Hi,
I'm having problem to use PCMCIA Card (NDPA-02) on my new laptop through express card/pcmcia adapter,
windows xp detect card attached as PCI standard PCI-to-PCI bridge and Drive Window does not detect card.
What driver to install so the windows recognize card proper to establish communication with abb drive.
[?]: configure ABB NDPA-02 PCMCIA card
Re: [?]: configure ABB NDPA-02 PCMCIA card
Install DWSP0810, you need NTNISA driver. You can download this pack at ABB.com.
Att
SoulHack
Att
SoulHack
Re: [?]: configure ABB NDPA-02 PCMCIA card
Hello,
What kind of Windows OS did you use there? Basically you don't need any driver to be installing there. Just DriveMon and that's it.
Best regards,
What kind of Windows OS did you use there? Basically you don't need any driver to be installing there. Just DriveMon and that's it.
Best regards,
Re: [?]: configure ABB NDPA-02 PCMCIA card
I tried that and it didn't work still same problem I think that adapter express card => pcmcia does not support communication abb card require.SOULHACK wrote:Install DWSP0810, you need NTNISA driver. You can download this pack at ABB.com.
Re: [?]: configure ABB NDPA-02 PCMCIA card
You want to use the new RUSB-02 USB/DDCS. Your adapter support PCMCIA 32 bits.
Regards
SoulHack
Regards
SoulHack
Re: [?]: configure ABB NDPA-02 PCMCIA card
@SOULHACK thanks for the advice will try.
-
- Posts: 1
- Joined: Wed Dec 05, 2018 11:38 am
Re: [?]: configure ABB NDPA-02 PCMCIA card
did anyone manage to communicate with NDPA-02 via some PCI / PCMCIA converter for laptop