[?]: how upgrade the Wonderware S7 Server I/O

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
ntban
Posts: 13
Joined: Thu Aug 09, 2007 6:46 am
Location: Vietnam

[?]: how upgrade the Wonderware S7 Server I/O

Post by ntban » Wed Oct 05, 2011 7:58 am

Dear Friends,

I'm preparing to upgrading my Wonderware Intouch project from V7.0 to V9.0
In My Old project (V7.0) people used the "Wonderware S7 Server I/O" to connecto with the Siemens S7-300 CPU

Please, Anyone can tell me how can I upgrade the "Wonderware S7 Server I/O" ?!

Where I can find this software ?!

Thanks,
(ban)

Umencho
Posts: 508
Joined: Mon Jul 16, 2007 12:28 pm
Location: Europe

Re: Wonderware S7 Server I/O

Post by Umencho » Wed Oct 05, 2011 9:09 am

Hello,

Use in built in Intouch System Management Console (SMC) together with DAS S7 or DAS SIDIRECT Server depends of how is established communication between PLC and SCADA (MPI, Profibus, Ethernet). I think here have a links for download the same.

ntban
Posts: 13
Joined: Thu Aug 09, 2007 6:46 am
Location: Vietnam

Re: [?]: how upgrade the Wonderware S7 Server I/O

Post by ntban » Wed Oct 05, 2011 4:23 pm

Thanks Umencho,

In My Project, We connect by the MPI ==> So we should use DAS S7 ?!

Where I can find the (dlink) ?!

Ban

Umencho
Posts: 508
Joined: Mon Jul 16, 2007 12:28 pm
Location: Europe

Re: [?]: how upgrade the Wonderware S7 Server I/O

Post by Umencho » Wed Oct 05, 2011 5:35 pm

Yes, in that case you need DAS S7.
Make a registration and search for it there https://wdn.wonderware.com/sites/WDN/Pa ... loads.aspx

Oldman
Posts: 797
Joined: Tue Aug 21, 2007 7:05 am

Re: [?]: how upgrade the Wonderware S7 Server I/O

Post by Oldman » Wed Oct 05, 2011 5:48 pm


ntban
Posts: 13
Joined: Thu Aug 09, 2007 6:46 am
Location: Vietnam

Re: [?]: how upgrade the Wonderware S7 Server I/O

Post by ntban » Thu Oct 06, 2011 3:52 am

Thanks All,

The problems now is :
- My old project (V7.0) use the connection as instruction in this link : http://fa.sammicomputer.co.kr/TECH/html/t000961.htm
- But now I don't know how to convert the old configuration file to new project (convert configuration file from old software to DAS S7) ?!

Could anyone can tell me more detail about this ?!

Tons of thanks,
Ban

Umencho
Posts: 508
Joined: Mon Jul 16, 2007 12:28 pm
Location: Europe

Re: [?]: how upgrade the Wonderware S7 Server I/O

Post by Umencho » Thu Oct 06, 2011 6:23 am

Basically is not possible. :roll: But you don't need it. Take a look at http://fa.sammicomputer.co.kr/TECH/html/t001123.htm . Just replace CP1613 with your CP...

Post Reply