[LINK]: License for Kepware LinkMaster

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
liwei
Posts: 2
Joined: Tue Nov 13, 2007 6:19 am
Location: China

[LINK]: License for Kepware LinkMaster

Post by liwei » Fri Nov 30, 2007 8:34 am

I am looking license or keygen for Kepware LinkMaster
Would you please help me?
Best regards.

frankw
Posts: 103
Joined: Tue Mar 06, 2007 5:59 am
Location: China

Post by frankw » Tue Jan 15, 2008 12:38 pm

You can use the Kepware KeyGen to generate the SN and PW.
Using WinHex to change 2bytes of Keygen file, what is the file address ?

so sorry, I will Update it quickly.

frankw
Posts: 103
Joined: Tue Mar 06, 2007 5:59 am
Location: China

Post by frankw » Sun Jan 20, 2008 8:27 am

LinkMaster KEYGEN :

2 years ago,I made it by changing Kepware KEYGEN V4.160.316U at file addr. 3418, replace 5500000084464000 to C201000084464000

then select AB Bulletin 900 Device Driver

Good luck

mech962784
Posts: 217
Joined: Mon Nov 12, 2007 12:10 pm

Post by mech962784 » Sun Jan 20, 2008 12:57 pm

Dear Frankw

i was not able to find neither the offset address you have mentioned nor the 5500000084464000 ?

i have used both the hiew and winhex?

can you please clarify it little bit?

Best Regards

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Sun Jan 20, 2008 10:11 pm

mech962784 wrote:i was not able to find neither the offset address you have mentioned nor the 5500000084464000 ?
That's because the file is packed. I've made a necessary replacement for you.

Enjoy!

Link_is_Dead :(/LinkMaster.zip

mech962784
Posts: 217
Joined: Mon Nov 12, 2007 12:10 pm

Post by mech962784 » Mon Jan 21, 2008 5:45 am

Dear Schtiel

Thank you very much for your kindness,
But i am facing one problem with your keygen.

the license number is working fine
but for generating the unlock number based on the computer ID,the unlock code is not working and still it is giving that i have a temporary license for 10 days!! (i am using linkmaster V2.37.124.0-U)

any help or guidance please either from you or mr frankw.
we are suffering a lot with this software,but i know that you guys can do it ;)

Best Regards

liuxianfu
Posts: 3
Joined: Tue Sep 25, 2007 9:29 am
Location: China

Post by liuxianfu » Mon Jan 21, 2008 7:51 pm

Link_is_Dead :(/LinkMaster.zip
it is not LinkMaster Key.

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Tue Jan 22, 2008 7:32 am

It was made from other Kepware keygen. Select AB Bulletin 900 Device Driver for LinkMaster Serial Numbar generating.

youhm
Posts: 14
Joined: Wed Jan 23, 2008 12:17 am
Location: China

Post by youhm » Wed Jan 23, 2008 12:33 am

I would also like Mech962784 and can not get the correct password

frankw
Posts: 103
Joined: Tue Mar 06, 2007 5:59 am
Location: China

Post by frankw » Thu Jan 24, 2008 12:55 am

I found out the reason,
the LinkMaster P.W. calculation is still unchanged, so the version of Kepware KEYGEN you used should be older than V4.160.316U, I can not find it now.

zenchek
Posts: 82
Joined: Mon Aug 14, 2006 1:23 pm
Location: Sud America

Post by zenchek » Thu Jan 24, 2008 2:59 pm

Hi frankw
This is original keygen V4.160.316U
Link_is_Dead :(/SO ... U.Link_is_Dead :(
Please, patch and share it.
Regards zenchek

Sparrow
Posts: 1
Joined: Thu Jan 31, 2008 9:59 am

Post by Sparrow » Fri Feb 01, 2008 1:04 am

Dear Schtiel

Thank you for your work,
But i am facing the same problem with the Keygen too.
the license number is working fine
but for generating the unlock number based on the computer ID,
the unlock code is not working a
nd still it is giving that i have a temporary license for 10 days!! (
i am using linkmaster V1.21.76) :shock:

best regards

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

linkmaster

Post by vlad2006gr » Mon Mar 03, 2008 6:25 am

http://www.kepware.com/Products/Downloa ... Master.exe
www.kepware.com/Products/downloads/KEPServerEx.exe
For LinkMaster:
Download Link_is_Dead :(/KEYLIB32.Link_is_Dead :(
1. Install LinkMaster.
2. Enter S/N 7-20038-62386627188-3650
3. Close LinkMaster.
4. Replace KEYLIB32.dll
5. Run LinkMaster.
6. Open Help, Unlock and enter any namber (example 1234321)
7. Done
Good luck!

