[?]: How to connect TS adater to PLC S7-300

Questions about Siemens & Analog Siemens hardware.
Software & hardware exchanger
Post Reply
srithep
Posts: 10
Joined: Fri May 07, 2010 5:05 am

[?]: How to connect TS adater to PLC S7-300

Post by srithep » Fri May 07, 2010 5:54 am

Now i have software Simatic Manager 5.4,Teleservice 6.0 / hadware TS adapter V.5.
I want to direct conecting to PLC S7-300 i make the RS323 cable follow instruction manual of TS adapter
but after that i try to connect ,it can't to connecting the massage show no.13:4542.
After that try to set PG/PC interface but it can't.
Please instruct me how to connect it.
Thank you
Srithep

sania
Site Admin
Posts: 1196
Joined: Sat Aug 13, 2005 6:15 am

Re: [?]: How to connect TS adater to PLC S7-300

Post by sania » Fri May 07, 2010 7:54 am

open teleservice - option - assign... - choose your connection(pb/mpi,rate,hsa) - ok - ok

srithep
Posts: 10
Joined: Fri May 07, 2010 5:05 am

Re: [?]: How to connect TS adater to PLC S7-300

Post by srithep » Sun May 09, 2010 5:24 am

Thank uou. I upload the picture of direct connection TS adapter.
please suggest me How to make the cable of RS323 for direct connection.
I need to use TS adapter to direct connection because i don't have the PC adapter.

Image

sania
Site Admin
Posts: 1196
Joined: Sat Aug 13, 2005 6:15 am

Re: [?]: How to connect TS adater to PLC S7-300

Post by sania » Mon May 10, 2010 5:58 am

Image
open set_pg/pc
1)choose ts
2)press
3)your com-port
4)speed from dip-switch of ts-adapter

connect ts to plc & pc
start teleservice
5)option - assign ts adapter I/II parameters
6)choose your pc address
7)choose your network parameters

p.s.
pinout http://support.automation.siemens.com/W ... n/14053309
p.44-46

srithep
Posts: 10
Joined: Fri May 07, 2010 5:05 am

Re: [?]: How to connect TS adater to PLC S7-300

Post by srithep » Thu May 13, 2010 4:28 am

Thank you very much for you teach me.
Now i can connect PC to PLC.
I can use this adapter download HMI file from Touch screen by MPI connector or not ?

Post Reply