[?+]: Pinout layout RS232 to TTY

Questions about Siemens & Analog Siemens hardware.
Software & hardware exchanger
Post Reply
neziu
Posts: 25
Joined: Wed Jul 26, 2006 4:58 pm
Location: Asia Pacific

[?+]: Pinout layout RS232 to TTY

Post by neziu » Fri Jul 13, 2007 12:57 pm

Hello to all,

is anyone of you have a schematic pinout of RS232 to TTY, because i would like to fabricate this cable.

And i need it to communicate to our simatic opxx panel.

Thanks,
neziu

Alexsan
Posts: 15
Joined: Fri Jul 13, 2007 3:32 am
Location: Mexico

Post by Alexsan » Tue Mar 18, 2008 2:12 am

Hello.

The OP panels use a PC-OP programming cable; it´s a DB9 (PC) and DB15 (OP) connector, and it´s not a TTY interface, it´s a "special" serial pinout.

Let me check my notes for pinout.

Regards

Stoyan
Posts: 4
Joined: Wed Mar 28, 2007 9:04 am
Location: Russia

Cable for OP ! (SUB-D 9 (socket) - SUB-D 15 (connector))

Post by Stoyan » Fri Mar 21, 2008 6:11 am

Who intrested pinout cable (type - 6xv1440-2kh25) for connection OP 7 (17) with PC :

SUB-D 9 (socket) ---- SUB-D 15 (connector))

2-5-9 (In parallel on SUB-D 9 (socket))

1 ------------------ ------------------ 12
3 ------------------ ------------------ 3
4 ------------------ ------------------ 4

I make this cable and checked up practice - work !

Post Reply