unity Pro V11 with two DFB blocks blocked its possible to unlock please?

Thanks in advance
Last edited by JohnA on Sun Jan 03, 2021 11:57 pm, edited 1 time in total.

saloon019
Posts: 55
Joined: Sun Dec 14, 2014 12:06 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by saloon019 » Sat Dec 19, 2020 4:00 pm

Hi JohnA,

see your private message ;)

azzeddineaip
Posts: 3
Joined: Mon Nov 12, 2012 7:10 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by azzeddineaip » Wed Dec 23, 2020 3:07 pm

hello , plase can any one help me to unlock my plc please

PYLIN
Posts: 1
Joined: Thu Dec 31, 2020 3:44 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by PYLIN » Thu Dec 31, 2020 4:14 am

Hi friend I have .sta file with password protection can you able to check password and reveback to me ? 

https://drive.google.com/file/d/1L_sA59 ... p=drivesdk

https://drive.google.com/file/d/1LaoR_6 ... p=drivesdk

Please help me,and many manh thanks if you can tell me password or crack it.

SE_support
Posts: 101
Joined: Thu Aug 29, 2013 4:11 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by SE_support » Wed Jan 06, 2021 9:03 am

the files can't be downloaded.

hamidbenali
Posts: 3
Joined: Sat Jan 09, 2021 4:15 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by hamidbenali » Sun Jan 10, 2021 7:21 am

hi friends
can you help me to unlock plc software, link:

https://www.mediafire.com/file/ztdp3nma ... C.rar/file
thks

Toms
Posts: 170
Joined: Sat Oct 26, 2019 5:56 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by Toms » Mon Jan 11, 2021 3:02 am

friend
I can help you, please email me toms_plc@hotmail.com

jacklebox4545
Posts: 1
Joined: Fri Jan 15, 2021 5:26 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by jacklebox4545 » Fri Jan 15, 2021 6:05 pm

Hello,

Can anyone help me unprotect the DFBs of this program?

Link: https://drive.google.com/file/d/1Gt3OHi ... sp=sharing

Limo82
Posts: 1
Joined: Wed Jan 06, 2021 4:00 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by Limo82 » Fri Jan 22, 2021 5:17 pm

Is it possible to find the plc login name and password in the binary file in the plc memory card?

seems to be very similar in format to a station.apx file

azzeddineaip
Posts: 3
Joined: Mon Nov 12, 2012 7:10 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by azzeddineaip » Sun Jan 24, 2021 3:43 pm

waht shold be the password

dateTime="date_and_time#2020-6-1-11:49:29" password="C8D8180D4D6E52D547009457CABF4B66E736336C1D4903C601D0CA1A1C799FCE9B7D" crypted="1"></contentHeader>

senraker
Posts: 1
Joined: Tue Jan 26, 2021 6:36 am

Re: [?]: Unprotect Schneider UNITY PRO XLS DFBs

Post by senraker » Tue Jan 26, 2021 6:43 am

WE NEED UNITY PRO XL DFB PASSWORD RECOVERY SOME ONE HELP ANY SOFTWARE AVAILABLE

saloon019
Posts: 55
Joined: Sun Dec 14, 2014 12:06 pm

Re: [?]: Unprotect Schneider UNITY PRO XLS DFBs

Post by saloon019 » Tue Jan 26, 2021 9:00 pm

Hi senraker,

i think it doesn't exist for unity and it can be crypted

i know there is a software for recovery password PL7 -> pl7pwdrec.exe

but i don't have this because it's not necessary for PL7

if you have pl7pwdrec.exe i'm interested for test it

HUHU
Posts: 1
Joined: Fri Jan 29, 2021 2:36 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by HUHU » Fri Jan 29, 2021 2:46 am

I have reviewed the code and the contributions you have sent and I have managed to decipher the key of the DFB blocks and I have also managed to remove the keys but what I have not yet been able to do is how is it possible to know the key of the project. For example, in the answer you sent you show the key: 654312 but when I open the HEX file I have: "67899 <.inReserva" so how it relates to the key you show (I know that if I change everything to zero, the key but if it would be important to know the key that was placed). I appreciate it a lot (oo)

desertfox
Posts: 4
Joined: Fri Sep 27, 2013 11:37 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by desertfox » Mon Feb 15, 2021 11:19 pm

Greetings
I need a help with a project from Modicon M340. I read all messages in thread and i cant find a solution. I need password of this project. I hope you can help me...
Project is below
http://www.mediafire.com/file/3ed7xkmg8 ... t.rar/file

saloon019
Posts: 55
Joined: Sun Dec 14, 2014 12:06 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by saloon019 » Tue Feb 16, 2021 4:40 pm

Hi,

Password is crypted but it's ok for section :

https://we.tl/t-909uDKyFte

Bye

desertfox
Posts: 4
Joined: Fri Sep 27, 2013 11:37 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by desertfox » Wed Feb 17, 2021 8:17 am

Hey hello saloon019,
Many thanks to your effort. It will help me (tyou) (tyou)

Jabarovsk
Posts: 2
Joined: Tue Oct 01, 2013 11:22 am

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by Jabarovsk » Sun Feb 28, 2021 11:48 pm

Hello

Could you please help me with this locked DFBs?
https://we.tl/t-6k218gtTyN

Thanks in advance

saloon019
Posts: 55
Joined: Sun Dec 14, 2014 12:06 pm

Re: [?]: Unprotect Schneider PL7-Pro DFBs

Post by saloon019 » Mon Mar 01, 2021 11:15 am

Hi,

WE3164

Bye

Post Reply