Need firmware for Danfoss FC302

привода и частотники
Post Reply
Xenonci
Posts: 15
Joined: Mon Apr 21, 2014 4:37 pm

Need firmware for Danfoss FC302

Post by Xenonci » Sat Jan 06, 2018 2:03 pm

Hi Guys,

I need to roll back firmware into Danfoss FC302 inverter. Now it is 40.05. I need version 4.38 or earlier.
Where I can find firmware images (files *.ose or *.osx) firmware in Danfoss FC302 using software MCT ?

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Need firmware for Danfoss FC302

Post by mohdabshr » Sun Jan 07, 2018 3:39 am

In MCT use converter to change firmware and download to FC302.

Xenonci
Posts: 15
Joined: Mon Apr 21, 2014 4:37 pm

Re: Need firmware for Danfoss FC302

Post by Xenonci » Sun Jan 07, 2018 10:45 am

What is the menu item in the mct 10 for this?
How to download the firmware from the danfoss drive for convert???

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Need firmware for Danfoss FC302

Post by mohdabshr » Sun Jan 07, 2018 1:18 pm

Hi after you opened your project with MCT right click mouse on the project you will see in the menu convert drive.

Thanks

Xenonci
Posts: 15
Joined: Mon Apr 21, 2014 4:37 pm

Re: Need firmware for Danfoss FC302

Post by Xenonci » Tue Jan 09, 2018 10:21 am

Hi
When I try to write to the drive the project from an early version 4.38 it fails with the following message. Version 5.84 does not overwrite. :( :(

Image

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Need firmware for Danfoss FC302

Post by mohdabshr » Tue Jan 09, 2018 11:02 am

Hi in your project you didn't change the voltage to be 380-500 volt and you didn't choose the option A this is reason.

Xenonci
Posts: 15
Joined: Mon Apr 21, 2014 4:37 pm

Re: Need firmware for Danfoss FC302

Post by Xenonci » Tue Jan 09, 2018 1:12 pm

I have adjusted the tension and removed the option. Version 4.38 is not rewritten 5.84. Project loaded good, but in paragraph 15.43 are still version software 05.84.


Image

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Need firmware for Danfoss FC302

Post by mohdabshr » Tue Jan 09, 2018 6:05 pm

Hi what is the reason you want to change the firmware of the drive to 4.38.

Xenonci
Posts: 15
Joined: Mon Apr 21, 2014 4:37 pm

Re: Need firmware for Danfoss FC302

Post by Xenonci » Wed Jan 10, 2018 3:50 pm

Hi
Because the controller omron CJ1-M not familiar with the danfoss 4.38 above. Error "no connection". Program the controller to change there is no possibility

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Need firmware for Danfoss FC302

Post by mohdabshr » Thu Jan 11, 2018 5:34 pm

Hi my friend I think the firmware not effect the communication between fc302 and plc you must check setting and wiring , what is the communication between fc302 and plc .

Xenonci
Posts: 15
Joined: Mon Apr 21, 2014 4:37 pm

Re: Need firmware for Danfoss FC302

Post by Xenonci » Sat Jan 13, 2018 7:35 am

Hi.
When I put outside instead of the frequency Converter Converter firmware 4.38 it works in that place. When I put any other Converter with firmware older than 4.38 - it doesn't work. Meanwhile, they all meet in the fc Protocol when communicating with the laptop.Now I am trying to connect the old inverter VLT5000 FC302 instead.

atifpk1983
Posts: 5
Joined: Wed Oct 02, 2019 11:24 am
Location: Pakistan

Re: Need firmware for Danfoss FC302

Post by atifpk1983 » Sat Jan 20, 2024 5:17 pm

Dear, it is official firmware Danfoss doesn't share it with anyone but only authorized service partners.
for further information please contact me at
am.engineer.pk@gmail.com

Post Reply