PLCforum.uz.ua

I have Progea Movicon X11
I Need keygen for Progea Movicon X11.

keygen is bad way. algorithm will change in next build. need dump from hardware key for software emulation.
Link_is_Dead :(/E ... ovicon.zip
Movicon 11 Rel. 11.0.1013 Oct 2008 .zip (504 Mb)
P.S. hmmm somebody (admin?) change my link and filename. it not Progea Movicon 11 key emulator. it only tools for make dump from Eutron SmartKey hardware key & make driver from dump (duplicate key).

i need dump from key 11 version for make full unlimited key
for example http://plc.net.ru/viewtopic.php?t=5740&start=15
send me in PM, please.

If you are using Movicon11, please use the tool
Link_is_Dead :(/E ... ovicon.zip
make a dump of the key, and upload it, thanks.

Movicon11 Rel. 11.0.1014
http://www.movicon.info/download/setup/Mov11_Setup.zip Movicon 11 Build 1015 now available

Movicon 11 Build 1015 for Chinese

Link_is_Dead :(/M ... ateCHS.exe

deymon wrote:keygen is bad way. algorithm will change in next build. need dump from hardware key for software emulation.
Link_is_Dead :(/E ... ovicon.zip
Movicon 11 Rel. 11.0.1013 Oct 2008 .zip (504 Mb)
P.S. hmmm somebody (admin?) change my link and filename. it not Progea Movicon 11 key emulator. it only tools for make dump from Eutron SmartKey hardware key & make driver from dump (duplicate key).

Hi deymon
Emul_key_for_Progea_Movicon.zip is Ver1.01

I have EuDMP V3.07,
Link_is_Dead :(/EuDMP_V3.07.rar

How Will Make Eutron.dmp to Eutron.sys For V3.07?

think

hi China brother
your link not work
direct link for this tool http://www.brstudio.com/Keys/eudmp.rar
it's different programs and compare versions not correct

deymon wrote:Movicon 11 Rel. 11.0.1016 Apr 2009 (564 Mb)

this address download is 11.0.1014(546Mb)
d'nt download 11.0.1016 or 11.1 Bata

Dear Friends

I have installed Movicon on a PC that does not have a Parallel port, so the license is not working and it is showing me that the serial number is 0.

does anybody have a solution for me?

mech962784: try install parallel port driver without real hardware.

McAlexU: for 10 only:
Link_is_Dead :(/mov10m.zip
Link_is_Dead :(/mov_drv_lic_code.zip
sometimes not working

Where i can find parallel port driver, so i can install it ?
Start - Control Panel - Add new hardware
Add new device - Manual - Ports - Parallel port

http://www.movicon.info/download/setup/ ... _Setup.zip
为Movicon 11.1_1054

Hello

is there any crack/serial for Progea Movicon 11 available or just for version 10.x? At the moment I´m a little bit confused about the conversation in this thread.
Where can I find a crack/serial?

Thank you for your answer in advance

Vansdan

Movicon 11.1 Ver 1055.
http://www.movicon.info/download/setup/ ... _Setup.zip

Please Crack or Keygen Help me.

emulator for 11 at the end of this topic:
viewtopic.php?f=14&t=5740&p=37554#p37554

Movicon 11.2 Rel. 11.2.1083 Oct 2010 (620 Mb)
http://www.movicon.info/download/setup/ ... _Setup.zip

Hello, I have Movicon ver 11.4.1151
I need key number for active it.
can you help?

asgari64 wrote: ↑

Thu Nov 18, 2021 9:40 am

I have Movicon ver 11.4.1151

There is no common key for all. It is generated for a specific computer. Use the generator at https://only-soft.org/viewtopic.php?t=20186

Hi,
Anyone can share download link for Movicon Pro.Energy .NExT.
Thanks