(offtop)
Posted: Tue Jan 28, 2014 2:43 am
Page 1 of 1
Re: Backup parameters for Emerson unidrive
Posted: Thu Feb 06, 2014 6:09 pm
Try serial communication.
0.35 Serial mode
0.36 Serial communications baud rate
0.37 Serial communications address
On panel check/set these parameters:The Unidrive SP has a standard 2-wire EIA485 interface (serial
communications interface) which enables all drive set-up, operation and
monitoring to be carried out with a PC or controller if required.
0.35 Serial mode
0.36 Serial communications baud rate
0.37 Serial communications address