Page 1 of 1
[?]: Need a SimatiNetc 2000 Driver for CP5613 for Window NT
Posted: Wed Jun 06, 2012 7:13 am
by yogi_g2982
Hi
I need a driver or Simatic Net 2000 for CP 5613(6GK1561-3AA00) for window NT 4.0.
Yogendra.
Re: Need a Driver for CP5412-A2
Posted: Wed Jun 06, 2012 7:38 am
by CoMod
Which SIMATIC NET PROFIBUS PC CP is compatible with which Microsoft Windows operating system?
http://support.automation.siemens.com/W ... n/22611503
COMMUNICATION PROCESSOR
CP 5412 (A2) ISA CARD (16 BIT) COMMUNICATIONS PROCESSOR FOR CONNECTION OF A PG/PC TO PROFIBUS
Win98, WinNT
For modern CP:
For Windows XP - install Step7
For Windows 7 x64 - install Simatic Net: SIMATIC Device Drivers.msi (WinCC_7.0_SP3\InstData\SimaticNet_2010\sw\x64\simnetpc\S7DOS64\setup)
Re: Need a Driver for CP5412-A2
Posted: Wed Jun 06, 2012 4:13 pm
by yogi_g2982
I am Sorry I need a driver or Simatic Net 2000 for CP 5613(6GK1561-3AA00) for window NT 4.0.
Re: [?]: Need a Driver for CP5613 for Window NT
Posted: Wed Jun 06, 2012 4:50 pm
by CoMod
Re: [?]: Need a Driver for CP5613 for Window NT
Posted: Thu Jun 07, 2012 6:56 am
by yogi_g2982
Please see below link as per this to install Service Pack 3 for CP 5613/14 Windows NT 4.0 , 2000 Pro / V2.1 requires prior installation of one of the CP 5613 products from the SIMATIC NET CD "05/2000" and I don't have SIMATIC NET CD "05/2000". Please give me link to download Simatic Net 05/2000.
http://support.automation.siemens.com/W ... en/8759663