Atals copco Elektronikon 1900 0700 08 screen problem

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Atals copco Elektronikon 1900 0700 08 screen problem

Post by mohdabshr » Thu Aug 22, 2013 12:20 pm

Hi
we have atals copco air compressor it is sceen Elektronikon 1900 0700 08 screen give alarm system failure 11 how to solve this alarm.


mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Atals copco Elektronikon 1900 0700 08 screen problem

Post by mohdabshr » Sun Oct 13, 2013 3:31 pm

thank you very much aakodi but also I need to know the meaning of system failure -104 and if you have manual for this controller please share it.

Rzouga
Posts: 2
Joined: Thu Dec 19, 2013 2:58 pm

Re: Atals copco Elektronikon 1900 0700 08 screen problem

Post by Rzouga » Thu Dec 19, 2013 3:04 pm

Hi all,
we have a problem with an Atlas Copco compressor and it has ELEKTRONIKON PLC and on the display there is nothing but this number "100100000000".
Can someone help me please to understand what does this mean and how to resolve it.
Thanks

Rzouga
Posts: 2
Joined: Thu Dec 19, 2013 2:58 pm

Re: Atals copco Elektronikon 1900 0700 08 screen problem

Post by Rzouga » Mon Dec 23, 2013 10:23 am

No one is able to help me about this?

zimy88
Posts: 1
Joined: Wed Aug 12, 2015 7:19 am

Re: Atals copco Elektronikon 1900 0700 08 screen problem

Post by zimy88 » Wed Aug 12, 2015 7:33 am

Morning all has anyone found a solution to the error code on the Elektronikon 100100000000.
I hav got this same error on our Compressor and am struggling to find a solution to the error.
Any help would be greatly appreciated.

Gellager
Posts: 9
Joined: Mon Feb 04, 2019 6:00 am

Re: Atals copco Elektronikon 1900 0700 08 screen problem

Post by Gellager » Wed Aug 07, 2019 10:45 am

Hello!
Error 200 occurred, it was reset, and the compressor started and started.
Then he stood for a while and when turned on, writes 110100000000 on the screen and does not respond to buttons.
Maybe new information appeared and someone solved this problem? (oo)

usefi5961
Posts: 27
Joined: Sat Aug 20, 2011 11:16 am

Re: Atals copco Elektronikon 1900 0700 08 screen problem

Post by usefi5961 » Wed Aug 07, 2019 12:53 pm

you need dump file for eprom and time keeper with correspond the serial number of comperessor,and nobody have software for doing it else atlas copco company.this software is special that all serial numbers of atlas comperessor can with reprogram by using it.


Post Reply