[?]: how connect intouch 9.5 / 10 -- S7 300

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
PLC_ITA
Posts: 263
Joined: Sat May 27, 2006 6:46 am
Location: Europe

[?]: how connect intouch 9.5 / 10 -- S7 300

Post by PLC_ITA » Mon May 26, 2008 5:24 am

HELP HELP
Hello friend's
I need a help from this community.
I'm novice whit INTOUCH but i need to do a little modify into a existanat
project
I have already load a projet and the modify is already builded.
Now i want to try this in my office.
The connection is via ethernet with CP341 but i dont understand where i setting this communication parameter

ANYONE can help me ?

Many thank's in advance
Top
youhm
Posts: 14
Joined: Wed Jan 23, 2008 12:17 am
Location: China

Post by youhm » Mon May 26, 2008 12:30 pm

You can use SIDirect.

ftp://ftp.utitech.com.tw/DA_Server%A4U% ... 0DAServer/
Top
PLC_ITA
Posts: 263
Joined: Sat May 27, 2006 6:46 am
Location: Europe

help help

Post by PLC_ITA » Fri May 30, 2008 9:55 am

Thank you, i have downloaded all and i have try to use SIDIRECT
but nothing to do !!
Can You expain me step by step how i configure SIDERECT

The plc have a CP341 whit 192.168.50.1 address

thank a lot
Top
Umencho
Posts: 508
Joined: Mon Jul 16, 2007 12:28 pm
Location: Europe

Re: help help

Post by Umencho » Fri May 30, 2008 11:27 am

Hi

Use this: http://plc.net.ru/viewtopic.php?t=6660& ... assidirect

best regards
umencho
Top
PLC_ITA
Posts: 263
Joined: Sat May 27, 2006 6:46 am
Location: Europe

Post by PLC_ITA » Tue Jun 03, 2008 10:05 am

thank you Umencho !!
:P
Top
Post Reply

Return to “Other HMI”