[?]:

привода и частотники
Post Reply
yeosh99
Posts: 59
Joined: Thu Jul 14, 2011 4:40 pm

[?]:

Post by yeosh99 » Thu Jan 16, 2014 10:45 am

:) :)
Last edited by yeosh99 on Tue Dec 30, 2014 3:14 pm, edited 1 time in total.

yeosh99
Posts: 59
Joined: Thu Jul 14, 2011 4:40 pm

Required: ABB Drivewindow for ACS800

Post by yeosh99 » Thu Jan 16, 2014 2:59 pm

:shock:
Last edited by yeosh99 on Tue Dec 30, 2014 3:15 pm, edited 1 time in total.

MEFinc
Posts: 42
Joined: Thu Dec 08, 2011 11:23 am

Re: [?]: replace ABB ACS800 Drive RMIO card

Post by MEFinc » Thu Jan 16, 2014 5:12 pm

If you bought RMIO with firmware for your drive type (inverter type) then you don't need do anything. When you turn on (first 2-3 seconds) a drive, if all alright, you will see your type of drive on the screen.
If you use RMIO from another drive or RMIO with another firmware (not standart for example) you need to select the correct inverter type or (if firmware different from your) installed correct firmware.
Select correct inverter type you can from drive panel or with DriveWindows (par. 112).
To install new firmware you need DriveWindows or special ABB software for installation.

MEFinc
Posts: 42
Joined: Thu Dec 08, 2011 11:23 am

Re: Required: ABB Drivewindow for ACS800

Post by MEFinc » Thu Jan 16, 2014 5:26 pm

In THIS topic Linkinx64 gave the link for downloading (DriveWindow_v2.30.zip). I checked, it's working. It on Filefactory but you don't need to registrate or something.

Post Reply