[LINK]: WinBass for Baumuller drives

привода и частотники
Post Reply
Prods
Posts: 26
Joined: Tue Jun 17, 2008 10:48 am
Location: Europe

[LINK]: WinBass for Baumuller drives

Post by Prods » Tue Jun 17, 2008 11:04 am

hi all, I need Winbass software for parameterization of Baumuller drives .

Thanks.

ppp
Posts: 268
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Post by ppp » Mon Jun 23, 2008 5:58 am

This is very old program.
Now everyone use winbassII for new converters.
Once for a long time has made under already established program installer in Russian language.
But program in English and Deutsch language.
Probably there not all converters.

But have only this WinBass version 6.08.
Image


Link_is_Dead :(/winbass.exe

Prods
Posts: 26
Joined: Tue Jun 17, 2008 10:48 am
Location: Europe

Thx

Post by Prods » Wed Jun 25, 2008 9:54 am

Thank you ppp . :)
And what about WinbassII do you have it?

alexvega
Posts: 8
Joined: Wed Mar 19, 2008 3:52 am
Location: Russia

Alexvega

Post by alexvega » Thu Sep 18, 2008 3:41 am

I need Pinout of Baumuller drives programming cable.
(drives X23 - PC com).
Please Help me ,

Thanks .

nnaf
Posts: 30
Joined: Sun Apr 15, 2007 3:25 pm
Location: Russia

Post by nnaf » Sat Dec 20, 2008 5:02 pm


Toxicguy
Posts: 6
Joined: Thu Jan 14, 2010 12:07 pm

Re: [LINK]: WinBass for Baumuller drives

Post by Toxicguy » Fri Mar 18, 2011 12:01 pm

Does anybody have valid serial number for WINBASS software? I downloaded version 6.08 but it unfortunately installs without any keys. Problem is that this version doesn't support BUS6VC version 5214.12. Well, I have version 6.13, but it ask serial number.

Thank You in advance.


mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: [LINK]: WinBass for Baumuller drives

Post by mohdabshr » Wed Jun 21, 2017 8:36 pm

Hi ppp
I need pcbass if you have because we have inverter with sw 200.0 and with winbass I didn't found this sw it only 202.2

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: [LINK]: WinBass for Baumuller drives

Post by mohdabshr » Thu Jun 22, 2017 9:18 am

dear


we have problem in one drive baumueller CONTROLLER Baumüller M-Drive-Reglergerät BUS 6M and power card is BUM63S-150/195-45-M-005
, when we start drive it give error 40 in forward direction and error 700 in reverse direction and i try to find this error meaning but i failed to find right documents about errors code and also i am trying to go online with WinBASS II v6.08 and v6.11 file BUS6VC and there is SW 0202.02 the software complain about the SW version the controller SW is 0200.00 and this SW not included in WinBASS II v6.08 BUS6VC and v6.11, SO I need to know the meaning of the two errors(40&700) and from where i can get the file of SW 0200.0 or which WinBASS vesion have the file SW 0200.0 in BUS6VC.

thanks,

arslan
Posts: 2
Joined: Mon Jan 11, 2021 11:52 pm

Re: [LINK]: WinBass for Baumuller drives

Post by arslan » Tue Jan 12, 2021 3:05 am

Hello Everone,

We have Baumuller BUM61-40/60 servo drive, originally it was commissioned in speed control mode but now we want to
change it to position control mode. if some one has manual that how can we change it position control mode and control the direction of motor by means of digital inputs, please share with me the manual.
Win are using WINBASS software.

Thanks

Arslan

m0eX
Posts: 3
Joined: Mon May 22, 2017 5:23 pm

Re: [LINK]: WinBass for Baumuller drives

Post by m0eX » Mon May 23, 2022 1:21 pm

Can anyone reupload links? Thanks

Rishinath R
Posts: 3
Joined: Tue May 10, 2022 10:41 am

Re: [LINK]: WinBass for Baumuller drives

Post by Rishinath R » Mon Jun 13, 2022 7:36 am


MKoushyari
Posts: 1
Joined: Mon Sep 04, 2023 3:31 pm

Re: [LINK]: WinBass for Baumuller drives

Post by MKoushyari » Mon Sep 04, 2023 5:06 pm

Hi
Is it possible to send the download link again?

Thanks

Skippy
Posts: 4
Joined: Tue Sep 26, 2023 7:20 am

Re: [LINK]: WinBass for Baumuller drives

Post by Skippy » Thu Oct 12, 2023 8:34 am

Hello !
Can anyone can reupload winbass II ? Thx

Post Reply