[REQUEST] FIX32 VER.7

Прочие SCADA: iFix, InTouch, Citect, ...
af.naderi
Posts: 124
Joined: Sun Mar 15, 2009 8:06 am
Location: Europe

[REQUEST] FIX32 VER.7

Post by af.naderi » Wed Oct 07, 2009 12:00 pm

I need FIX32 VERSION 7 OR 6.15
If anyone have, Please Upload.

Regards
Top
dibolo
Posts: 74
Joined: Fri Mar 03, 2006 10:18 am
Location: Europe

Post by dibolo » Wed Oct 07, 2009 2:09 pm

do you have a project from this scada?

Code: Select all

http://plcforum.uz.ua//fix32.rar
Last edited by dibolo on Tue Oct 13, 2009 7:45 pm, edited 1 time in total.
Top
af.naderi
Posts: 124
Joined: Sun Mar 15, 2009 8:06 am
Location: Europe

reply

Post by af.naderi » Mon Oct 12, 2009 9:35 am

1-we have a fix32 ver.6.15 project and we want to migrate this project to fix32 ver.7 or ifix, and then edit pictures , ...
can u help me?

2-your link dosn't work.
Top
dibolo
Posts: 74
Joined: Fri Mar 03, 2006 10:18 am
Location: Europe

Post by dibolo » Mon Oct 12, 2009 1:13 pm

can you send this project it to me?i will fix the link right now
Top
deeboo
Posts: 7
Joined: Mon Mar 02, 2009 2:18 pm
Location: America

Post by deeboo » Mon Oct 12, 2009 4:42 pm

If you are going to migrate from 6.15, I'd recommend going to iFix instead of Fix 7.

Getting Fix to run on newer OS proves tricky at times, You won't run into the same problems w/ iFix(and fix desktop). Plus you get the ability to pull tags out via OPC into a data collection system if you are running one.
Top
af.naderi
Posts: 124
Joined: Sun Mar 15, 2009 8:06 am
Location: Europe

Reply to DeeBoo

Post by af.naderi » Tue Oct 13, 2009 6:23 am

thanks to your solution.
but i have another problem: i haven't convertor to migrate my project from Fix32 Ver. 6.15 to IFix.
Do you have this convertor? Please help me.

Regurds
Top
deeboo
Posts: 7
Joined: Mon Mar 02, 2009 2:18 pm
Location: America

Post by deeboo » Tue Oct 13, 2009 9:03 pm

Assuming you have iFix already, you can grab the guide to doing migrations from http://support.gefanuc.com/support/inde ... ctp=search <- if the link doesn't work, search for "Fix Migration" on the fanuc support site.

Code: Select all

http://support.gefanuc.com/support/index?page=kbchannel&id=S:KB2532&actp=search
You should not need any software outside of the full Fix and iFix installations.
Top
af.naderi
Posts: 124
Joined: Sun Mar 15, 2009 8:06 am
Location: Europe

Re: [REQUEST] FIX32 VER.7

Post by af.naderi » Sun Oct 18, 2009 5:31 am

dear dibolo
i download your link and extract it. but i don't know why it doesn't extract.
winrar show this error:
"CRC failed in the encrypted file fix32\fix_99.rar (wrong password ?)"
i extract file with "dibolo" password. is it right?
Top
dibolo
Posts: 74
Joined: Fri Mar 03, 2006 10:18 am
Location: Europe

Re: [REQUEST] FIX32 VER.7

Post by dibolo » Sun Oct 18, 2009 8:23 am

rar pass:guess_dibolo
i'm watting for the project. :evil:
Top
af.naderi
Posts: 124
Joined: Sun Mar 15, 2009 8:06 am
Location: Europe

Re: [REQUEST] FIX32 VER.7

Post by af.naderi » Sun Oct 18, 2009 11:50 am

hi
i send links in rapidshare to your email address :...

...
...

regards
Last edited by af.naderi on Wed Oct 21, 2009 8:52 am, edited 1 time in total.
Top
af.naderi
Posts: 124
Joined: Sun Mar 15, 2009 8:06 am
Location: Europe

Re: [REQUEST] FIX32 VER.7

Post by af.naderi » Mon Oct 19, 2009 11:00 am

Do you have Crack for FIX32 Ver.7 ?
Top

Return to “Other HMI”