Page 1 of 1
[LINK]: License for Kepware LinkMaster
Posted: Fri Nov 30, 2007 8:34 am
by liwei
I am looking license or keygen for Kepware LinkMaster
Would you please help me?
Best regards.
Posted: Tue Jan 15, 2008 12:38 pm
by frankw
You can use the Kepware KeyGen to generate the SN and PW.
Using WinHex to change 2bytes of Keygen file, what is the file address ?
so sorry, I will Update it quickly.
Posted: Sun Jan 20, 2008 8:27 am
by frankw
LinkMaster KEYGEN :
2 years ago,I made it by changing Kepware KEYGEN V4.160.316U at file addr. 3418, replace 5500000084464000 to C201000084464000
then select AB Bulletin 900 Device Driver
Good luck
Posted: Sun Jan 20, 2008 12:57 pm
by mech962784
Dear Frankw
i was not able to find neither the offset address you have mentioned nor the 5500000084464000 ?
i have used both the hiew and winhex?
can you please clarify it little bit?
Best Regards
Posted: Sun Jan 20, 2008 10:11 pm
by Schtiel
mech962784 wrote:i was not able to find neither the offset address you have mentioned nor the 5500000084464000 ?
That's because the file is packed. I've made a necessary replacement for you.
Enjoy!
Link_is_Dead :(/LinkMaster.zip
Posted: Mon Jan 21, 2008 5:45 am
by mech962784
Dear Schtiel
Thank you very much for your kindness,
But i am facing one problem with your keygen.
the license number is working fine
but for generating the unlock number based on the computer ID,the unlock code is not working and still it is giving that i have a temporary license for 10 days!! (i am using linkmaster V2.37.124.0-U)
any help or guidance please either from you or mr frankw.
we are suffering a lot with this software,but i know that you guys can do it
Best Regards
Posted: Mon Jan 21, 2008 7:51 pm
by liuxianfu
Posted: Tue Jan 22, 2008 7:32 am
by Schtiel
It was made from other Kepware keygen. Select AB Bulletin 900 Device Driver for LinkMaster Serial Numbar generating.
Posted: Wed Jan 23, 2008 12:33 am
by youhm
I would also like Mech962784 and can not get the correct password
Posted: Thu Jan 24, 2008 12:55 am
by frankw
I found out the reason,
the LinkMaster P.W. calculation is still unchanged, so the version of Kepware KEYGEN you used should be older than V4.160.316U, I can not find it now.
Posted: Thu Jan 24, 2008 2:59 pm
by zenchek
Hi frankw
This is original keygen V4.160.316U
Link_is_Dead :(/SO ... U.Link_is_Dead :(
Please, patch and share it.
Regards zenchek
Posted: Fri Feb 01, 2008 1:04 am
by Sparrow
Dear Schtiel
Thank you for your work,
But i am facing the same problem with the Keygen too.
the license number is working fine
but for generating the unlock number based on the computer ID,
the unlock code is not working a
nd still it is giving that i have a temporary license for 10 days!! (
i am using linkmaster V1.21.76)
best regards
linkmaster
Posted: Mon Mar 03, 2008 6:25 am
by vlad2006gr
http://www.kepware.com/Products/Downloa ... Master.exe
www.kepware.com/Products/downloads/KEPServerEx.exe
For LinkMaster:
Download
Link_is_Dead :(/KEYLIB32.Link_is_Dead :(
1. Install LinkMaster.
2. Enter S/N 7-20038-62386627188-3650
3. Close LinkMaster.
4. Replace KEYLIB32.dll
5. Run LinkMaster.
6. Open Help, Unlock and enter any namber (example 1234321)
7. Done
Good luck!
Posted: Mon Mar 10, 2008 9:59 pm
by scaramanga
Does anyone have a link or info for cracking kepware ClientAce?
cheers
Posted: Sat Aug 23, 2008 8:13 am
by votuandktd
Please post again file KEYLIB32.dll. I can't download it.
Many thanks.
Re: [LINK]: License for Kepware LinkMaster
Posted: Thu Jan 06, 2011 9:55 am
by pai-pro
LinkMaster KEYGEN :
Please post again file KEYLIB32.dll. I can't download it.
Many thanks.
Download
Link_is_Dead :(/KEYLIB32.Link_is_Dead :( not working
Re: [LINK]: License for Kepware LinkMaster
Posted: Tue Mar 08, 2011 11:31 am
by budisanuri
its work for.. thanks vlad2006gr
Re: [LINK]: License for Kepware LinkMaster
Posted: Wed Aug 08, 2012 7:02 pm
by lxiaob
Is there anybody can post KEYLIB32.dll again?
The link
Link_is_Dead :(/KEYLIB32.Link_is_Dead :( is broken.
Thanks in advance.
Re: [LINK]: License for Kepware LinkMaster
Posted: Wed Nov 13, 2013 4:13 pm
by chenchen2314
My project need communication with 2 OPC SERVER.so I use the linkmaster.
I can't generate the right password,
so who can post a useful KEYLIB32.DLL.
thanks very much.
Re: [LINK]: License for Kepware LinkMaster
Posted: Thu Aug 14, 2014 11:16 am
by ciwa
re-upload the file please...
Re: [LINK]: License for Kepware LinkMaster
Posted: Sat Aug 30, 2014 3:01 pm
by vlad2006gr
Re: [LINK]: License for Kepware LinkMaster
Posted: Sat Aug 30, 2014 4:34 pm
by ciwa
thank you Mr. Vlad...
Re: [LINK]: License for Kepware LinkMaster
Posted: Tue Nov 11, 2014 12:52 pm
by brave07
Mr. Vlad. Please re-upload file
Re: [LINK]: License for Kepware LinkMaster
Posted: Tue Nov 25, 2014 5:25 am
by vlad2006gr
brave07 Wrote:
Mr. Vlad. Please re-upload file
Link is good. See how to download-
http://www.4shared.com/office/a2-1td0Nb ... lesru.html
Good luck!
Re: [LINK]: License for Kepware LinkMaster
Posted: Thu Dec 25, 2014 5:15 am
by harek10
Re: [LINK]: License for Kepware LinkMaster
Posted: Tue Sep 29, 2015 10:03 am
by wiser87
Update the link to the program LinkMaster
Re: [LINK]: License for Kepware LinkMaster
Posted: Tue Sep 29, 2015 10:44 am
by Carlos
Re: [LINK]: License for Kepware LinkMaster
Posted: Thu Dec 24, 2015 1:38 am
by Hello_there
I work at Kepware. First off, thank you for using our tools. I am glad that you like them and I hope that you have a great experience. In the future, though, from one person to another I hope that you consider purchasing our software. We offer multi-week temp licenses! We all work really hard to build these tools, and our company means a lot to us and to our small home city. Thanks for reading!