scaramanga
Posts: 10
Joined: Wed Aug 29, 2007 10:04 pm
Location: America

Post by scaramanga » Mon Mar 10, 2008 9:59 pm

Does anyone have a link or info for cracking kepware ClientAce?

cheers

votuandktd
Posts: 58
Joined: Sun Aug 13, 2006 12:51 pm
Location: Vietnam

Post by votuandktd » Sat Aug 23, 2008 8:13 am

Please post again file KEYLIB32.dll. I can't download it.
Many thanks.

pai-pro
Posts: 1
Joined: Thu Jan 06, 2011 9:19 am

Re: [LINK]: License for Kepware LinkMaster

Post by pai-pro » Thu Jan 06, 2011 9:55 am

LinkMaster KEYGEN :
Please post again file KEYLIB32.dll. I can't download it.
Many thanks.
Download Link_is_Dead :(/KEYLIB32.Link_is_Dead :( not working

budisanuri
Posts: 6
Joined: Fri Nov 21, 2008 3:09 pm
Location: Indonesia

Re: [LINK]: License for Kepware LinkMaster

Post by budisanuri » Tue Mar 08, 2011 11:31 am

its work for.. thanks vlad2006gr (thnx)

lxiaob
Posts: 1
Joined: Wed Aug 08, 2012 6:57 pm

Re: [LINK]: License for Kepware LinkMaster

Post by lxiaob » Wed Aug 08, 2012 7:02 pm

Is there anybody can post KEYLIB32.dll again?
The link Link_is_Dead :(/KEYLIB32.Link_is_Dead :( is broken.

Thanks in advance.

chenchen2314
Posts: 4
Joined: Sat Jul 21, 2012 8:56 am

Re: [LINK]: License for Kepware LinkMaster

Post by chenchen2314 » Wed Nov 13, 2013 4:13 pm

My project need communication with 2 OPC SERVER.so I use the linkmaster.
I can't generate the right password,
so who can post a useful KEYLIB32.DLL.
thanks very much. (wow) (wow)

ciwa
Posts: 145
Joined: Fri Aug 25, 2006 3:50 pm
Location: Indonesia

Re: [LINK]: License for Kepware LinkMaster

Post by ciwa » Thu Aug 14, 2014 11:16 am

re-upload the file please...

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [LINK]: License for Kepware LinkMaster

Post by vlad2006gr » Sat Aug 30, 2014 3:01 pm

re link keylib32
http://dfiles.ru/files/uxqlby83y
Good luck!

ciwa
Posts: 145
Joined: Fri Aug 25, 2006 3:50 pm
Location: Indonesia

Re: [LINK]: License for Kepware LinkMaster

Post by ciwa » Sat Aug 30, 2014 4:34 pm

thank you Mr. Vlad...

brave07
Posts: 2
Joined: Tue Nov 11, 2014 12:48 pm

Re: [LINK]: License for Kepware LinkMaster

Post by brave07 » Tue Nov 11, 2014 12:52 pm

vlad2006gr wrote:re link keylib32
http://dfiles.ru/files/uxqlby83y
Good luck!
Mr. Vlad. Please re-upload file

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [LINK]: License for Kepware LinkMaster

Post by vlad2006gr » Tue Nov 25, 2014 5:25 am

brave07 Wrote:
Mr. Vlad. Please re-upload file
Link is good. See how to download-
http://www.4shared.com/office/a2-1td0Nb ... lesru.html
Good luck!

harek10
Posts: 1
Joined: Wed Dec 24, 2014 4:32 pm

Re: [LINK]: License for Kepware LinkMaster

Post by harek10 » Thu Dec 25, 2014 5:15 am

Hello. Help please. Could you reload old version linkmaster kepware? (sos) (sos) (sos)

wiser87
Posts: 21
Joined: Thu Nov 12, 2009 4:07 am

Re: [LINK]: License for Kepware LinkMaster

Post by wiser87 » Tue Sep 29, 2015 10:03 am

Update the link to the program LinkMaster


Hello_there
Posts: 1
Joined: Thu Dec 24, 2015 1:26 am

Re: [LINK]: License for Kepware LinkMaster

Post by Hello_there » Thu Dec 24, 2015 1:38 am

I work at Kepware. First off, thank you for using our tools. I am glad that you like them and I hope that you have a great experience. In the future, though, from one person to another I hope that you consider purchasing our software. We offer multi-week temp licenses! We all work really hard to build these tools, and our company means a lot to us and to our small home city. Thanks for reading!

Post Reply