Dear Community.
We are having problems when we want to communicate the ePAD05 hmi with Schneider TSXETG100, on the TSXETG100 can only use rj45 for RS232 this side we are using the schematic of the Url: https://ibb.co/PhCPPkj
we are using the pins 4,5,6
On the HMI side it has DB15 port of the Url:https://ibb.co/N9CFgJN
Is this connection ok? or are we wrong.
In addition to all this in the schematic on the HMI side we are using the jumper on pins 10, 11 is this correct for this application?
Tahsks for your time.