[Request] IEC 60870-5-104 and IEC 60870-5-101

Книги по контроллерам
Post Reply
Popescu Stefan
Posts: 10
Joined: Fri Feb 25, 2011 10:31 pm

[Request] IEC 60870-5-104 and IEC 60870-5-101

Post by Popescu Stefan » Mon Mar 21, 2011 8:55 pm

Hi
I'm looking for IEC 60870-5-104 and IEC 60870-5-101 standards. Please share if you have them :)
Best regards

CHANt
Posts: 501
Joined: Tue Jun 27, 2006 5:52 am
Location: Russia

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Post by CHANt » Tue Mar 22, 2011 5:10 am

Sorry, only in Russian
http://narod.ru/disk/8087551001/GOST_TM.Link_is_Dead :(
Только на русском
Архив включает в себя ГОСТ Р МЭК серии 870. Части №1,2,3,4,5,6.
В 5 части присутствуют протоколы, столь популярные в электроэнергетике для систем телемеханики - 101,103 и 104
Там же в папке, есть рекомендации для разработчика по реализации 101 и 104 протоколов от Системного оператора ЕЭС России

Popescu Stefan
Posts: 10
Joined: Fri Feb 25, 2011 10:31 pm

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Post by Popescu Stefan » Tue Mar 22, 2011 9:19 am

Thanks but i need in english :)

dsekulic
Posts: 186
Joined: Sun Feb 12, 2006 5:47 pm
Location: Europe

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Post by dsekulic » Tue Mar 22, 2011 11:53 am


Popescu Stefan
Posts: 10
Joined: Fri Feb 25, 2011 10:31 pm

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Post by Popescu Stefan » Tue Mar 22, 2011 9:39 pm

Thanks a lot :) exaclly what i needed.

relay
Posts: 33
Joined: Tue Jun 28, 2011 9:46 am
Location: Padova (IT)

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Post by relay » Fri Aug 12, 2011 2:26 pm

here a new simulator release (demo working 5 min)
http://www.mitraware.com/

CHANt
Posts: 501
Joined: Tue Jun 27, 2006 5:52 am
Location: Russia

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Post by CHANt » Fri Aug 12, 2011 4:26 pm

Freeware simulator IEC 104 Slave
Language - Russian
IEC104Slave.rar

Sources for C++ IEC 870-5-101/104 Master / Slave, + lib+demo.exe
Language - English
Lib870-5Demo.rar

duoble004
Posts: 2
Joined: Fri Oct 07, 2016 2:03 pm

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Post by duoble004 » Wed Aug 23, 2017 11:49 am

I was cracked this software
IEC 870-5-104 Simulator version 1.3.7

Product key Features:

Easy to use Simulator for IEC 870-5-104 protocol
Simulate master and slave protocol
Support multiple master for slave device
Support structure and unstructure point address
Suitable for troubleshoting and communication test
Monitor raw data exchange
Translate raw data into more meaningful information
Help to develop SCADA/HMI project wihout connected with the real RTU
Simulate Command and Feedback Status
Simulate Setpoint and Feedback Analog
Simulate Step Command and Feedback Step Position
Import master and slave tags from excel file
Download:https://drive.google.com/file/d/0BydlY7 ... sp=sharing
IEC 870-5-101 Simulator
Product key Features:

Easy to use simulator tool for IEC 60870-5-101 protocol
Simulate master and slave protocol
Raw Data capture by using two serial ports
Modem dialup on master device
Support structure and unstructure point address
Support balance and unbalance data transmission
Suitable for troubleshoting and communication test
Monitor raw data exchange
Translate raw data into more meaningful information
Help to develop SCADA/HMI project wihout connected with the real RTU
Simulate Command and Feedback Status
Simulate Setpoint and Feedback Analog
Simulate Step Command and Feedback Step Position
Import master and slave tags from excel file

Download: https://drive.google.com/file/d/0BydlY7 ... sp=sharing
OPC Explorer Version 1.0.2
Product key Features:

Support OPC Data Access 1.0 and 2.0
Connect to multiple OPC Servers
Connect to Local Or Remote OPC Server
Browse OPC Server tags
Scaling for Analog data points
Historical records, Save the data changes
Dowload: https://drive.google.com/file/d/0BydlY7 ... sp=sharing

If you see errors contact me!

Novice
Posts: 43
Joined: Mon Jan 21, 2013 9:29 pm

Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Post by Novice » Sat Jun 10, 2023 11:36 am

Dear,

Please can you re-share the link because this is not working any more.
Please can you re-load it .

Thanks a lot.

Post Reply