FactoryLink v6.5.0 Serial and Configuration Sequence

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
tvk2650
Posts: 6
Joined: Wed Jul 30, 2014 6:31 am

FactoryLink v6.5.0 Serial and Configuration Sequence

Post by tvk2650 » Wed Jul 30, 2014 7:04 am

Hi,

has anyone a serial and configuration sequence for factorylink 6.5.0? I have installation package, but can't install without these codes.
Or is there a workaround to install without these codes?

I want to analyse a FLink project to convert everything to cimplicity.

Best regards

Carlos
Posts: 105
Joined: Sat Apr 30, 2011 7:08 pm

Re: FactoryLink v6.5.0 Serial and Configuration Sequence

Post by Carlos » Wed Jul 30, 2014 10:05 pm

test but I am doubt if it works, if it works you have one month of active communications.
119931MP
AMTU 69W3 UU5D 4PEU V6J2 6THY BKDR ADET BC

115110NA
B7IN GD2H Q45R PDDN VU3I ENSD TAEF BAK8 3D

tvk2650
Posts: 6
Joined: Wed Jul 30, 2014 6:31 am

Re: FactoryLink v6.5.0 Serial and Configuration Sequence

Post by tvk2650 » Thu Jul 31, 2014 6:34 am

unfortunately, it doesn't work.
I got a messagebox "Configuration sequence incorrect and not accepted"

tvk2650
Posts: 6
Joined: Wed Jul 30, 2014 6:31 am

Re: FactoryLink v6.5.0 Serial and Configuration Sequence

Post by tvk2650 » Mon Aug 04, 2014 7:45 am

Is it also possible to virtualize the Factorylink PC? The customer says it is not possitble to covert the physical machine to a virtual one, because of hardware encryption of the Factorylink package... (not possible to run the application after converting to virtual machine)

Is there a way to solve this problem?

Post Reply